Epoxy frp tube resin Fiberglass Wound Pipe

Specifications

Epoxy resin  fiberglass Wound Pipe :

 1) Excellent  mechanical strength,

 2) High mechanical load

 3) Endure high Voltage ,10-1000KV

 4) Light weight

 5) Adjust the winding angle to satisfied with your any mechanical strength demand

 6) Thickness is from 1mm to more
 7) Work temperature:B (130C)/ F(155C)/ H(180C)/ 220-250 C

Epoxy fiberglass filament wound tube is composed of continuous filaments with controlled orientation in a matrix of epoxy resin.
Epoxy fiberglass filamentwound tube is composed of continuous filaments with controlled orientation in amatrix of cured epoxy resin. It isproduced with varying angles of fiberglass filaments winding. The angles of winding can be varied to suitdifferent applications and strength requirements. Typically, fiberglass filaments are wound intwo directions across each other and at an angle of 50-55 degree to thelongitudinal axis of the tube.
Epoxy fiberglass filamentwound tube has good electrical insulation properties and excellent moistureresistance. It offers excellentresistance to weather and ultraviolet rays. Epoxy fiberglass filament wound tube is light and strong. Its applications include high voltage insulators,fuse tubes, antennas, battery casings, bushings of high voltage equipment,railroad bushings, bearings, collars, tool handles, pressure tubing,

Diameter range: from 4mm to 500mm

We can design and make it by your drawing.