-
I need to purchase 1 unit of GPS disciplined oscillator for product testing purposes. The device must support 10Mhz frequency output with 1PPS synchronization capability, capable of generating both square and sine wave signals. Required delivery timeframe is approximately one month after order confirmation. Please provide your best offer.
Spain
Posted at: 2025-09-08 21:10:04******Email:****** -
We are a manufacturer of medical devices, and we use high-voltage capacitors in our shockwave generator product. Currently, we are using Part Number: SV17KC273KAR (Kyocera AVX), Type: Radial - leaded MLCC, Capacitance: 0.027 μF (27,000 pF), Rated Voltage: 5 kV DC, Dielectric: X7R, Application: High - voltage, repetitive pulse discharge in a medical device, Quantity per unit: 6 pcs. We are looking for a customized capacitor with the same or improved electrical characteristics as above. We are open to either High - voltage MLCC type or Pulse - rated film or oil - filled capacitor. Required parameters: Capacitance: 0.027 μF ±10% (or closest standard value), Rated Voltage: ≥5 kV DC (higher preferred), High dv/dt capability and suitable for repetitive pulse discharge, Low ESR and ESL, High reliability for medical application, Operating temperature: –25°C to 85°C (or better). Please provide recommended existing models (if available) matching the above specs. and options for custom
India
Posted at: 2025-08-10 16:10:03******Email:****** -
We are looking for Peltier modules for electric generation devices in wood stoves.
Chile
Posted at: 2025-06-16 10:30:08******Email:****** -
Inquiry about a 16 g/h water filter industrial ozone generator for water treatment. We are developing a CarWash reclaim system. Please prepare a quote for one unit. Also, what shipping options are available
Greece
Posted at: 2025-06-01 15:46:26******Email:****** -
Inquiry About WB - SG2 BG7TBL 3.2" 1Hz - 4.4G/Wideband Signal Source Device Generator
France
Posted at: 2025-05-31 20:48:35C******Email:****** -
I need parts for MP-1000 ozoe generator 114vols USA. I need **BOARD** for ozone generator
Netherlands
Posted at: 2025-05-10 09:50:02******Email:****** -
buenas noches, ustedes tienen medidores de ozono residual?
Ecuador
Posted at: 2025-05-08 13:25:52P******Email:****** -
Inquiry about 3g/h portable 0 to 100% control ozone machine water ozonator for water treatment
Netherlands
Posted at: 2025-05-08 06:52:04D******Email:****** -
A sustainable power generating device that runs only on industrial magnet
Small but generate electric current continuously without needing recharging
Just Magnet, coils, wires, boards and output sucketUnited Kingdom
Posted at: 2025-04-14 20:40:03T******Email:****** -
would like to have your offer for the supply of the following tender items with lead time and Data sheet. MPPT charge controller, efficiency not less than 92 %, and shall meet the following specifications. voltage, as per technical specifications Controller must utilize passive cooling (not fans); Should allow parallel operation, i.e more than one unit can be connected in parallel. Controllers to be certified CE or UL and to meet at least one for the following or equivalent standards IEC 62509 or IEC 62093; The device should have LED or LCD display. Equipped with SPD in the upstream input for each Charge Controller. Product warranty shall be 5 years. 228 Pcs MPPT Charge Controller Rated 85A - 100 A, at least 150 VDC input voltage. 148 Pcs MPPT Charge Controller Rated 100 A, at least 150VDC input voltage. 83 Pcs MPPT Charge Controller Rated 100 A, at least 450VDC input voltage. Off-Grid Inverter single phase, pure sine wave, 230 V, 50Hz as per below technical specifications. - The inverter shall produce pure sine wave form with provision for battery charger, and it can be configured individually or in parallel - Output frequency shall be 50 Hz - Designed for indoor enclosure not less than IP 20 - Maximum efficiency should be not less than 90 % at full load - To be certified to meet at least CE and UL marking and complaint with IEC 62109 - The device should be integrated with LED indicators or LCD display - It shall allow adjustment of battery voltage and charging current - The device shall allow connection to grid and/or backup generator(s) - The charging function of the inverter/charger shall include battery charging functionality and the inverter shall be wired in ways that make use of the inverter battery charging functionality if the installation includes either mains power or a diesel generator. - Protections required: AC overload and load short circuit, overvoltage, overheating and battery reverse polarity - The inverter shall allow internet connection for remote monitoring - Product warranty shall be 5 years. 22 Pcs 7KVA Solar Off-Grid Inverter. 69 Pcs 10KVA Solar Off-Grid Inverter. . 116 Pcs 15KVA Solar Off-Grid Inverter.
Pakistan
Posted at: 2025-01-20 22:19:32******Email:****** -
Inquiry About 500mg Ozone Generator Kits Ozone modules AOT-D-500 pro air treatment
United States
Posted at: 2024-12-19 09:10:45******Email:****** -
I’m interested in an 80g ceramic enamel ozone tube
Guatemala
Posted at: 2024-10-26 20:19:05A******Email:****** -
Inquiry About water purifier ozone generator 10G 20G 30G 40G ozone generator with built in oxygen concentrator
Trinidad and Tobago
Posted at: 2024-03-18 21:56:55L******Email:****** -
do u ship to nz
New Zealand
Posted at: 2023-12-28 17:40:03******Email:****** -
Hello I am seriously interested in purchasing two UV Printing Plotters with Led Lamps : 1. one with a printing field width of 3.2m 2. a second flat plotter with a printing field width of 2.5 x 1.3m or 2.5 x1.5m, exclusively from the manufacturer of these plotters. I need multipurpose plotters : for printing on paper, film, vinyl, carves, mesh netting...etc. I am only interested in the latest generation plotters. Incorporating the latest developments in recent years, using new generation heads and other solutions. Please send me the exact specifications of the proposed Plotter, the price of it, the proposed necessary spare parts and optional equipment with a description of its use. Please do not send the offer(documents) in the body of the email , please send everything as attachments. Photos and other documents pasted the content of the email do not always open. I prefer door to door delivery. Place of delivery Poland. Miato Ostroleka code. 07-410 1.Please provide the HS code of the printers 2.Does your company have its service in Poland? 3.Please provide the total cost of delivery including transportation to Poland or Europe if it is cheaper than to Poland? 4.Certificate admitting printers to the European market and meeting its standards. 5. delivery time / deadline. 6. the proposed form of payment limiting my risk. ? 7. reliable guarantee for the devices as to their quality and delivery.
Poland
Posted at: 2023-11-24 20:03:58******Email:******