ETCR6800D AC/DC Leakage Current Clamp Meter

Function

Measure AC/DC current, peak hold, online monitor

Size of clamp

Φ68mm

Range

0.0A~2000A DC/AC

Accuracy

±2%rdg±3dgt

Resolution

0.1A

Dimension

224mm×115mm×43mm

Data interface

USB

Weight

515g(with battery)

Power Supply

Zn-Mn dry battery 6F22 9V, lasting for100hours

Test Mode

Clip-on CT, integral mode

Display Mode

Four digits LCD display

LCD Dimension

35mm×21.5mm; display domain: 32mm×15mm

Frequency

AC 45Hz~400Hz 

Sampling Rate

2 times/s

Polarity Indication

DC current auto identified and display“—”

Test Position

Tested wire in the jaw center; Error will increase to 1.5%rdg max if deviate the center

Range Shift

Automatically

Line Voltage

AC600V

Software

with the software the data can upload to computer

Data Memory

99units, FULLblinks when the memory is full

Peak Hold

Push HOLD without release, the meter will show the peak value during the pushing period

Reading Hold

DH indicating the reading is hold

Out of Range

OL indicating the current is out of range

Auto Power-off

5 Minutes after power on, it will power off automatically to lower the power consumption

Battery Voltage

Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed

Consumption

10mW

Temperature and Humidity

-10°C~50°C; Below 80%rh

Max error refer to environment

-10°C~0°C,40°C~50°C,Error will increase max to 1%rdg

Temperature and Humidity for storage

-10°C~60°C,below 70%rh

Insulating Strength

AC2kV/rms. (between the alloy of the clamp and the housing)

Applicable safety rules

IEC1010-1, IEC1010-2-032, Pollution level 2, CAT III(600V)

Accessories

Meter: 1pc; USB communication line: 1pc; software: 1pc; battery (6F22 9V):1pc.