We are interested by beach volley and beach soccer equipment. 

Hi I need Custom MMA shorts

We are interested in sourcing a soccer ball with the following specifications: ? Outer Cover Material: High-quality polyurethane (PU) or a blend of polyurethane and PVC to ensure wear resistance and a good ball touch. ? Panel Quantity and Type: 32 hand-stitched or thermally bonded panels to provide stable flight and increased durability. ? Inner Bladder: Latex or butyl with high air retention to reduce inflation frequency and enhance game response. ? Weight and Circumference: Compliance with FIFA standards: weight between 410-450 grams and circumference of 68-70 cm. ? Recommended Inflation Pressure: Between 0.6 and 1.1 bar to ensure controlled bounce and better playability. 

Inquiry About IP68 small and short cable to board waterproof connector

i need information on soccer ball

Need small tea cup and Short wine glasses in 30 ml and 60 ml for Indian market

 We are looking for sterile/non sterile masks, caps (for example 110169), shoe covers long/short, etc.

do you sell anti chafing /cooling shorts...

Hey
I’m looking for a Jersey soccer

Inquiry About 1-1/2 inch Industrial Air Impact Wrench With 3 Inch Short Anvil

Inquiry about mens spandex shorts

Short grain white rice

Good day, dear colleagues! Tell me, are you engaged in the production of a polymer pipe with the following characteristics: A polymer pipe consisting of two layers. Between the layers - polymer fiber or polymer thread. Outer diameter 15 mm Inner diameter 5 mm Pressure 40 MPa Short-term temperature  120 degrees Scope: for supplying chemical reagents in the oil industry. The material can be: Copolymer propylene or Block copolymer The required quantity is 115 kilometers I attach photographs. 

Hi, i am looking for high quality golf shirts short sleeved and a golf vest that I can design myself

I'm looking for some childrens dance tops and shorts or briefs 

Inquiry about short bill foam plain gorra trucker cap mesh hat

I would like to know if it would be possible to buy 750 pieces (jersey shorts and socks) distributed for a soccer event that we play, we would need 10 different colors (red, blue, light blue, pink, yellow, black, white, orange, burgundy, green) or even fluorescent colors. We would like the same pattern for all 10 colors, and a breakdown by size in M, L, XL of the shirts. Also I would like to ask would it be possible to print these with numbers on the back (from one to ten) and maybe a logo? If all this would be possible, could you get me a quote? SO A QUOTE OF 750 PIECES, 10 DIFFERENT COLORS, 75 JERSEYS PER COLOR DIVIDED INTO 40L, 25M AND 10 XL And afterwards if it would be of interest to us to have samples? So we can evaluate jerseys and sizes especially? For any questions I remain available.

I'm looking for   Casing 18 5/8 OD, 96.5ppf, K-55, ERW, R3, PSL-1, API BTC, C/W Tread Protectors, 2200 meter For a very short deal
Hi. Dear Friend I'm looking for   Casing 18 5/8 OD, 96.5ppf, K-55, ERW, R3, PSL-1, API BTC, C/W Tread Protectors, 2200 meter For a very short deal & ready to dispatch

would like to have your offer for the supply of the following tender items with lead time and Data sheet. MPPT charge controller, efficiency not less than 92 %, and shall meet the following specifications. voltage, as per technical specifications Controller must utilize passive cooling (not fans); Should allow parallel operation, i.e more than one unit can be connected in parallel. Controllers to be certified CE or UL and to meet at least one for the following or equivalent standards IEC 62509 or IEC 62093; The device should have LED or LCD display. Equipped with SPD in the upstream input for each Charge Controller. Product warranty shall be 5 years. 228 Pcs MPPT Charge Controller Rated 85A - 100 A, at least 150 VDC input voltage. 148 Pcs MPPT Charge Controller Rated 100 A, at least 150VDC input voltage. 83 Pcs MPPT Charge Controller Rated 100 A, at least 450VDC input voltage. Off-Grid Inverter single phase, pure sine wave, 230 V, 50Hz as per below technical specifications. - The inverter shall produce pure sine wave form with provision for battery charger, and it can be configured individually or in parallel - Output frequency shall be 50 Hz - Designed for indoor enclosure not less than IP 20 - Maximum efficiency should be not less than 90 % at full load - To be certified to meet at least CE and UL marking and complaint with IEC 62109 - The device should be integrated with LED indicators or LCD display - It shall allow adjustment of battery voltage and charging current - The device shall allow connection to grid and/or backup generator(s) - The charging function of the inverter/charger shall include battery charging functionality   and the inverter shall be wired in ways that make use of the inverter battery charging   functionality if the installation includes either mains power or a diesel generator. - Protections required: AC overload and load short circuit, overvoltage, overheating and battery reverse polarity - The inverter shall allow internet connection for remote monitoring - Product warranty shall be 5 years. 22 Pcs 7KVA Solar Off-Grid Inverter. 69 Pcs 10KVA Solar Off-Grid Inverter. . 116 Pcs 15KVA Solar Off-Grid Inverter. 

We interested in autoclave data loggers \"Short probe, ZC01TS-P\" 

Hello
I am interested in buying soccer training equipments

Micro diagonal beach shorts

Hi friend how many minimum order for this