customization welcome opening mould electrical distribution box

The smart indoor distribution box complies with the standard of national distribution box and meeting the demand of home appliance.

It has set up 10 lines covering kitchen, heater, sockets, conditional, lighting and one spare line, and touch display to operation each function.

The feature is below:

l.Monitor function:  shows the voltage, current, power and energy consumption of each circuit constantly

2.Statistical Function: calculate the total energy consumption and monthly energy consumption of each circuit

3.Energy directions function

4.Caution function: over load protection, when the circuit is overload to its pre-set load, it will set alarm

5.Clock function: display time, date

6.Lightning protection device

7.Performance test to home appliances

8.Energy saving and environmental 

9.Standard design, Easy installation

l0.Fashionable shape design, different color face integrated with different home decorative style

Fuctions:

1.Energy indicator light

A: There is three colors stand for three levels, blue means low energy consumption, orange means moderate energy, red means high energy consumption. 

B: the indicator light has seven degrees, each degree stands for 1000W, when the signal shows the seventh level, it means the energy capacity has exceeded 56A/12.3W, the consumption is 12kw/h, it will set alarm three seconds one time.

2.indicator light for total electricity consumption:it shows electricity quantity once it is installed, when it reaches 99999kw, all data will be cleared zero then start to calculate again(normal show year like 2015)

3.data display: display electrical condition of each circuit

A: display current of each circuit with amp, the smallest current showed is 0.1A

B: display power or energy consumption condition of each appliances with unit W, the smallest showed is 1W
C: display appliance’s power of each circuit, power condition can be set up with zero clearing freely to know detailed power consumption in certain time
D: display voltage of each appliance timely

4.display clock, easy to set up through the touch display screen on the right( the time is always at work

5.display monthly power consumption of each circuit( normal state shows every date like 11-09)

ntrol display: control and set clock, energy condition, power consumption

7.open the faceplate cover control inner circuit line

picture:

Real show: