Tungsten carbide cutting insert brazed insert with various grade and type available

Tungsten Carbide Cutting Insert Brazed Insert with Various Grade and Type Available

1. Product Picture for Type B2:

--Brazed insert with ground finish

-- Brazed insert with blank finish

2. Product Application:

With a small piece of tough carbide insert brazed to the tip of a steel shank, carbide tool can be

used for machining most materials including wood, plastic, aluminum, brass and steel etc.

3. Product Specification:

--Physical and mechanical properties of main grades:

--Types for brazed tips: available in ISO standard A, B, C, D, E

We also offer these brazed insert in China domestic standard type:

-- Tips for using of brazed tool:

1) Structure of brazed cutting tool should have enough rigidity;

2)  The brazed tips should be fixed strongly onto the holder;

3)  Check and ensure good condition of the holder before brazing;

4)  Choose the proper welding material;

5)  Choose the proper welding flux;

6)  Use correct sharpening method;

7)  Mount the brazed cutting tool properly;

8)  Resharpening the brazed cutting tool properly.

4. Packing: Plastic boxes inside with carton outside. Other packaging upon request.

5. Quality Control System:

Everything single piece will be inspected in and after production to make sure it can match your

requests and we guarantee full payment returned if any quality problems.

6. Transportation: Fast and reliable delivery via air, sea and land transportation.

7. About us:

Please feel free to contact us for any question or inquiry,

we will initially reply you within 24 hours.

Technical Assistance & Inquiries: (86)-731-22278868  Fax: (86)-731-22609167