Kangdawei Chimney anti-corrosion interface rubber
- shanghai
- T/T
You May Like
Product Details
| Main Raw Material | Other, silicone | Usage | Other, Chimney | |
| Brand Name | Lianti | Model Number | KDW-116/KDW-982/KDW-987 |
Product Description
Low viscosity, easy to spray, excellent adhesion performance, easy to use and cured fast at room temperature.
2. KDW-982 (Chimney anti-corrosion masonry rubber):
With good thixotropy, easy to operate, the rubber would not flow when operated on the facade. Whether component A and B mixed evenly could be confirmed by the change in color, it is easy to control during the construction. It is convenient to add component B, the on-site operation is simple, according to the different season and construction site condition, it is convenient to change the ratio of component A and B and control the operation time after mixing, which meet the requirements of construction and curing time.
3. KDW-987 (Chimney anti-corrosion interface rubber):
With modest viscosity, not easy to flow, easy to smear and use. The product will cure at room temperature, no strings attached, cured into elastomer by absorbing moisture in the air.
1. KDW-116 (Prime coating):
1) Clean the surface:
Clean the surface of chimney inner wall as general surface, remove dust and greasy dirt.
2) Sizing:
Take the prime coating out of the package, spray it on the surface of chimney inner wall with professional spraying tools, and just dried at room temperature.
2. KDW-982 (Chimney anti-corrosion masonry rubber):
1) Mix rubber:
The recommended ratio is 10:1(component A: component B), and the operation time would be 1 hour when the operation temperature is 25℃. Increasing or decreasing the amount of component B within ±15% to speed up or slow down the curing speed.
2) Stir:
Completely stir the rubber with electric tool or other stirrer, the mixed rubber should be black, if it is white or too shallow, or local color is too deep, it is needed to stir until evenly colored.
3) Paste:
Evenly smear the mixed chimney anti-corrosion rubber on foam glass bricks or light vitreous tiles, ensure that the thickness of rubber between bricks and chimney inner wall is not less than 3mm and the thickness between bricks is not less than 1mm.
Clean the surface of chimney inner wall as general surface, remove dust and greasy dirt.
2) Sizing:
Take the rubber out of package, smear smoothly the rubber on the surface of chimney inner wall with professional tools, let it cured at room temperature.
3) Cure:
The product is cured at room temperature, and it is solidified into elastomer by absorbing moisture in the air, whether completely cured depends on the thickness. (2~3mm thickness, at 25℃, humidity of 50%, it could be completely cured within 24 hours)
Contact Us
- Liyang Kang Dawei Industrial Co., Ltd.
- Contact namejinjin hu Chat Now
- Phone86-519-87985663
- Address8#Yunmei Road,Tianmuhu Lake Township Industrial Park ,Liyang City, Jiangsu Province, Changzhou, Jiangsu
Product Categories
| Anti-pollution flashover coating | Chimney anti-corrosion coating | Electronics sealant | New Products |
| Other | Solar panel sealant |
New Products
-
non-toxic adhesives
-
white and liquid RTV silicone sealant
-
high temperature RTV silicone sealant
-
310ml packing electrical RTV silicone sealant
-
electronic industry silicone adhesives
-
one-component RTV silicone rubber
-
two-component RTV silicone rubber
-
aging resistance adhesive
-
mositureproof silicon sealants
-
Kang Da Wei white silicon sealants
-
Protect against high Humidity RTV silicone adhesive
-
Single component silicone sealants
-
Single component silicone sealants
-
cold-resistant and hot-resistant RTV adhesive sealants
-
anti-corrosive and bears the high low temperature silicone sealants
-
anti-corrosive and bears the high low temperature silicone sealants
-
black/white used for solar cell module
-
adhesive used for Junction box and backplane
Popular Searches
- Acrylic Paints
- spray paint
- car refinish
- auto paint
- varnish
- wall coating
- car paint
- powder coating
- primer
- automotive refinish
- putty
- wall paint
- Color Paint
- Automotive Paint
- Acrylic Spray Paint
- Car Refinish Paint
- Aerosol Spray Paint
- Auto Refinish Paint
- Latex Paint
- Exterior Wall Paint
- drying agent
- Appliance Paint
- single component paint
- appliance coating
- plastic paint
- single component coating
- industrial paint
- industrial coating
- metal paint
- thermoplastic acrylic resin
Recommended Products
- NANYAEpoxy resin Best E-44 Epoxy 44 – ISO 9001 Certified Manufacturer
- Marine Grade Epoxy 44 – Saltwater Resistant Hull Repair Kit
- RoHS Compliant Epoxy Resin 44 – Food Safe Countertop Coating
- High Transparency Epoxy 44 – Crystal Clear for Art Casting
- Low VOC Epoxy Resin E-44 – Eco-Friendly Industrial Adhesive
- Flexible Cure Epoxy 44 – Impact Resistant for Tooling Molds
- Wholesale E-44 Epoxy 44 – Factory Direct Price for Bulk Buyers
- OEM Epoxy Resin 44 – Custom Hardness/Viscosity (MOQ 1 Ton)
- Waterproofing Epoxy for Roofs – E-44 Resin with Fast Cure
- Anti-Corrosion Epoxy 44 (E-44) – Chemical Tank Lining Solution
- Concrete Repair Epoxy Resin 44 – Crack Injection & Floor Coating
- Aerospace Epoxy 44 – Lightweight Composite Molding Resin
Find Similar Products By Category
- Chemicals > Paint & Coating > Building Coating
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
jinjin hu
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile