Inquiry About Continuous dyeing Wool Scouring Machine Stainless steel output sheet

Inquiry About OEM special L shape stainless steel/steel Zinc-pated,galvanzied deep drawn right angle/left angle metal stamping bracket

Please provide us with an offer  for ring mechanical top lock, part # SZ 21-30-A6, Qty = 200 Pcs, as attached drawings with picture. Note: - Equivalent metal is acceptable          - Any stock quantity will be preferred This is a ring for mechanical top lock, seat assembly Material: Stainless steel, UNS S302X0 or UNS S30XX3 Hardness: HRB 79 to HRC 23 Base Material Minimum Yield Strength: 35 ksi Dimensional tolerance OD  0.00/-0.13 mm ID  0.13/-0.00 mm Height ±0.13 mm 

 Our company is interested in buying following products: Cylinder accumulator with charging unit charging unit, for API 53B mechanical seal system API 53B mechanical seal system, complete. Each accumulator is supplied with a spare parts kit consisting of consisting of: -Elastic cylinder-1pc; -Gas valve assembly-1pc; -Hydraulic valve (port) in assembly-1pc; -Kit of sealing rings for hydraulic accumulator repair-1pc Maximum working pressure: 2600 kPa; Operating temperature: -29 to 75°C; Design temperature: -40 to 400°C (only for metal part); Accumulator volume: 50 liters. Working medium: diesel fuel. Connection thread of the elastic cylinder charging unit: G1/4 or 5/8 BSP. Body material stainless steel. Quantity- 3 set Please give me a quotation.

Dear Sir or Madam, I would like to ask you for a cost estimate for perforated sheets. Please for two materials stainless steel 316 and aluminum 99.5. EN AW-5083 3.3547 (ALMG4,5MN0,7). The contact surface must be flat. The materials must not contain zinc or zinc alloys. We only need rectangular plates. They don\'t have to be sawn exactly. It doesn\'t matter whether they are 4 or 5 mm longer or shorter. I gave you the dimensions in my first message. For us, it is important that the edges are rounded so that nobody injures themselves. The materials must be resistant to corrosion, heat >120°, high humidity 95 %. 76 pieces (perforated plates) with the following parameters: Length: 108 cm Width: 98 cm Thickness: 1.5 ≤ 2 mm 22 pieces (perforated sheets) with the following parameters: Length: 98 cm Width: 81 cm Thickness: 1.5 ≤ 2 mm 18 pieces (perforated sheets) with the following parameters: Length: 90 cm Width: 60 cm Thickness: 1.5 ≤ 2 mm 8 pieces (perforated sheets) with the following parameters: Length: 200 cm Width: 100 cm Thickness: 1.5 ≤ 2 mm For all sheets we want round hole diameter 3 cm. Distance between two holes (from center point to center point) min. 40 ≤ 50 mm. Hole pattern single row. The number of holes at your own discretion. 

Inquiry About Stainless steel /alu. sheets NO.4, Hairline belt grinding machines, Hairline brushing machines

Need data sheet on GX in stainless Steel

Can you provide warm Rolling MIll to roll Stainless steel and aluminium together to form clad tri-ply sheet.