230V Wholesale High Quantity Ceramic Ignitor for Wood Pellet Biomass Boiler

Specifications

Xiamen Greenway is a professional ceramic ignitor manufacturer for Biomass Boiler with the

advantages of long service time, fast heating rate, energy-efficient and eco-friendly.

Our ceramic heating elements consist of AL2O3 insulation ceramics with an integrated platinum

conductor, and reach to a permanent operating temperature between 800°C and 1100°C

Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed

by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending

on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is

extremely short. This also means minimal emissions!

Application 

One special application area for the high-temperature heaters is in heating systems that use

solid fuels such as wood pellets as the energy source. The challenge here is to ignite the biomass

in a very short time while retaining very low emission values. This can only be achieved with a

sufficiently high ignition temperature.1000°C, heats up the supply air in the shortest possible time

to an extremely high temperature.

Our hot surface igniters are perfectly suited for this purpose. This special geometry of the c

ylindrical ceramic heaters, in combination with an extremely high surface temperature.

 Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.

 Mass customization is available.

~~~Greenway's Patents ~~~