COATING FOR VACUUM METALLIZING (UV COATINGS)

I.     FEATURES:

  *   Appearance: light yellow or transparent liquid

  *   Apply method: spray by airgun or roll by roller machine

  *   Cured immediately via UV oven

  *   High solid content ,  low VOC, eco- friendly

  *   High build, toughness, high hardness film

  *   Good chemicals, water resistance and good weather resistance

  *   Good mar and scratch resistance

II.      CLASIFICATION:

1.       UV Primer: Main function of this kind is increasing adhesion between the film and  substrate. Especially, apply for pp metal special substrate.

2.  UV  Basecoat

3.   UV  Topcoat

III.      GENERAL PROCEDURE:

1.     Substrate treatment:Cleaning, make sure the substrate is clean.
2.     Primer: Depending on substrate  characteristics, Primer is used for improving the film adhesion.
3.     Basecoat : Depending on the kind of substrate (hard or soft) to make suitable basecoat selection.
4.     Topcoat

Important note: Must stir coatings before using.

IV.     PRESERVATION:

*   Must store the UV coating in cool place, keep far away from heat sources (flame, machines,..).

*   Paint cans after using must be closed tightly. Avoid sunlight, dust, solvent and any straight solutions.

V.   SAFETY

*   Components in UV coatings cannot be cured themselves without UV, therefore they are easy to get through skin. Safety working gloves and gauze mask are a must when contacting product. Clean thoroughly at once by soap within 60 minutes since skin touch.

*   Keep out of eyes, skin and mouth.

Quanjiao Dazhe Ink Co., Ltd.was   Founded in 2002 ,and is one of the toppes enterprise of  UV curable coating in China.
The company is a national High-Tech Enterprise which combine R&D, manufacture, sales and service together.

With good quality of products and service, we have built a long term relationship with large and medium-size enterprises both in China and abroad.Our products are widely used in decorations,cosmetics,mobile phones, digital cameras, computers, home appliances, automotive components and so on.