Model LS900 Tyre Wire Drawer For Waste Tire/ Tyre Recycling Machine

Condition	New		Type	Tire Machine
Tire Machine Type	Tire Recycling Machine		Place of Origin	Jiangsu, China
Brand Name	WX		Model Number	LS-900
Voltage	380v, customization		Power(W)	15kw
Dimension(L*W*H)	1.9*1.06*1.36m		Weight	680kg
Certification	ISO9001-2008,SGS		Warranty	Lifetime
After-sales Service Provided	Engineers available to service machinery overseas

Specifications

1.11Years'experience
2Brand pulverizer,shredder,sifter,separator
3Lifetime warranty
4.Lowest price
5.ISO9001SGSCertification

Tyre Wire Drawer For Waste Tire/ Tyre Recycling Machine

 

Advantage:

1.11Years'experiences manufacturer

 

2.China expert on waste rubber pulverization

 

3.Brand pulverizer,shredder,crusher,screener,separator,grinder

 

4.Lifetime warranty,lowest price

 

5.ISO9001,SGS certification

 

 

 Summary:

 

  Since the pollution from the growing waste tyres of vehicles, it has put the treatment of waste tyre before everybody, however, it is frequent to see the re-use of steel. When comminuting the tyre directly, its thick steel wire inside makes a biggest test to the service life and material quality of cutter.

 

 

Usage:

 

Removing the whole steel wire of the inner ring of radial tyre with a diameter less than or equal to 1200mm.

 

Structure & Principle:

 

 

Switching on the power to start the motor, making the two notches of the disc under an open state completely, then placing the tyre into the press vertically (See the figure above); afterwards, switching on the motor (two hooks will rotate upwards simultaneously) . After the whole steel wire is removed away from the tyre completely, it can then be allowed to take the steel wire out of the press.

 

Main Technical Data:

 

Model		Power(kw)	The Max Journey		Matching Tire	Pull(Newton)	Frequency(time/min)	Weight(kg)	Overall Dimension L*W*H   (m)
900-type		15	800-type		≤1200	11	2	680	1.9*1.06*1.36

 

Wearing Parts Maintance:

 

Type	Material	Operation time	Repairing method	Instruction
Bearing		5000	Replace	General part
Drawing hook	Alloy	10000	Build up welding again, then polish or purchase	tungsten carbide surfacing electrode
Cross recess mould	Cr12,HRC55~58°	20000	Replace	Purchase

 

Delivery time: 25-35 days after receiving 30% deposit.

 

Service: Provide Installation, maintenance and technical guidance for life.

 

Guarantee:Quality free for One year,maintainance for lifetime

     

      P.S:The quality guarantee is 12 months after finishing the trial run of machines which has been shipped to the buyer side. If any part (excluding easily damaging parts) is found defective in quality within warranty period, we would like to replace it for free. After warranty, spare parts can be replaced based on favorable price.

  

      We produce rough crusher, shredder,automatic tire cutter,bead-wire drawing machine,tire splitting machine,separator,screener,conveyer and all kinds of waste tire recycling machines,and with the strong technology we can accept custom made!

Tel: +86-510-66200163

cell phone: +86-151-6165-5901

Contact:Mandy Van

Skype:mandy20120903