2.5A/6.1uH Input Reactors

Specifications

                                                        251A 0.667 mH Three Phase Line Inductors  

Welcome to Huashenglong low voltage reactor!

The product shown on this page is our line reactor, output reactor and DC reactor that are compatible with FUJI inverter, FVR004G7S-2EX, FRN0.4G/P11S-4CX, and more. For example, our HSL119-F01 three phase line reactor (ACR) is designed to work with FUJI inverter ACR2-0.4A in the 3AC 200 +10%-15%V power system, while the HSL424-F16 DC Reactor (DCR) is compatible to FUJI inverter DCR4-0.75A. With the operating voltage of 3AC 380~440 +10% -15%V, the HSL220-F14 three phase output reactor is used for OFL-0.5-4A FUJI inverter. Please refer to relevant parameter form for detailed specifications of the compatible reactor with FUJI inverter.

Features

1. The line reactor greatly reduces catastrophic drive failures due to transient over-voltage.

2. The low voltage reactor decreases nuisance over-voltage trips due to line transients, drastically:

(1)Utility power factor correction

(2)Switching large AC motor loads

(3)Switching large transformers

(4)High AC line conditions

3. Line-side fuse operation during unsymmetrical voltage sags is reduced to the minimum:

(1)Utility system line-to-ground faults

(2)Unbalanced phase currents

4. The line reactor can also prevent harmonics and effectively improve power factor.

Functions

1. A line reactor can be used for adding line impedance.

2. The inductor also serves to reduce harmonics.

3. It is able to compensate for a low inductance motor.

4. The low voltage reactor acts only as part of a filter to reduce reflected wave.

Protected By Water-Repellent Cloth, Secured and Packed In Wooden Case

Delivery Time

4-30 Days Depending On Quantity Ordered