800C~1200c MCH Ceramic Heating Element for Pellet Stove

Xiamen Green Way  is your best choice for high level quality and best price  800C~1200C MCH Ceramic

Heating Element/120V/240V pelleT systerm igniters with the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.

Characteristic

1.High temperature-resistance ceramic pellet igniter which can reach a permanent working tem-

 perature above 750°C

2.Energy saving, super fast heating-up

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

4.Electrically oxidation and corrosion-resistant

5.High load-bearing capacity(thermal shock resistance, cycles)

5.Customization the igniters according to customers’ specific requirement.

Application

One special application area for Green Way’s high temperature alumina ceramic heaters are

in heating systems that used solid fuels such as wood pellets as energy source. The challenge

here is to ignite the biomass in a very short time while retaining very low emission values. This

can be perfectly achieved by Green Way’s hot surface ceramic pellet igniter.

Alumina ceramic heaters  for pellet boilers need only approx. 1/10 of the energy of that

needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt.

Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 s

econds is extremely short. This also means minimal emissions!

Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible. 

Mass customization is available.