Huawei AP6310SN-GN Access Point

FOB Price

Negotiable / Piece

1 Piece(Min. Order)

Port Shanghai
Payment TermsT/T D/P D/A Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Shanghai, China		Brand Name	Huawei
Model Number	AP6310SN-GN

Product Description

Huawei AP6310SN-GN Series Access Point

The AP6310SN-GN is an enhanced series indoor single-band Access Point (AP), which supports indoor distributed coverage. The AP6310SN-GN can be used together with the 2G/3G/CATV Signal System, and they share the 2G/3G/CATV indoor distributed system. The AP6310SN-GN is applicable to the indoor wide coverage scenario with signal attenuation and low user density.

The AP6310SN-GN is recommended on large-scale networks where users are distributed in a large area and an indoor distribution system is used, for example, office buildings, business buildings, hotels, airports, and bus stations. The AP6310SN-GN APs provide indoor wireless signal coverage in these scenarios

WLAN features

AP6310SN-GN: complies with IEEE 802.11b/g/n.
AP6310SN-GN: provides a maximum rate of 150 Mbit/s.
Maximum ratio combining (MRC)
Maximum-likelihood detection (MLD)
Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
Short GI in 20 MHz and 40 MHz modes
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
Automatic and manual rate adjustment (the rate is adjusted automatically by default)
WLAN channel management and channel rate adjustment
Automatic channel scanning and interference avoidance
Service set identifier (SSID) hiding
Signal sustain technology (SST)
Unscheduled automatic power save delivery (U-APSD)
Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
Automatic login in Fit AP mode

Network features

Compliance with IEEE 802.3u
Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
SSID-based VLAN assignment
VLAN trunk on uplink Ethernet ports
4094 VLAN IDs (1-4094) and a maximum of 16 virtual APs (VAPs) for each radio
AP control channel in tagged and untagged mode
DHCP client, obtaining IP addresses through DHCP
Tunnel data forwarding and direct data forwarding
STA isolation in the same VLAN
Access control lists (ACLs)
Link Layer Discovery Protocol (LLDP)
Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
Unified authentication on the AC in Fit AP mode
AC dual-link backup and VRRP hot backup in Fit AP mode

Specifications

Item		Description
Technical specifications	Dimensions (H×W×D)	35 mm×130 mm×150 mm
	Weight	0.6 kg
	System memory	128 MB DDR2 32 MB flash memory
Power specifications	Power input	DC 12V±10% POE Power: -48V DC PoE function in compliance with IEEE 802.3af and 802.3at
Power specifications	Maximum power consumption	8.3 W NOTE:The maximum power consumption depends on local laws.
Environment parameters	Operating temperature	-10°C to +50°C
	Storage temperature	-40°C to +70°C
	Humidity	5% to 95% (non-condensing)
	Waterproof grade	IP31
	Altitude	–60 m to 4000 m

Radio Specifications

Item	Description
Radio connector type	N type (Female)
Antenna type	depends on the type of antennas in the indoor antennas system.
Maximum number of concurrent users	128
Maximum transmit power	27 dBm You can adjust the transmit power from the maximum transmit power by 20 dB, with a step of 1 dB. NOTE:Actual transmit power depends on local laws and regulations.
Maximum number of non-overlapping channels	802.11b/g 20MHz: 3 802.11n 20MHz: 3 40MHz: 1 NOTE:The number of non-overlapping channels allowed varies in different countries. For details, see the Country codes & Channels compliance status
Channel Rate	802.11b: 1, 2, 5.5, and 11 Mbit/s
	802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
	802.11n data rate (2.4 GHz)
	GI2=800ns		GI=400ns
	20 MHz (Mbit/s)	40 MHz (Mbit/s)	20 MHz (Mbit/s)	40 MHz (Mbit/s)
	6.5 @ MCS10	13.5 @ MCS0	7.2 @ MCS0	15 @ MCS0
	13 @ MCS1	27 @ MCS1	14.4 @ MCS1	30 @ MCS1
	19.5 @ MCS2	40.5 @ MCS2	21.7 @ MCS2	45 @ MCS2
	26 @ MCS3	54 @ MCS3	28.9 @ MCS3	60 @ MCS3
	39 @ MCS4	81 @ MCS4	43.3 @ MCS4	90 @ MCS4
	52 @ MCS5	108 @ MCS5	57.8 @ MCS5	120 @ MCS5
	58.5 @ MCS6	121.5 @ MCS6	65 @ MCS6	135 @ MCS6
	65 @ MCS7	135 @ MCS7	72.2 @ MCS7	150 @ MCS7
	NOTE:Modulation coding scheme (MCS) index: determines the spatial flow quantity, modulation, coding rate, and data rate. Guard interval (GI): indicates the period in nanoseconds the radio listens between packets.
Receiver Sensitivity	802.11b (CCK): -97 dBm @ 1 Mbit/s -92 dBm @ 2 Mbit/s -92 dBm @ 5.5 Mbit/s -90 dBm @ 11 Mbit/s		802.11g (non-HT20): -92 dBm @ 6 Mbit/s -91 dBm @ 9 Mbit/s -90 dBm @ 12 Mbit/s -87 dBm @ 18 Mbit/s -83 dBm @ 24 Mbit/s -80 dBm @ 36 Mbit/s -76 dBm @ 48 Mbit/s -74 dBm @ 54 Mbit/s
Receiver Sensitivity	802.11n(HT20): -92 dBm @ MCS0/8 -89 dBm @ MCS1/9 -86 dBm @ MCS2/10 -82 dBm @ MCS3/11 -79 dBm @ MCS4/12 -74 dBm @ MCS5/13 -73 dBm @ MCS6/14 -71 dBm @ MCS7/15		802.11n(HT40): -89 dBm @ MCS0/8 -86 dBm @ MCS1/9 -83 dBm @ MCS2/10 -79 dBm @ MCS3/11 -76 dBm @ MCS4/12 -72 dBm @ MCS5/13 -70 dBm @ MCS6/14 -68 dBm @ MCS7/15

Contact Us

Shanghai Chu Cheng Information Technology Co., Ltd.: Contact nameicegreen guan
Chat Now; Phone86-21-58718070; AddressRoom 110, No. 389, Jinwan Road

*Email
Please enter Your valid email address.
*To

icegreen guan
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Access	Firewall	New Products	Optical Fiber Tools
Routers	Security	server	Storage
Switches	Transport Network	UC	VOIP
Wireless Charger	WLAN

Huawei AP6310SN-GN Access Point

You May Like

Product Details

Product Description

WLAN features

Network features

Specifications

Radio Specifications

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category