综合三区后入内射国产馆,中文在线中文资源,中文字幕人妻无码系列第三区,亚洲中文成人中文字幕,最新的国产成人精品2021

We are seeking a 640kVA diesel generator set with the following specifications:

Main parameters:
- Prime power: 570kVA/456kW
- Standby power: 640kVA/512kW
- V-12 turbocharged engine with ≤26.6L displacement
- Fuel consumption: ≤124L/h (100% load), ≤95L/h (75% load), ≤64L/h (50% load)
- System capacities: 59L oil, 120L coolant, 1120L fuel tank

Alternator requirements:
- 400/230V 50Hz 3-phase brushless design
- H-class insulation and IP23 protection
- AVR voltage regulation with ±1% accuracy
- 110% overload capacity for 1 hour

Control panel must include:
- Manual/automatic operation modes
- ATS and automatic load sharing
- Under-frequency protection
- Emergency stop function

Essential configuration:
- Soundproof canopy
- Automatic battery charger
- Fuel tank heater
- Lockable fuel filler cap
- Complete cable set

Please provide technical compliance confirmation with your quotation.

We require a pump pressure test system capable of handling maximum pressure of 725psi (50 bars) with 1/2" NPT pressure hose connection. The unit should have 3.6 gallons tank capacity and operate within maximum temperature of 50°C (120°F). Required specifications include piston volume of 2.3 cubic inches, dimensions 28"x8.5"x9.5", and weight under 14lbs. Please provide RIGID Model 50557 (Catalogue 1450). Looking to purchase 2 units for leak detection in heating, potable water, fire sprinkler, compressed air, small bore pipe lines, and oil systems.

I need to purchase electric heaters meeting the following specifications:
- Type: EH1201 A/B
- Product Serial Number: 17F214
- Volume: 2.75 M3
- Design Pressure: 0.06 MPA
- Design Temperature: 300°C
- Net Weight: 2890 KG
- Standard: HK708-1999
- Drawing: 16-10-03-A-80-008-001-D
- Technical Code: 3061400002

Please confirm availability and provide commercial offer.

I am seeking the following instruments for train instrumentation applications:
1. Automatic Kinematic Viscometer
2. Water Oil Bath Heater
3. Oil Pour Point Instrument (HSD model)
4. Water Particle Test Machine
5. Transmission Oil

Please confirm your capability to supply these specific instruments. Indicate whether they meet train industry standards and provide technical specifications. State your production lead time and minimum order quantities.

I need to purchase 1 unit of Heater WN-B1000W and 1 unit of Temperature Controller WN-B15.  

Please provide your best offer for shipping to Australia.

Require 2 units of 15KW gear motors for escalator drive systems. Specifications must include:
 
Motor Specifications:
- 400/690V 60Hz
- 1200 RPM
- IP65 protection
- F class insulation
- 27.5:1 gear ratio
- 190A starting current
- S6-60 duty cycle

Gear Specifications:
- TKN-160 model
- 20-tooth sprocket
- 95mm drive chain compatibility
- VG460 synthetic oil lubrication
- 13.5L oil capacity

Dual motor configuration required with right/left side sprocket orientation. Must comply with ambient temperature rating up to 40°C.

We are a manufacturer of medical devices, and we use high-voltage capacitors in our shockwave generator product. Currently, we are using Part Number: SV17KC273KAR (Kyocera AVX), Type: Radial - leaded MLCC, Capacitance: 0.027 μF (27,000 pF), Rated Voltage: 5 kV DC, Dielectric: X7R, Application: High - voltage, repetitive pulse discharge in a medical device, Quantity per unit: 6 pcs. We are looking for a customized capacitor with the same or improved electrical characteristics as above. We are open to either High - voltage MLCC type or Pulse - rated film or oil - filled capacitor. Required parameters: Capacitance: 0.027 μF ±10% (or closest standard value), Rated Voltage: ≥5 kV DC (higher preferred), High dv/dt capability and suitable for repetitive pulse discharge, Low ESR and ESL, High reliability for medical application, Operating temperature: –25°C to 85°C (or better). Please provide recommended existing models (if available) matching the above specs. and options for custom

We have inquiry for INDICATOR, TEMPERATURE, THERMOSTAT, LP SEAL AIR HEATER, VOLTAGE RATING : 220 VAC, ITEM NUMBER : BT1 SERIES, BRAND : BOTA

We are looking for a Hydraulic oil flowmeter which has technical specifications below, TECHNICAL SPECIFICATIONS Flow range: 3 – 400 L/min, Pressure range: 0 – 420 bar, Fluid temperature: 0 – 120?°C, Flow accuracy: ±1%, Temperature accuracy: ±1% °C, Inlet/outlet thread size: 1\" BSPP. The flow rate must be adjustable during measurement (standard valve with safety relief valve). The body shall be aluminum. It shall include at least one rupture  disc or if it does not have can you entegrate it? If you can suggest a product of yours and share price information ? would be grateful.

Ask about CE - Certification of Mold Temperature Controller (Water Type), Model: AMTC - 9 - W, Heater Power: 9KW; Pump Power: 0.75KW; Max. Flow Rate: 60L/min, Max. Pressure: 4.5Bar, Max. Temperature: 120℃, Voltage: 3Phases

Inquiry About can set the heating temperature between 20 - 180 portable COD REACTOR and test tube heater CX - 200

Looking for Chinese manufacturers of Oil-resistant gasket sheet, recommended for high temperatures and pressures. Designed for use in subsurface connections. Recommended for water, steam, fuels, oils, salt solutions, natural gas, propane-butane.

We are planning to procure a Thermal Oil Boiler for our project and request your best quotation based on the attached datasheet and the following key specifications: Type: Thermal Oil Boiler, Horizontal; Service: Intermittent; Capacity: 1,200 Mcal/hr (5,040 MJ/hr); Fuel: Heavy Fuel Oil (HFO); Fuel Firing System: Pressure Jet, Monobloc burner (SAACKE brand or equivalent); Control System: Programmable Logic Control (PLC); Boiler Pumps: 2 units (1 Duty, 1 Standby) – IE3 motor standard; Oil Tank: Elevated, manually filled atmospheric day tank with capacity sufficient for at least 6 hours of boiler operation; Site Conditions: Altitude 12 m ASL; Max. Ambient Temperature 31.6 °C; Humidity up to 83% (tropical wet)

Required Specifications: ? Type: Tubular cartridge heater, threaded 3/8” ? Length: 150mm ? Voltage: 24VDC ? Power: 300W ? Working medium: Oil in a pressurized tank (up to 15 bar) ? Application: To maintain the oil temperature above 0°C during cold conditions ? Cable: Suitable for automotive use, oil-resistant, and rated for the working temperature. Please request: ? Technical datasheet with dimensions and cable details ? Price quotation for sample quantity and 50/100 pcs batch. We forecast 1000 pcs/year ? Lead time ? Available certifications (CE, RoHS, etc.) ? Shipping terms (FOB / CIF)

Receive offer for equivalent of the following pumps: 1. Screw pump (IMO PUMP) ACG 70 - 2N3F 85 - 65 615A - 1986, 2 pcs, fluid - fuel oil, type - screw, vertical pump, capacity - 25.9 m3/h, pressure - 0.2 Mpa, el. motor HXUR 262 A2 V1: 3x380 V, 50 Hz, Rev. 1440 rpm, Output - P = 5.5 kw, IP44; 2. Screw pump (IMO PUMP) ACF 100 - 3N4F, 2 pcs, fluid - lub oil, type: triple screw, Max. working pressure - 10 kg/cm2 at 40 cSt at max. temperature of the lub oil 90 C, el. motor HXUR 405 A V1: 3x380 V, 50 Hz, Rev. 1450 rpm, Output - P = 28 kw, IP44

fuison furnace YX42. Equipped with 12 pcs SiC (Silicon carbide) heaters. Thermoregulator for temperature adjustment. Capable of reaching temperatures up to 1400°C. Control panel with digital display for temperature regulation. Equipped with a switch for starting and stopping the furnace. Top lid opens upward; includes air inlet ports. One - time melting capacity of more than 42 crucibles. High working power capacity. Power supply: 380V, 40KW (3 - phase), Output voltage: 90V–150V. Working dimensions: External: 730W × 700D × 430H (mm), Internal: 680W × 670D × 370H (mm). External furnace dimensions: 1360W × 1100D × 1970H (mm). High - temperature insulation is deeply layered. The upper part is equipped with gas exhaust, chimney, and spark protection cover. Crucible insertion size: approx. ?90mm / ?160mm.

Looking for oil-resistant rubber hose, specifically suction and discharge type, suitable for use in marine environments for the transfer of petroleum products (diesel). Specifications: Type: Suction and discharge hose (reinforced for negative and positive pressure), Inner Diameter: 150 mm (6 inches), Working Pressure: Minimum 20 bar, Length Required: Total 350 meters (can be delivered in standard segments), Temperature Range: From -40?°C to 40?°C, Outer Layer: Abrasion-, saltwater-, and UV-resistant, Application: Marine (floating or fixed) hose for petroleum handling

We need a large quantity of wicks for oil heaters. Please let me know your prices.

We need a large quantity of wicks for oil heaters. Please let me know your prices.

Inquiry About mold temperature oil heater

iam looking for manual or hydraulics pipeline induction heater for 2.5 m pipe and working temperature of 150 c

Im asking for a quotation for and oil and temperature sensor for a cummins engine generator Cummins Engine Model: NTA-855-G4 Serial Number: 25417203 Rating: 400 KVA RPM: 1500, 50HZ
Im requesting for a quotation

Looking for thermistor temperature oil baths and testing equipments

is looking for possibility to purchase  RBD coconut oil with following quality characteristics: Melting temperature – 18-22 FFA – 0,10 % max Moisture – 0,10 % max Color (5,25 Lovibond scale ) – 1,5 R max iodine number AOCS – 11 max Peroxide number - 2 meq/kg max Packing : carton boxes Volume: 21,870 mt in 40 ft container