YN Lube Oil Processing Plant Hydraulic Oil Cleanning Machine Mechanical Oil Machine

Specifications

Appication:

Widely applied to power, metallurgic, mine, mechanical, chemical, manufacturing and food processing industries for purification of hydraulic oil, freezing machine oil, solute press oil, gear oil, vacuum pump oil, gas engine oil and heat treatment oil.

Technical Parameter

type:   ZJC0.6 KY-R

treatment medium:   various kinds of lube oil

Flow rate:     more than 600Liter per hour

Working vacuum:   0.07-0.101 below mpa

Working pressure::   lower than 0.6mpa

Working temparature of oil:   45-65degree centigree

Working power:   50Hertz  380volt  3-phase  4-wire

Total electric power 7.5kilowatt

Inlet/outlet diameter:   20/20millimeters                

Overall size:   130×105×125

Working noise:   lower than 78decibel

Working condition:  can work spasmodicly or continuously

Average continuous working time:   more than 5000hours

Oil treatment index

Water content: less than 100ppm

Gas content: less than 0.2percent

Filtering accuracy: lower than 4um

Cleanness: 8grade of NAS1638 Standard

Oil appearance: transparence

Technical features:

1. water cyclic vacuum pump , It can work continuously (also can use for Maintenance)

2. efficiently remove free water, emusifications and dissolving water. And make water   content lower than 50ppm

3. adopt multi-stage import filtering element, high filtering accuracy and strong pollutant-absorbing ability.

4. its oil level control adopts photoelectric mode, and there is no possibility of spray.