Smart door outdoor indoor proximity rfid wg26 em card reader HSY-R166

 Smart door outdoor indoor proximity rfid wg26 em card reader HSY-R166

Advantage:

1.16 years experience professional in RFID products

2. OEM/ODM orders are welcome;

3. Professional techniques supports;

4. Best quality,Best price,Best Service.

Introduction:

RFID card reader is a standard Wiegand26 bit output format and an off-contact high performance reader. Its main use is as a supplementary reading device for the controller which has the wiegand interface. It characters with exquisite appearance, convenient installation and stable characteristics. 

 RFID wg26 em card reader Specification:

 RFID wg26 em card reader Sample shows:

Related Products can be take from us together :

Installation:

Using “+”type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Notice!!!

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. The wire connects reader to controller, advise use 8 cores stranded twisted pair cable(among them, three strands are spare, if no need reader show illegal card s by sound and light, LED wire can not be used, data wire Data1 Data0 are twisted pair would be better, we suggest sectional area are 0.22 square millimeter at least. The length should not exceed 100meters.

Shipping :

1.  Fast way: By express courer, such as: DHL, Fedex, UPS, TNT, EMS... take about 3-7 days.
2.  Cheap way (small package): By China post, should take about 15-70 days.
3.  Cheap way: By Air or by Sea shipment.