Hot sale high quality Milling Kaolin to dry powder equipment

The Milling Kaolin to dry powder equipment  is relevant towards the grinding and processing of more than 280 types of non-flammable and non-explosive materials with hardness lower than 7 and humidity lower than 6% in mining, construction ,chemical industry and metallurgy, such as barite, calcite, feldspar,talcum, marble, limestone, clay, glass. The fineness from the finished product could be adjusted from 100 mesh to 325 mesh according to specific requirements of clients.

Features of Milling Kaolin to dry powder equipment    :

1,The Milling Kaolin to dry powder equipment  for vertical structure, covers an area of relatively small, systemic strong, both from the rough machining of raw materials and to transport to pulverizing and final packaging, can form an independent production system.
2, Milling Kaolin to dry powder equipment , compared with other milling equipment, its high flux screening rate, screening rate is as high as 99%, is the other milling equipment in general.
3, Milling Kaolin to dry powder equipment transmission device adopts closed gear box and pulley, is stable and reliable operation.
4, Milling Kaolin to dry powder equipment , important parts adopt high quality castings and material manufacturing, process fine, rigorous process, to ensure the durability of the whole equipment
5, The electrical system adopts centralized control, milling workshop basic can achieve unattended operation, and maintenance aspects.

Working Principle of Milling Kaolin to dry powder equipment  

First the materials are crushed by the jaw crusher,then the crushed materials are transferred to a hopper by the elevator ,fed uniformly,quantltatively and continously by the vibrating feeder to the grinding chamber of the main frame for grinding.The grinded particles are brought up by the air current of the blower into the classifier for classification.The particles with the required fineness are brought up by the air current through the pipe into a collector for separation and collection,the finished particles are discharged from a pipe outlet.Because of some moisture contained in the materials to be grinded,the heat resulting from grinding leads to the vaporized air which changes the airflow volume.Moreover,the outside air inhaled from the narrow gaps of the piping connections can increase the volume of aircurrent.Therefore,it is necessary to adjust redundant air pipe between the blower and the main unit for keeping the balance of the air current.Then the redundant air is quided into a cloth bag of a dust cleaner to collect the fine power in the air.Finally, the redundant air is discharged after purfication.

Application of Milling Kaolin to dry powder equipment   :

Milling Kaolin to dry powder equipment  is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, and mining etc. It can produce powder from more than 280 kinds of non-flammable and non-explosive mineral materials with Mohs hardness below 7 and humidity below 6%, such as barite, limestone, quartz, calcite, granite, porcelain clay, basalt, gypsum etc.

Main specification of Milling Kaolin to dry powder equipment   :