Quidway supplier dual system mode rack server huawei RH 1288 V2 with 1 or 2 processors

CPU

• The server supports two Intel Xeon® E5-2600 (Sandy Bridge-EP) series CPUs.

  • One or two CPUs of quad-core, six-core, or eight-core
  • Highest CPU frequency: 3.3 GHz
  • Maximum power consumption of each CPU: 135 W
  • Maximum L3 cache of each CPU: 20 MB
  NOTE:

  The performance of the 135 W CPU may deteriorate when one fan fails.

• The server supports two Intel Xeon® E5-2600 v2 (Ivy Bridge-EP) series CPUs.

  • One or two CPUs of 4/6/8/10/12 cores
  • Highest CPU frequency: 3.5 GHz
  • Maximum power consumption of each CPU: 130 W
  • Maximum L3 cache of each CPU: 30 MB
  NOTE:

  The performance of the 130 W CPU may deteriorate when one fan fails.

• Two CPUs are connected through two QuickPath buses of full bandwidth. Each link provides a unidirectional transmission rate of up to 8.0 GT/s.

Memory

• Maximum number of double data rate 3 (DDR3) DIMMs: 24

• Maximum memory capacity: 768 GB

• Capacity of a single DIMM: 4 GB, 8 GB, 16 GB, or 32 GB

• Memory speed: DDR3 800/1066/1333/1600/1866 MHz

Storage

• The server supports two types of hard disk configurations:

  • RH1288 V2-8S: supports eight 2.5-inch SAS HDDs, SATA HDDs, or SSDs at the front.

  • RH1288 V2-4L: supports four 3.5-inch SAS HDDs or SATA HDDs at the front.

• The following information lists the total storage capacity of eight 2.5-inch hard disks:

  • SAS HDD: 7.2 TB
  • SATA HDD: 8 TB
  • SSD: 4.8 TB

• The following information lists the total storage capacity of four 3.5-inch hard disks:

  • SAS HDD: 4 TB
  • SATA HDD: 16 TB

• Hard disks are hot-swappable.

• SAS HDDs, SATA HDDs, and SSDs can be installed in one chassis.

• The server supports RAID 0, 1, 10, 5, 50, 6, and 60. It supports iBBU battery protection, RAID state migration, RAID configuration memory, self-diagnosis, and web-based configuration.

• The mainboard can be configured with an Serial Attached SCSI (SAS) card or an SAS RAID controller card (with the maximum 1 GB cache) for improving hard disk storage performance and protecting user data.

• RAID controller cards do not occupy standard PCIe slots, which ensures high scalability for the system.

Chipset

Intel^® C602 chipset.

Network port

I/O port

• One onboard DVD-ROM/DVD-RW connector

• Five USB 2.0 ports: two on the front panel, two on the rear panel, and one on the mainboard

• One USB flash port on the mainboard

• One VGA port on the front panel for the RH1288 V2-8S and none for the RH1288 V2-4L; one VGA port on the rear panel for either server

• One RS232 port on the rear panel

• One RJ45 management port on the rear panel

DVD-ROM drive

DVD-ROM/DVD-RW drive, optional when the server is RH1288 V2 (8 hard disks).

Expansion slots

• A maximum of three PCIe cards are supported:

  • One standard PCIe slot of full height and full length
  • One standard PCIe slot of half height and half length
  • One non-standard PCIe slot for installing a RAID controller card

• The PCIe slots support the Huawei PCIe iNIC to improve the I/O bandwidth and throughput.

• The PCIe slots support one Huawei PCIe SSDs for search, cache, and download services to greatly improve the I/O performance.

• The PCIe expansion slots support the GPUs, such as Quadro 2000.

For details about the PCIe cards supported by the RH1288 V2, see the compatibility list.

Certification

Including CCC, CE, FCC, IC, VCCI, and C-tick

Dimensions (H x W x D)

43.6 mm (1 U) x 447 mm x 740 mm (1.72 in. x 17.60 in. x 29.92 in.)

Installation dimensions

The rack server can be installed in a common rack that complies with the IEC 297 standard:

• Width: 19 inches
• Depth: > 1000 mm (39.37 inches)

Rated power

The rated power for compatible PSUs:

• 460 W
• 750 W
• 800 W

Weight (in full configuration)

Net weight:

• Eight 2.5-inch HDDs: 19.6 kg (43.22 lb)
• Four 3.5-inch HDDs: 20 kg (44.10 lb)

Packing material weight: 5.3 kg (11.68 lb)

Rated input voltage

• AC: 100 to 240 V AC

• DC: -48 V DC to -60 V DC

Temperature

Operating temperature: 5°C to 35°C (41°F to 95°F)

Storage temperature: -40°C to +65°C (-40°F to +149°F)

The temperature change rate is smaller than 20°C (36°F)/h.

Altitude

≤ 3000 m (9842 ft). When the altitude is higher than 900 m (2952.72 ft), the operating temperature decreases by 1°C (1.8°F) per 300 m (984.24 ft).

Humidity

Operating humidity: 8% to 90% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

The humidity change rate is smaller than 20% RH/h.

Acoustic Noise

The data listed in the following is the declared A-weighted sound power levels (LWAd) and declared average bystander position A-weighted sound pressure levels (LpAm) when the server is operating in a 23°C (73.4°F) ambient environment. Noise emissions are measured in accordance with ISO 7999 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

• Idle:
  • LWAd: 6.0 Bels
  • LpAm: 43.0 dBA
• Operating:
  • LWAd: 6.7 Bels
  • LpAm: 50.1 dBA