express chinese laser cutting machine

alibaba express chinese laser cutting machine

1.Al platform design with 240mm height to ensure rotary device working smoothly.
2.48 gears improve lifting strength on basic of big contacting area.
3.Adjustable design of bold screw holder offer lower noisy and stable moving.
4.Both limited switches on top and bottom, protecting working table.

Technical Parameter

Applicable industry:
Mould industry (construction mould, aviation and navigation mould, wooden mould), advertising, 

decoration, arts and crafts, electronics, electric appliances, etc.

Applicable Materials:
Materials such as acryl, wood planks(light planks,candlenut wood),bamboo ware, double color board, paper, leather, shell, 

coconut shell, ox horn, resin animal grease,ABS board, lamp shade, etc.

QC example

 1.Laser tube test

Every laser tube and power supply will be adjusted for continual 8 hours(electrify every 7 seconds); "power test equipment" test power consumption and get real output power and laser jet distance.

Picture 1 and 2: use "power meter" get laser tube's power in tested current: make the light sensation piece in middle to aim at output entrence of laser tube, also put it 20mm from output entrence, make current to test current situation, then you can see the number on power meter display screen, when it is stable, it is real power of laser tube. Meantime, you can test the light spot effect with it.

Not qualified laser tube will be returned to our supplier!

  2.laser head, control panel and power supply adjustment

All laser head, control panel and power supply will be aging test, to test its stablity and function, so as to ensure all of them are best-to-use before into storage.

  3.Square guide rail test

  Test point: check square guide rail flatness, straightness; test size and pitch-row according to design; Put the square guide rail on marble, check whether it is curve, ensuring the error is < 0.1mm.

  4.Synchronizing wheel test

Test point: check synchronizing wheel's flexisiblity, check whether it is the same step and uniform with bearing.

  5.Laser tube holder, bearing holder, transmission band and strutting piece

  Test point: mild, internal precision and durability

  6.Test screw, plastic tube and other hardware

  Test point: refer to standard if the parts can be tested precisely; if the parts can not be tested precisly, we will compare them with standard sample, compare every hardware's standard to ensure every parts has their own precise specification.

   7.Whole machine adjustment and test

Before delivery, the machine will be adjusted and test by 3 departments, during which quality department will set parameter, adjust parts and then cut/engrave/mark sample materials.

   Gaurantee and after sale service:

Gurantee the whole machine for TWO YEARS and laser tube for 3 months, offer lifelong repair, laser tube’s average life is 4000-10000 working hours(depends on the laser power) Offer 24 - hour technical support.