high quality tire recycling machine into rubber powder making line

rubber powder from tyre recycling machine

use main to produce rubber powder from the waste tyre

inclding :

1.Ring  cutter

This machine mian to cut the inner dimater of the tyre, and cut the side of the tyre to the next step of segmentation.

2. Loop machine

 steel ring seperator by double cell extrusion, and the two grooved roller speed differential will ring in the mouth than the wire separation, maintaining good physicalproperties of steel wire, rubber can then use it to avoid environmental pollution.

3.strip cutter

trips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for specialmaterials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.

4.block cutter

Cutting machine can cut a tire strip, cut block, tool for the alloy cutting tools, nearly 9-11 tons per day, cutting tools are not sharp and repeated grinding

5.  tyre crusher (bearing bush) it is host machine

Host (broken machines) mainly used for grinding tyres, line tyre, wire tyre and other rubber products, make the powder, and achieve the fineness

afte this  there are conveyor equipment and the shaking equipment

6. Big conveyor equipment

7. Small  conveyor equipment

8. Big Magnet separator

9.Small magnetic reparator

10.big  Shaking screen

11.small shaking screen

Processing method:

Physic mechanical crushing method at normal temperature of waste tyre:no chemical raw material is required,no waste gas,washte water and soot are discharged, and the cooling water of the equipment is reused,no emission,equipment noise is within the range specified by the country(GB20055-2006),fineness of rubber powder produced by it is adjustable(10 meshes to 30 meshes),take waste tyre as example,the process is as follows:breaking down,crushing,filtering,magnetic separating,grin-ding,then the finished products are produced.