Innovated All in one video wall controller with USB auto display auto mapping support irregular video wall

Innovated All in one video wall controller

with USB auto display auto mapping support irregular video wall

“All-in-one” is an innovative commercial display Video Wall solution. The solution uses single chip and cooperates with FPGA wholeheartedly, overturning traditional Video Wall solutions and enhancing the operational and installation convenience of programs.

Comparing with traditional solutions, it has the following advantages:
1. Be easy and convenient to operate and install
Don’t need VGA, DVI or HDMI Splitters ; do not need VGA or HDMI cables; do not need RS-232 serial cable; do not need to set ID address; it only needs a Cat-6 Ethernet Patch Cable between splicing units and all the signals just need to connect the first splicing unit to finish the installation of a project. Therefore the cost of the project is greatly reduced. There are two operating modes: remote operation and control software operation. Realize the automatic allocation of ID addresses and Video Wall with only one click.

2. The quantity of splicing unit is not restricted and the splicing is stable and reliable.

Traditional Video Wall adopts splitters cascade for the project is oversize, but a lot of splitters cascade will cause signal attenuation and the reduction of system stability. “All-in-one” uses frequency multiplication patented technology to ensure each splicing unit can receive the same signal intensity as that of original signals, thus ensuring system stability; and the quantity of splicing unit is not restricted.

3. Adapt patent image processing algorithm and the display effect is greatly improved Integrate multimedia decoding and sound effect functions.

It only needs an external storage device to realize the automatic loop playback of commercial advertisements and Hollywood blockbusters on the Video Wall, the sound can be adjusted arbitrarily through remote control and control software, fundamentally settling the difficulty that to realize the play of multimedia commercial ads on Video Wall with storage devices (USB flash disks and mobile hard disks) only, i.e., video play via USB flash disk splicing, and video play synchronously

4. Settle the problem that dynamic pictures played on traditional Video Wall are not free-running fundamentally and make the overall Video Wall be a super-display.

5. Extendibility: Any devices with analog VGA output and digital DVI/HDMI output can be displayed on wall without additional cost.

Sample diagram

For example(Take 3x4, 12pieces video wall as a example)

Traditional mode: 12 pieces traditional video wall driver board+1 FHD player box+HDMIsplitters

+cables+13 RJ45 cables, need set up complicated address code.

Innovative mode: 1 main board+11 vice board+1 U drive+13 CAT6 cables, no need set up address code

Features:

1, USB flash/HDD/SDD automatically combination &display, no need PC or any player box.
2, Accept several signals input:HDMI,VGA,DVI signal

3, All loops just need CAT6 cables,noneed HDMI and other signal cables &splitters

4, Auto address code assignment, say goodbye for complicated addressing works

5, Very simple installation &operation work, no limits for monitor numbers, synchronous, no time delay