Require customized linear actuators with below specifications:  
- Stroke: 84mm  
- Voltage: 24VDC  
- No load speed: 15mm/s  
- Load capacity: 1000N  
- Installation dimensions: 191mm(MIN) to 275mm(MAX)  
- 60W motor with 5mm synchronization error  
- DC input from side  
 
Need quantity options for 100/500/1000 units. Please provide pricing details and customization capabilities.

Looking for AC synchronous motor specifically designed for pedestal fan oscillation. Required specifications: 3 RPM, 4W power rating, 230VAC/50Hz operation with continuous working capability up to 265VAC. Seeking reliable low-cost solution for BLDC motor manufacturing application.

I require the Siemens 1FK7032-5AK71-1LG3-Z V42 SIMOTICS S Synchronous servo motor for industrial automation applications. Please confirm your capability to supply this specific model and provide pricing details. Ensure the motor meets standard specifications and has genuine Siemens certification.

We require a synchronous gearless permanent magnet traction machine model GTN2 with the following specifications:  
- Nominal power: 43.6 kW  
- Load capacity: 1500 kg  

Please provide technical documentation and compatibility details. We can share the motor nameplate photo via email for accurate reference.  

I require an arc spray welding machine for applying protective coatings on industrial motor components and pump shafts. The equipment must be capable of handling various stainless steel grades (EN 8, EN 16, EN 32) with appropriate material compatibility. Need reliable performance for surface restoration and wear resistance applications in mechanical repair work.

We require 8 units of multistage submersible borehole pumps for handling aggressive liquids (acidic/alkaline media with low sand content). Technical specifications:
- Flow rate: 17 m3/h
- Head: 120-150 m
- Motor power: 9.3 kW (3×400 V, 50 Hz)
- IP68 protection class
- Must operate in liquids containing up to 40 g/l sulfuric acid and 100 g/m3 sand
No customization required. Ready to place order immediately.

I need to purchase 1 set of electric motor and jockey fire pump for fire protection system. My budget is approximately $150,000. Please provide quotation with technical specifications and delivery details.

I'm looking for customized nebulizer motor pumps with specific requirements. Please provide product details and customization options. Quality and reasonable pricing are key considerations for my order.

I need 12V DC motors with 6 liters per minute discharge capacity for battery-powered sprayer pumps. The motor should be compatible with DC battery systems. Please confirm if your product meets these specifications and can be integrated with sprayer pump mechanisms.

Item Specification Type Submersible Vertical Centrifugal Pump (Explosion Proof) Size / Quantity 4" – 2 Nos, 6" – 1 No. Medium Sea Water (TDS > 35,000 ppm – High Salinity) Usage Pump Out from intake chamber. 2. Pump Construction Component Material Notes Casing Duplex Stainless Steel (ASTM A890 1A) High corrosion resistance in saline conditions Impeller Ni - Al Bronze or Duplex SS Closed/Open type optional Shaft SS 316 / Duplex SS (with sleeve) Anti - corrosive, long life Seal Mechanical Seal (SiC/SiC or SiC/Carbon) Double mechanical seal optional Fasteners SS 316 or A4 Grade Marine - grade, anti - corrosive Coating Marine - grade epoxy (optional) For added protection in submerged environment. 3. Explosion - Proof Motor Specification Parameter Specification Type Submersible Explosion - Proof Squirrel Cage Induction Motor Power 3.0 kW – 75 kW (as per duty) Voltage 415V or 690V, 3 - Phase, 50Hz Protection IP68, Flameproof / Explosion - Proof Certified

We need centrifugal pump motor

We are currently sourcing Sicme Motori electric motors for our industrial automation project in THE UAE. We are particularly interested in the following series/models: - PM synchronous motors - ASR synchronous reluctance motors - Brushless servo motors, if available. Could you please provide: 1. Product catalog and datasheets 2. Quotation per unit, lead time, EXW Shanghai/Wuhan etc. 3. Shipping options (EXW, FOB, CIF) to JEBELALI, UAE 4. Warranty conditions and payment terms.

Order a new flex pipe top hose which goes from the top of the pump to the sand filter along with the connection at the top of the pump. Need 2 new jubilee clips and the silicon glue. Pump details: TYPE: 72543 single phaze 1 H.P. induction motor 240 volt 1,000 watt.

Quote the motor for three phase pump type AYB25TH 125W

We need two options, option 1 is Asynchronous Motors , Option 2 is Permanent Magnet Synchronous motors. 1. ALTERNATOR Model: ECP34 2S4C 50Hz 415V 100KVA. Suggested Motor Specifications: Type: Asynchronous Motors. Rated Power: size to meet the requirement for safe operation of alternators at all loading conditions. Input Voltage: 400 V. Design Base Frequency: 100 Hz. No of poles: 8. Rated Speed: 1500 r/min. Rated Torque: suitable to drive the Alternator at all loading conditions. Insulation Class: H. Protection Class: IP55. Outside temp :50 degree celcuis. Motor Encoder : Yes. Suitable for VFD Control: Yes, vector control with encoder input. 2. ALTERNATOR Model: HCO38 2L26 A 400Hz 180KVA. Suggested Motor Specifications: Type: Asynchronous Motors. Rated Power: size to meet the requirement for safe operation of alternators at all loading conditions. Input Voltage: 400 V. Design Base Frequency: 92.3Hz

We are planning to procure a Thermal Oil Boiler for our project and request your best quotation based on the attached datasheet and the following key specifications: Type: Thermal Oil Boiler, Horizontal; Service: Intermittent; Capacity: 1,200 Mcal/hr (5,040 MJ/hr); Fuel: Heavy Fuel Oil (HFO); Fuel Firing System: Pressure Jet, Monobloc burner (SAACKE brand or equivalent); Control System: Programmable Logic Control (PLC); Boiler Pumps: 2 units (1 Duty, 1 Standby) – IE3 motor standard; Oil Tank: Elevated, manually filled atmospheric day tank with capacity sufficient for at least 6 hours of boiler operation; Site Conditions: Altitude 12 m ASL; Max. Ambient Temperature 31.6 °C; Humidity up to 83% (tropical wet)

Looking for a high - performance 12V DC diaphragm pump with 40–50 liters per minute (10–13 GPM), pressure of 6–8 bar (90–115 PSI), chemical - resistant internals (SH compatible), preferably with a brushless motor and suitable for softwash rinsing use. Ask if there is anything similar to the “Super Pump” from Southeast Softwash (USA). Request full technical specs, flow vs pressure chart, price for 1–5 units, lead time to Sweden, and CE certification info (if available).

Receive offer for equivalent of the following pumps: 1. Screw pump (IMO PUMP) ACG 70 - 2N3F 85 - 65 615A - 1986, 2 pcs, fluid - fuel oil, type - screw, vertical pump, capacity - 25.9 m3/h, pressure - 0.2 Mpa, el. motor HXUR 262 A2 V1: 3x380 V, 50 Hz, Rev. 1440 rpm, Output - P = 5.5 kw, IP44; 2. Screw pump (IMO PUMP) ACF 100 - 3N4F, 2 pcs, fluid - lub oil, type: triple screw, Max. working pressure - 10 kg/cm2 at 40 cSt at max. temperature of the lub oil 90 C, el. motor HXUR 405 A V1: 3x380 V, 50 Hz, Rev. 1450 rpm, Output - P = 28 kw, IP44

I looking for a heat pump fan motor, part number 581101700, model CR4F826N2, IKD09500906

Need to procure four horizontal - type screw pumps. Provide quotation and availability details based on the following technical specifications: Quantity: 04 Units, Configuration: Horizontal Type, Maximum Working Pressure: 600 PSI, Shaft Speed: 600 a?? 1750 RPM, Flow Rate: 0 a?? 7 Lpm, Operating Fluid: Water, Fluid Temperature: 15 a?? 65 ?°C, Seal Material: EPDM, End Connections: ??" Sch. 40s Pipe, Flanged/Threaded, Electric Motor: 50 Hz, 3 Phase. Include unit price and total cost, delivery lead time, warranty details, shipping terms and conditions, technical datasheet (if available) in the quotation.

ALUMINIUM DOSING PUMP. Motor driven with the following specifications. Key Specifications: 1. Nominal Flow Rate: 4000l/h per head; 2. Number of Dosing Heads: 2; 3. Approvals: CE, EAC, CNROHSEX; 4. Non - Return Valves: Standard type for both inlet and outlet. Materials and Installation: 1. Materials: Suitable for handling aluminium sulphate solution; 2. Max Operating Pressure: 10 bar (at 50 Hz); 3. Max Permissible Inlet Pressure: 0.8 bar. Liquid and Electrical Details: 1. Pumped Liquid: Aluminium sulphate solution; 2. Temperature: 20?°C; 3. Density: 998.2 kg/m?3; 4. Mains Frequency: 50 Hz; 5. Rated Voltage: 3x230/400V; 6. Enclosure Class: IP55; 7. Viscosity: 50mPas. Controls: 1. Control Panel

Permanent Magnet Synchronous Motor

Inquiry about fire fight motor pump

Fully Automatic Dewatering Machine For the Cow dung and I have Gobar gas Slurry in Tank, I Want to Purchase Fully Automatic Dewatering Machine 5 Hp With Slurry Pump 5 Hp and Cutter Pump 5 Hp Capacity 2.0 To 2.5 ton cow dung dewatering I want to proceed per hour. After Dewatering : 1. The Seperated Water direct Use in Agriculture drip Irrigation in Crop.2.  and also After Dewatering Seperated Solid Part Moisture Contain is minimum to Very Lowest Percentage. 3.  Pressing Screw made From SS (Stainless Steel) for Long Service. 4.  Seperate Mesh Made From SS (Stainless Steel) Forlong Service. 5.  Gear Box Excellent Quality. 6.  Electric Motor Copper Winding Like Crompton. Send me Quotation Rate Price in Indian Rupees 1. Complete Machine Price With Specifications. 2. And Also Send me Quotation Rate Price for Individual Pressing SS Screw. 3. And Also SS Mesh Price 4. And Also Send me Individual Price and Specifications For Major Components, Essential Parts, Key Parts, Main Elements.