Wholesale China Supply Good Quality Wood Pellet ignitor for Industrial Used Burner

Specifications

HIGHLY DURABLE AND ENERGY-EFFICIENT XIAMEN GREEN WAY’S IGNITER

                                                                                          ---ceramic hot surface igniters for the sake of environment.

Xiamen Green Way  is your best choice for high level quality and best price wood pellet  ignitor for industial used burner with the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.

Characteristic

1.High temperature-resistance ceramic heating element which can reach a permanent working temperature

   above 750°C

2.Energy saving, super fast heating-up

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

4.Electrically oxidation and corrosion-resistant

5.High load-bearing capacity(thermal shock resistance, cycles)

5.Customization the igniters according to customers’ specific requirement.

Application

One special application area for Green Way’s high temperature ceramic igniters is in heating systems that

use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very

short time while retaining very low emission values. This can be perfectly achieved by Green Way’s hot surface

ceramic igniters.

Ceramic hot surface wood pellet ignitors for industrial used burner need only approx. 1/10 of the energy of

that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200Watt. Depending

on the positioningof the ignition element in the boiler, the ignition time of approx. 60 seconds is

extremely short. This also means minimal emissions!

Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible. 

Mass customization is available.