SBM High Quality Milling Machine Lubrication With CE

milling machine lubrication  :

This kind of  milling machine lubrication  is a new kind of large scale power grinder which is designed specially to solve the problems of low capacity and high consumption of industry mills. With a decade of years' research of mills, The milling machine lubrication   is designed and manufactured based on our advanced design idea, and in combination with the European technology and the market demand.

The milling machine lubrication adopts reliable structure and reasonable process flow, integrated with drying, milling, classifier, elevator. Especially, it can fully meets the requirement of clients in the high production of powder and its main technical and economy indicator reaches the international level.

milling machine lubrication features:

1. Low Investment Cost. This milling machine lubrication  itself can crush, dry, grinding, classifying, so the system is simple, and occupation area is about 50% of ball mill system. In addition, it can be installed outside, so it will reduce a large number of investment costs.

2. Low Operation Cost.   High efficiency: roller compacted materials directly onto the grinding disc, so power consumption is low. Compared with ball mill, it saves energy consumption by 30% ~ 40%. Less wear and tear: As the roller is not in direct contact with the disc, and material of the roller and liner is high quality, so life lime is long.

3. High Drying Ability.  As the hot air inside contacts directly with the material, drying ability is higher, and milling machine lubrication  saves energy. By regulating the air temperature, milling machine lubrication can meet requirements with diffirent humidity.

4. The stability of product quality.  As the material stays in the milling machine lubrication  for a short time, it is easy to detect and control the product particle size and chemical composition, to reduce duplication of milling, stable product quality.

5. Environmental protection.  The milling machine lubrication  with small vibration, low noise, and the overall sealing. The system works under negative pressure, so there is no dust going out. It meets the requirements of the state Environmental Protection.

The production line of milling machine lubrication:

The motor dives the grinding table to turn through the speed reducer. At the same time, hot air comes into the milling machine lubrication  from the air inlet. The materials fall down the centre of grinding table from the feeder. Because of the centrifugal force, the materials move to the edge of grinding table from the centre .The materials are crushed by the grinding roller when by pass of the groove on the grinding table. The crusher materials continue to move to the edge of the grinding table until taken away by the airstream. Then the bigger materials fall down the grinding table and the process of crushing continues. When the materials in the airstream pass the separator on the top of the milling machine lubrication , the materials fall down the grinding table from the taper filler under the force of guide leaf blade. The fine powder comes out with the airstream, and is gathered by the dust catcher of the system. The powder gathered is the final product of roller mill. In the process of the contact of airstream , the materials are dried to meet the clients' need at the proper moisture. Through the adjustment of the angle between the separator and the leaf of wind's direction (not suitable to the small type of LM vertical  milling machine lubrication  ), and also the speed of the separator rotor, it can reach the proper fineness of the materials.

Model and Technical Date of milling machine lubrication :