We need two-seater snowmobiles meeting strict technical specifications:
- 4-stroke engine with cylinder volume ≥976/2 cm3 and power ≥72HP
- Liquid cooling system and fuel injection
- Hydraulic disc brake system with CVT transmission (low/high/reverse/neutral)
- Electric starter, heated grips, headlight, and speedometer/odometer
- Fuel tank capacity ≥42L, oil tank ≥2.5L
- Maximum speed ≥110km/h
- Wet sump lubrication with replaceable filter
Please provide technical compliance confirmation with commercial offer.

We require a compact 4-inch sputtering system with 4 targets for producing multilayer optical filters.  
Key specifications:  
- Target materials: Ag (DC power) + SiO?/TiO?/Al?O? (RF 13.56MHz with auto-matching)  
- Chamber configuration: 1 main chamber (preferred load-lock design)  
- Gas requirements: Ar process gas supply with O? port reservation  
- Essential feature: Substrate rotation capability  

Looking for suppliers with proven experience in optical deposition using sputtering technology. Please provide technical specifications and process validation data. No reactive gas process required at initial stage.

We require multiple machine parts for filter combiner system. Specific models needed include:  
- AC Servo Drive (MR-J4-40A)  
- PLC (XGP-ACF2) with IO Link Cable (C40HF-10PB-1)  
- Power Supply (FDR180-24) and Noise Filter (ENS-2006)  
- Magnetic Contactors (MC-12b, MC-12a, MC-22b, MC-32a)  
- Circuit Breakers (3RGrhn, ABE 32b, ABN 103C)  
- Inverter Drive (0075G100-2E0NN)  
- Protective components (GCP-32AN, EOCRSP10RM, EOCRSP20RM)  
 
Please provide pricing and availability for these specific models. OEM equivalent alternatives acceptable for non-critical components.

We require CAT brand spare parts for our power plants in Iran. Specific part numbers needed:  
Spark Plug - 346-5123 and 479-7702  
Oil Filter - 1R-0726 and 275-2604  

Please provide your best prices with terms and conditions. Immediate purchase will follow competitive quotation.

We are seeking water purification systems to distribute in Costa Rica. Detailed requirements:  

Type II Water System:  
- Pretreatment with 0.5 micron & carbon filters  
- Integrated RO, EDI and UV components  
- Minimum 3L/hour production with 30L storage tank  
- Wall/table mounting capability  
- 115VAC 60Hz compatibility with IEC13 connector  
- Real-time monitoring of conductivity/resistivity & temperature  

Type I Water System:  
- Direct integration with Type II system output  
- 18.2 MΩ·cm resistivity at 25°C  
- ≤5 PPB TOC with mixed resin & UV photo oxidation  
- 0.22 micron final filter and leak detection  
- Flow control: 2L/min with multi-speed dispenser  
- Automatic recirculation & filter replacement alarms  
- Volumetric dispensing (100ml-25L) & pedal option  

Common Requirements:  
- IEC13 power connection with 2.5m cable  
- 100-240VAC 60Hz voltage compatibility  
- Parameter displays for both systems  
- TOC monitoring for Type I  

Please provide technical specifications, MOQ, pricing, and lead time.

Valve: Safety, Model: Mercer Valve 9100E, Unit: PCS, Quantity: 10. Valve: Safety, Specification: 2"-150 X 3"-150, Unit: PCS, Quantity: 10. Positioner: Fisher, DVC6020AC, Description: Positioner Fisher DVC6020AC. For rotary and long - stroke actuators with sliding stems (stroke > 102 mm / 4 inches). Input signal: Analog 4–20 mA DC, Output signal: Pneumatic, as required by the actuator, up to full supply pressure, Operating pressure range: Min. 0.4 bar (6 psi), Max. 9.5 bar (140 psi), Unit: PCS, Quantity: 2. Liquid Level Controller: Fisher L2, Description: Snap - acting liquid level controller Fisher L2. Float - operated level sensor mounted on tank wall. Float movement is transferred to the controller via a vertical rod. Controller type: Snap - acting, Connections: Supply: 1/4" NPT (female), bottom of housing, Output: 1/4" NPT (female), top of housing, Case vent: 1/4" NPT (female) with filter, back of housing, Unit: PCS, Quantity: 2. Positioner: Samson Power Control, Model 3730 - 2, Model: 3730 - 230001001000.01, In the shortest possible time

Inquiry About Hydraulic Filter Press. For normal feed rate of 55 kg/hr (option to add plates equivilent to 100 kg/hr), Temp=room, atmospheric pressure, solid contant=20%, solid materia= CaCO3,pH=9, power=220V,solid partical size= 50 micron

We have a new project for making silent inline fan, so advice the best carbon filter for the following specification: voltage supply 220v/50hz, power 300 watt, air flow 500 - 800 m3/h, wind pressure (PA), filtration accuracy up to 0.3 micro 99.9%, 4 layers or 6 layers.

Need 100 Nos of power sprayer for agriculture. Please offer the best price with catalog and technical specification. Payment: LC at sight. Shipment: CFR by sea to Chittagong, Bangladesh. The country of origin should be Japan/Korea/USA/UK/EU countries. Manufacturing year should not be before 2024. The power sprayer should be a high - efficiency backpack type with durable material, easy to operate, with tank capacity of 16 - 20 liters, tank materials of HDPE/Food grade and wide opening filter cup, tank color of white/transparent, power source of rechargeable battery, battery voltage of 18 - 25 volt, and battery AH of 2.5 - 3. Brand, model, and country of manufacturer to be mentioned by the bidder.

We are currently planning to set up an edible oil refining and packaging plant and are exploring reliable and experienced manufacturers for the complete set of edible oil refinery machinery. Specifically looking for: Small to medium - scale refining capacity (e.g., 3?￠????5 tons per day); Suitable for processing sunflower, soybean, and palm oil; Include components such as neutralization, bleaching, deodorizing units, oil filter, filling, labeling, and packaging line; Complete installation support and after - sales service; FOB and CIF price quotes (including shipping to Birgunj or Kolkata port); Power requirement and technical details; Warranty terms and spare parts availability. Please share your best offer, product catalog, photos/videos of your machines, and estimated delivery time.

We are interested in the following machines: 1. semi automatic pneumatic filler: we want two heads, a larger one for plum jam (40-50mm) and a thinner one for thinner liquids. With a power of 60W or so. 2. cans canning closing sealing machine small semi-automatic: Can aluminum cans, tin cans and other types of cans be filled with the same capping head, or do they each require a different head? What heads do you provide with the machine? 3. juice duplex filter: We would like two filter cartridges, one 250 micron and one 100 micron. Does it come with a stand to hold the filter? 4. seed remover machine: Is it suitable for pitting various fruits? If different trays are needed for different sized fruits, we would be interested in a tray suitable for pitting cherries, plums and peaches. 

 I am writing to inquire about an offer for a polypropylene spun filter cartridge making machine with the following specifications: Power: 35 kW Capacity: 3500 pieces/day Micron Range: 1 to 100 microns Extruders: 2 set Mold: 2 set feeder: 2 set air heater: 1 set air compressor 1 set Could you kindly provide the pricing, lead time, and any additional details about the machine that would be relevant for our purchase decision?

would like to have your offer for the supply of the following tender items with lead time and Data sheet. MPPT charge controller, efficiency not less than 92 %, and shall meet the following specifications. voltage, as per technical specifications Controller must utilize passive cooling (not fans); Should allow parallel operation, i.e more than one unit can be connected in parallel. Controllers to be certified CE or UL and to meet at least one for the following or equivalent standards IEC 62509 or IEC 62093; The device should have LED or LCD display. Equipped with SPD in the upstream input for each Charge Controller. Product warranty shall be 5 years. 228 Pcs MPPT Charge Controller Rated 85A - 100 A, at least 150 VDC input voltage. 148 Pcs MPPT Charge Controller Rated 100 A, at least 150VDC input voltage. 83 Pcs MPPT Charge Controller Rated 100 A, at least 450VDC input voltage. Off-Grid Inverter single phase, pure sine wave, 230 V, 50Hz as per below technical specifications. - The inverter shall produce pure sine wave form with provision for battery charger, and it can be configured individually or in parallel - Output frequency shall be 50 Hz - Designed for indoor enclosure not less than IP 20 - Maximum efficiency should be not less than 90 % at full load - To be certified to meet at least CE and UL marking and complaint with IEC 62109 - The device should be integrated with LED indicators or LCD display - It shall allow adjustment of battery voltage and charging current - The device shall allow connection to grid and/or backup generator(s) - The charging function of the inverter/charger shall include battery charging functionality   and the inverter shall be wired in ways that make use of the inverter battery charging   functionality if the installation includes either mains power or a diesel generator. - Protections required: AC overload and load short circuit, overvoltage, overheating and battery reverse polarity - The inverter shall allow internet connection for remote monitoring - Product warranty shall be 5 years. 22 Pcs 7KVA Solar Off-Grid Inverter. 69 Pcs 10KVA Solar Off-Grid Inverter. . 116 Pcs 15KVA Solar Off-Grid Inverter. 

 quote for the supply and delivery of the following item/s: 2,585 pce Filter Bag Model: CS31 Bag Size: 130mm dia X 8065mm length, 580g/m2 Application: Filter Baghouse for Coal Fired Power Plant Material: PPS/PPS 584 CS31 TAN 98645           PTFE Coated, Oil

Hello! I am writing to inquire about: 1. HYDAC FCM60 Machine Oil Purifier - 4 sets Technical parameters: Capacity 60 liters per minute . Pump with filter bypass switch. Filter . Filter elements 10 microns . Visual sensor clogging filter Suction hose with threaded connection 5 meters long. Injection hose with threaded connection 5 meters long. Seal material FKM ( FPM ) for pumping L HFC and HFDU . Working pressure from 6 Bar . Range viscosity 15-500 mm2/s. Working liquid L-HFC, HFDU, HLP, CLP. The length of the power cable is 10 meters. Empty weight up to 135 k Please send us your PRICE QUOTE including lead time, country of origin, and warranty. 

1. Air shower: Dimensions: 1300x2000x2150 mm Internal dimensions: 855x1855x1970 mm width, depth, height Powder coated steel material Electric door interlock Mouth blowing 24 pieces Hepa filter 610x610x75 mm 2 pcs G4 coarse filter 2 pcs 2 units, 1.3 kW fan motor Controller 1 set, blowing time display Power source 380V, 3 phase" 和 2. Air shower: External size 3000 x 3000 x 2500 mm Internal dimensions 2400x3000x2300mm (width x depth x height). Electric door interlock. Motor 6 pcs, hepa filter 610x610x75mm 6 pcs. Mouth blowing 52 pieces. Speed at the mouth of the blower is 20-22m/s, power source is 380v, 50Hz. 4.5KW 3 lights, recessed LED lights. Automatic rolling door. - Size: 2000x2500mm. Speed: 0.8 - 2 m/s 1.2mm thick 304 stainless steel guide rail, 1mm thick 304 stainless steel cover box There is a transparent PVC screen observation window."

WHAT'S THE PRICE OF THE DEADLINE ANCHOR SENSOR
Also I need the prices of the following items-  XBSY LINER WASH PUMP (COMPLETE SET OF MOTOR AND PUMP) (Model- 32SB180J, Capacity-7.5m3/hr, Power- 2.2KW, 1420RPMBLEED-OFF VALVE FOR ZPEC F-1600HL MUD PUMPACTUATOR FOR DRAWWORKS SPEED CONTROL (BRAKE ACTUATOR)CROWNOMATIC FOR DRAWWORKSKICK-BACK ROLLERSPOWER TONG DIESPOWER TONG JAWS (5 1/2",4 1/2",
HYDRAULIC HOSES (3 1/8", 1/4", 3/8", 1/2", 1",
XBSY LINER WASH PUMP (COMPLETE SET OF MOTOR AND PUMP) (Model- 32SB180J, Capacity-7.5m3/hr, Power- 2.2KW, 1420RPM)
BLEED-OFF VALVE FOR ZPEC F-1600HL MUD PUMP
ACTUATOR FOR DRAWWORKS SPEED CONTROL (BRAKE ACTUATOR)
CROWNOMATIC FOR DRAWWORKS
POWER TONG JAWS (5 1/2",4 1/2",
CONTROL VALVE FOR AIR TUGGER
AIR REGULATING VALVE WITH
with filters
with filters
OPERATING VALVES (BOTH MANUAL AND ELECTRIC) FOR HPU.

Dear Sir/Madam, My name is Sakkas Dimitris. We are looking for a complete production line for wood pellets from pine, fir and elm trees. The production line capacity should be around 3,5 tones/hour and the line should be up and running for 8000h/year. The production line should consist of: -Wood chipper 12 t/h -Wood chips cleaner 12t/h (separation from dust, mud etc) -Furnace (15MW thermal power) using solid state fuels ie. wood chips, charcoal etc. -Dryer with chip conveyor (input) and all the components required for air transportation of dried chipps to pellet mills (output) -Wood chip mill 3,5t/h -Pellet mills (ring die) for 3,5t/h (including peripherals, compression 25mm) -Pellet Cooling system -2x Packing system for 15 (plastic bags) and 40kg (cotton bags) This production plant should include all electrical connections, automation systems and all the peripherals like cyclones, filters, conveyors, furnace fuel feed supply system and ash removal system. We are looking forward to an initial offer from your side. The offer should include the transportation of the plant to our  facilities in Karditsa, Greece and the proper installation. Thank you very much in advance for your cooperation. 

Dear Concern, Greetings from PILLER Power System. We are interested in participating in an international tender invited by the Bangladesh Power Development Board (BPDB) for the following items and quantities:   (1) First Stage Filter (Coalescer) – Quantity: 4,320 Pcs (2) Second Stage Filter (Pre-Filter) - Quantity: 4,320 Pcs (3) Third Stage Filter (Fine Filter / Mini Pleat) – Quantity: 2,160 Pcs. The filters will be used in Sylhet 225MW CCPP Power Plant. If you are interested we may proceed with the discussion. Waiting to hear from you. 

Please send me a catalogue & prices. We need this model DLS-250 DLS ZLSH Vertical Completely Fully Automatic Filtration Drainage Sewage Cleaning Water Filter for technical cooling water supply treatment for Hydropower hydroelecric power Plant HPP HEPP SHPP SHEPP Kindly contact Faheem Javed +923006754767 whatsapp