hot! Widely Used Sawdust pellet machine

Specifications

Features:

Materials will be more than 600 mm in ensilage, cutting or use the crusher for crushing machine, its material grain length and content of within the prescribed scope;By feeding machine, belt conveyor) or artificial materials uniform will be sent to machine above material inside the mouth, pressure molding is finished.From raw material source to fuel use process is: material recycling - Zha cut - feeding automatically to the metal to suppress - molding - output - cooling - transport to civil, small boiler, biomass power plant.

Introduction:

Straw briquette machine molding machine | | straw fuel straw coal machine performance is introduced
A high degree of automation, high output, low price, less consumption, simple operation, convenient move.If no power equipment can be substituted for diesel engine.
1. The DS - 1000 type straw briquette machine, 1 ton per hour, 15 kw power.
2. The DS - 2000 type straw fuel molding machine, 2 tons/hour, 22 kw power.
3. DS - 3000 type straw coal forming machine, 3 tons/hour, 30 kw power.
Material adaptable: suitable for all kinds of biomass forming, straw from powder to 60 mm length between, between the moisture content of 5-30%, can be processed to shape.
Electric heating function: automatic electrical heating device can adjust the dry humidity of material, solve the problem of plugging material, not forming.
Roller automatic adjustment function: by using the principle of bi-directional thrust bearing rotation automatically adjust the pressure Angle, make the material not crowded, not boring machine, keep stable discharging molding.
Operation is simple and easy to use: a high degree of automation, less labor, only 3 people, using artificial feeding or automatic feeding conveyor can be.
Mill long service life: developed the mould adopts the special steel and special wear-resistant materials, three years without replacement.
Performance ratio and high cost performance: on the basis of the same kind of equipment, increase the technological content of the machine and the function.Full consideration on the price for the bearing capacity of the masses of users, especially on the processing cost of farmers friends.

"Straw briquette" the related technical parameters
After molding of straw charcoal piece: what it was worth only 1/30 of the original straw, straw is the same weight of 10-15, its density is 0.9 1.4 g/cm3, heat value can reach 3500-5500 kcal, ash is approximately 5%, sulfur content in the following, five over one thousand is the high volatility of the solid fuel.Burning rate above 95%, and after burning ash can be used as potash returning directly to improve soil quality.
In the case of maize straw, corn straw stalk fuel combustion under the form a complete set of biomass burning furnace combustion, the combustion rate is 1.3 1.5 times that of coal-fired boiler, so the heat of a ton of corn straw briquette fuel utilization rate the same as the heat of a ton of coal.