Kindly submit your best offer. Overcurrent and Earth fault Protection Relay 3 phase, Self - Powered, P116L1N1N13NN1111N, Micom P116, Schneider. P116L1N1N13NN1111N, Micom P116, 1. 

1 X VEGAPULS 64, RADAR SENSOR; FOR CONTINUOUS LEVEL MEASUREMENT OF LIQUIDS; MAKE: VEGA; PART NUMBER: PS64.AXGFNIHXKMKXX (eID: ZA99712825); APPROVAL X : FOR EX-FREE AREA; ANTENNA VERSION / SECOND LINE OF DEFENCE G : FLANGE WITH ENCAPSULATED ANTENNA SYSTEM / WITH PROCESS FITTING / MATERIAL FN : FLANGE DN100 PN40 Form C, DIN2501 / 316/316L MATERIAL / SEAL / PROCESS; TEMPERATURE I : PTFE / PTFE / -40... 130 °C ELECTRONICS H : TWO-WIRE 4 ... 20 mA/HART SUPPLEMENTARY ELECTRONICS X : WITHOUT OPTIONAL OVERVOLTAGE PROTECTION : WITHOUT HOUSING / PROTECTION K : PLASTIC SINGLE CHAMBER / IP66/IP67 CABLE ENTRY / CONNECTION M : M20x1.5 / CABLE GLAND PA BLACK (?5-9mm), STANDARD; DISPLAY/ADJUSTMENT MODULE PLICSCOM K : MOUNTED; WITH BLUETOOTH, MAGNETIC PEN OPERATION; ADDITIONAL EQUIPMENT X : WITHOUT CERTIFICATES X : No MAX. MEASURING RANGE : 30.000 m OPERATING INSTRUCTIONS : EN - ENGLISH NUMBER OF OPERATING INSTRUCTIONS : 1 MIN. PROCESS PRESSURE IN BAR : -1.000 MAX. PROCESS PRESSURE IN BAR : 16.0

would like to have your offer for the supply of the following tender items with lead time and Data sheet. MPPT charge controller, efficiency not less than 92 %, and shall meet the following specifications. voltage, as per technical specifications Controller must utilize passive cooling (not fans); Should allow parallel operation, i.e more than one unit can be connected in parallel. Controllers to be certified CE or UL and to meet at least one for the following or equivalent standards IEC 62509 or IEC 62093; The device should have LED or LCD display. Equipped with SPD in the upstream input for each Charge Controller. Product warranty shall be 5 years. 228 Pcs MPPT Charge Controller Rated 85A - 100 A, at least 150 VDC input voltage. 148 Pcs MPPT Charge Controller Rated 100 A, at least 150VDC input voltage. 83 Pcs MPPT Charge Controller Rated 100 A, at least 450VDC input voltage. Off-Grid Inverter single phase, pure sine wave, 230 V, 50Hz as per below technical specifications. - The inverter shall produce pure sine wave form with provision for battery charger, and it can be configured individually or in parallel - Output frequency shall be 50 Hz - Designed for indoor enclosure not less than IP 20 - Maximum efficiency should be not less than 90 % at full load - To be certified to meet at least CE and UL marking and complaint with IEC 62109 - The device should be integrated with LED indicators or LCD display - It shall allow adjustment of battery voltage and charging current - The device shall allow connection to grid and/or backup generator(s) - The charging function of the inverter/charger shall include battery charging functionality   and the inverter shall be wired in ways that make use of the inverter battery charging   functionality if the installation includes either mains power or a diesel generator. - Protections required: AC overload and load short circuit, overvoltage, overheating and battery reverse polarity - The inverter shall allow internet connection for remote monitoring - Product warranty shall be 5 years. 22 Pcs 7KVA Solar Off-Grid Inverter. 69 Pcs 10KVA Solar Off-Grid Inverter. . 116 Pcs 15KVA Solar Off-Grid Inverter.