I want to buy Bo m?ch t?n s? ?i?u t?c ???c l?p ??t trong t? ?i?u t?c có nh?n th?ng tin nh? hình TYPE: GYWT - 1000 - 16 OPRATING VOLTAGE: DC220 . 24V RATE OIL PRESSURE 16Mpa EX - FACTORY NO 2017 - 7 RATED FREQUENCY 50Hz WORKING  VOLTAGE AC 220 . 380 V PRESSURE TANK VOLUME 0.04m3 EX - FACTORY DATE 2017 3 produce

We are currently sourcing a stainless steel stirred batch reactor for a pilot - scale application. Interested in jacketed, stirred batch reactors with requirements: Tank capacity: 100?L, 250?L, 300?L, or 500?L; Pressure rating: Minimum of 50 bar (5 MPa); Temperature rating: Up to 150–200?°C; Material: SS316 or higher; Batch operation; Thermal jacket for heating and cooling; Stirrer motor with variable speed control; Ports for instrumentation. Need quotation for reactors of the above sizes, datasheet or brochure with full technical specifications, maximum pressure and temperature ratings, certifications, estimated build time and shipping lead time to the UK, Nigeria or Indonesia, possibility of factory visit or video demonstration before purchase, warranty period and after - sales service.

We are planning to procure a Thermal Oil Boiler for our project and request your best quotation based on the attached datasheet and the following key specifications: Type: Thermal Oil Boiler, Horizontal; Service: Intermittent; Capacity: 1,200 Mcal/hr (5,040 MJ/hr); Fuel: Heavy Fuel Oil (HFO); Fuel Firing System: Pressure Jet, Monobloc burner (SAACKE brand or equivalent); Control System: Programmable Logic Control (PLC); Boiler Pumps: 2 units (1 Duty, 1 Standby) – IE3 motor standard; Oil Tank: Elevated, manually filled atmospheric day tank with capacity sufficient for at least 6 hours of boiler operation; Site Conditions: Altitude 12 m ASL; Max. Ambient Temperature 31.6 °C; Humidity up to 83% (tropical wet)

We are currently sourcing a 6.4V 9Ah LiFePO? lithium battery to be used in solar lighting applications. We would like to know more about the following:Full technical datasheet and product specifications,Built-in Battery Management System (BMS) features (overcharge, overdischarge, short circuit, temperature protection),Recommended charge/discharge current,Lifespan (number of cycles at 80% DOD),150 Qty Availability and lead time,Shipping options to Saudi Arabia. We are looking for a direct replacement of a battery with the following specs:Nominal Voltage: 6.4V, Rated Capacity: 9Ah, Charge Voltage: 7.2V, Cut-off Voltage: 5V, and Operating Temperature: -40°F to 140°F. Please let us know if your product meets these criteria and provide any additional documents or certifications (e.g., UN38.3, MSDS).

Service: HP Steam Temperature, Instrument Type: Temperature Gauge, Qty: 1, Description: - Scale Range: 0 to 700°C - Insertion Length: 490 mm - Nominal Diameter: 150 mm - Type of Mounting: Lower back with adjustable stem - Stem Material: 316SS - Process Connection: 1/2" - Connection Material: 304SS - Stem Outer Diameter: 6.4 mm - Extension Nipple: 200 mm (1/2” NPT(F) × 1/2” NPT(M), 316SS), Model: T290, Manufacturer: WISE CONTROL INC. Ask if the product is available.

Hello, please send us your best offer for a HOSPITAL WASTE INCINERATOR conforming to these technical specifications Features Complete combustion at temperatures above 1000 °C Safe destruction of all pathogens Incineration rate of 5 to 20 kg of waste per hour, low fuel consumption Flame retardant lining for temperatures up to 1250 °C Modular design for easy on-site transport and assembly Incinerates up to 8 cubic feet (.22 cubic meters) per load, 330lbs (150kg) per day Ready to use upon delivery Minimal training Easy to operate with state-of-the-art controls Automatic, pre-set cycle control for startup and shutdown Dual chamber combustion and high exhaust temperatures in excess of 1000°C Thermostatic temperature control for efficient fuel consumption On board 40-gallon fuel tank Manufactured in ISO 9001:2008 certified facility Temperature measurement while cycling. Capacity: 10-15 of waste per hour Weight: 907Kg (approximately 2000lbs) External Dimensions: WxDxH= 730x 900x1300mm Size main chamber: WxDxH=430x330x700mm Chimney Height: approx. 6 m above incinerator Temperature resistance of lining: 1250°C Electrical: 230v 50Hz Fuel: Diesel 10-20 KW, 2-3l/h After sales service: Yes, installation and start-up. Present a catalog: Yes, Request Warranty: 3 years Transport: Transportable by air on standard EURO pallet As well as its transport costs from your home to the port of Lomé in Togo

fuison furnace YX42. Equipped with 12 pcs SiC (Silicon carbide) heaters. Thermoregulator for temperature adjustment. Capable of reaching temperatures up to 1400°C. Control panel with digital display for temperature regulation. Equipped with a switch for starting and stopping the furnace. Top lid opens upward; includes air inlet ports. One - time melting capacity of more than 42 crucibles. High working power capacity. Power supply: 380V, 40KW (3 - phase), Output voltage: 90V–150V. Working dimensions: External: 730W × 700D × 430H (mm), Internal: 680W × 670D × 370H (mm). External furnace dimensions: 1360W × 1100D × 1970H (mm). High - temperature insulation is deeply layered. The upper part is equipped with gas exhaust, chimney, and spark protection cover. Crucible insertion size: approx. ?90mm / ?160mm.

Inquiry About RKC Temperature Controller FB900 VM-4*4N5N/A1WD21

Inquiry About swg 1000 Series Multi-slope Intelligent Temperature Controller, please attach datasheet.

Need SMD Xtal Oscillator TCXO 3225 freq 25 Mhz/25.000 or freq 27 Mhz/27.000 , 4 pin , dimensions 32x25. TCXO Xtal Oscillator Specification: Temperature Stability: ?±0.5 ppm~?±2.0 ppm. Operating Temperature Range: -30a??~85a??. Supply Voltage: 1.8V~3.3V. Voltage Control Function Available. Output Type -Clipped Sinewave

Looking for domestic gas burner electronic control manufacturers. Need to know who can manufacture electronic circuits connected to the mains, drive a gas valve and generate sparks. 120Vac gas ignition control. Electric pulse oven igniter.

We are contacting regarding the procurement of equipment for thermal post - treatment of recovered carbon black (rCB) produced from pyrolysis of end - of - life tires. We are operating a fine grinding and air classification system and looking to integrate a high - temperature thermal treatment stage. Request a proposal (quotation & technical specifications) for required equipment (continuous rotary kiln or tube furnace for rCB thermal treatment, specific working conditions, capacity, temperature range, etc.) and deliverables (main equipment, control cabinet, feeding and discharging systems, etc.). Appreciate response with available models, technical datasheets, and pricing.

Looking for a refrigerator that can store around 400 ea (0.5 kg solder paste), with a temperature control range of 2 - 9 deg. C, can control temperature and access data through the network, and can control and manage first - in, first out (FIFO). Ask for quotation and details.

Look for the spare part (Motorize Globe Valve built in Temp.Controller 6" PN16 SV built in Temperature Controller & Sensor, Supply: 220VAC) of OEM product at the machine, please share sales contact number or Wechat

We have a tender enquiry for MPI - A capillary electrophoresis - electrochemiluminescence analyzer. Key specifications include capillary electrophoresis system details (length, diameter, material, etc.), electrochemiluminescence detection system details (sensitivity, wavelength range, etc.), sample introduction options, system control and integration features, and temperature control features. Performance features include high - resolution and fast separation. Please share the model and the best lowest price for this tender.

ALUMINIUM DOSING PUMP. Motor driven with the following specifications. Key Specifications: 1. Nominal Flow Rate: 4000l/h per head; 2. Number of Dosing Heads: 2; 3. Approvals: CE, EAC, CNROHSEX; 4. Non - Return Valves: Standard type for both inlet and outlet. Materials and Installation: 1. Materials: Suitable for handling aluminium sulphate solution; 2. Max Operating Pressure: 10 bar (at 50 Hz); 3. Max Permissible Inlet Pressure: 0.8 bar. Liquid and Electrical Details: 1. Pumped Liquid: Aluminium sulphate solution; 2. Temperature: 20?°C; 3. Density: 998.2 kg/m?3; 4. Mains Frequency: 50 Hz; 5. Rated Voltage: 3x230/400V; 6. Enclosure Class: IP55; 7. Viscosity: 50mPas. Controls: 1. Control Panel

Specification: 1.Overall size ???380x320x430MM 2.Furnace tube size ?|50MMx ID 44MMX L600MM 3.Supply voltage 220V50HZ 4.Interiorinput power 1.2 KW 5.Temperature control range Room 6.Temperature: -1,200a?? 7.Working temperature a?¤1100a?? 8.Temperature control accuracy ???1000 ?±0.1a?? ??? a?￥1000?±1a?? 9.Thermostatic fluctuation ?± 1a?? (the test point is 1000a??) 10.temperature equalization ?± 3a?? (test point of 1000a??) Include: Vaccum sealing flange with a mechanical gauge thermal block

Inquiry About YK-301/SF-474 incubator temperature control humidity/temperature humidity 

Inquiry about temperature control unit

Inquiry about Temperature Controller

Hi, We need Thermostatic Temperature Control Valve Element qty 100 Nos

How many price of this product ?

We are looking for high temperature furnace for our testing machines. Vertical split type furnace Maximum temperature - 1200Deg. Celsius Furnace useful height - 100mm Furnace with 3 zones Control range -  /-2 Deg. Celsius Usage of K type Kanthal element Furnace having slot at front to pass extensometer arms.

i am interested to purchase incubator parts Thermostat Humidity Control  Egg Turners  Temperature Sensor Display/Control Panel etc