Beverage bottle filling machine

  Beverage bottle filling machine

 

Specifications

It is an integrated monobloc system including bottle washer,filler & capper, controlled by a PLC.

Beverage/water/juice bottle filling machine

This XGF18-18-6 Wash-filling-capping 3-in-1unit:Beverage bottle filling machine is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery. It can finish all the process such as press bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity.It adopts hanging type conveying-bottle structure to make changing bottle model more convenient,faster and easier.The main machine adopts advanced PLC control technology.The key electric elements adopt international famous products

Main Technological Parameters

Model	XGF18-18-6	Picutre for information
The number of Washing, Filling, Capping	18-18-6
Producing capacity;	6000-8000
The number of bottle(600ml)/hour
Applicable bottle specifications (mm)	φ=50-90mm H=150-310mm ( 500ml)
Pressure (kg/cm2)	0.3~0.7
Motor power (kw)	Main motor 0.25kw
Outside vacuum pump power (kw)	3.13kw
Overall dimension (mm)	2600×2000×2230
(LxWxH)		Weight(kg)	2700

Rinsing part

PET bottles infeed by combination of infeed grippers, equipped with bottle jam protection device, the machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck postion, avoiding bottle mouth thread comtamination caused by rubber gripper block of a traditional bottle clamp. This part is made of SUS 304 stainless steel, the bottle clamp is hygienic and durable.

The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use anti-corrosion maintenance free bearing and the rinser is driven by driving system positioned inside machine frame via gear transmission.

Filling part

Rotary wheel fully made of stainless steel SUS 304

Gravity filling method

Filling valves aer reasonably structured with accurate filling.

Bottle go up and down in the function of cam through elevator to process filling with contact to bottle-mouth.

Level of cylinder is controlled with float-ball

Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.

Capping part

Capper should have highest precision, influence very much with stability and realiable of the filling monoboc. Our capper

features as follows:

Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspection system is applied to control on-off of elevator.

Before sales serbice: as we are keen on provide complete bottled water machine service , we can make design on bottle mould&plant layout sesign service , also ,if you have any special requirement ,we can update our machine on your basic .



After sales Service Terms: we provide one year limited warranty*1  and life long support service for all of our products.
 During the warranty period, if any product purchased from our company malfunctions, we will provide necessary technical support, or even send engineers to solve the problem with the buyer providing proper accommodation, all the fees for transportation(the air tickets to you for economy class), insurance and medicines, and salary for our engineers*2 and 1 translater,the sallary based on USD60 per day.

For detail information ,please contact our  sales manager -John Yi

 4.Touch screen language and manuel language ?

Answer: no matter you are english language man , spanish ..ect... we can get translate the manuel with your requirest language and update the PLC and touch screen with your language , make it easy for your operation .

for more questions please contact with John Yi , we will get reply you at the first time we can !