We require a pump pressure test system capable of handling maximum pressure of 725psi (50 bars) with 1/2" NPT pressure hose connection. The unit should have 3.6 gallons tank capacity and operate within maximum temperature of 50°C (120°F). Required specifications include piston volume of 2.3 cubic inches, dimensions 28"x8.5"x9.5", and weight under 14lbs. Please provide RIGID Model 50557 (Catalogue 1450). Looking to purchase 2 units for leak detection in heating, potable water, fire sprinkler, compressed air, small bore pipe lines, and oil systems.

Require 2 units of 15KW gear motors for escalator drive systems. Specifications must include:
 
Motor Specifications:
- 400/690V 60Hz
- 1200 RPM
- IP65 protection
- F class insulation
- 27.5:1 gear ratio
- 190A starting current
- S6-60 duty cycle

Gear Specifications:
- TKN-160 model
- 20-tooth sprocket
- 95mm drive chain compatibility
- VG460 synthetic oil lubrication
- 13.5L oil capacity

Dual motor configuration required with right/left side sprocket orientation. Must comply with ambient temperature rating up to 40°C.

Require quotation for Wika brand temperature gauges with specifications:  
1. Technical Parameters:  
- Stem diameter: 8mm  
- Ranges: 0?C-100?C & 0?C-150?C variants  
- Length options: 130mm/170mm/310mm/330mm/360mm/390mm  
2. Quantity Breakdown:  
? 0-100?C models: 4+2+5=11 units  
? 0-150?C models: 4+1=5 units  
3. Special Requirements:  
- Damping fluid filling  
- Any angle mounting capability  
Please provide pricing, production lead time, and minimum order quantity.

We are a manufacturer of medical devices, and we use high-voltage capacitors in our shockwave generator product. Currently, we are using Part Number: SV17KC273KAR (Kyocera AVX), Type: Radial - leaded MLCC, Capacitance: 0.027 μF (27,000 pF), Rated Voltage: 5 kV DC, Dielectric: X7R, Application: High - voltage, repetitive pulse discharge in a medical device, Quantity per unit: 6 pcs. We are looking for a customized capacitor with the same or improved electrical characteristics as above. We are open to either High - voltage MLCC type or Pulse - rated film or oil - filled capacitor. Required parameters: Capacitance: 0.027 μF ±10% (or closest standard value), Rated Voltage: ≥5 kV DC (higher preferred), High dv/dt capability and suitable for repetitive pulse discharge, Low ESR and ESL, High reliability for medical application, Operating temperature: –25°C to 85°C (or better). Please provide recommended existing models (if available) matching the above specs. and options for custom

GAUGE,PRESSURE: TYPE: INDUSTRIAL, RANGE: 0 - 40 BAR, DIAL SIZE: 100MM, SIZE/CONNECTION: 1/4" MNPT, CASE MATERIAL: 304 SS, TUBE MATERIAL: SS BOURDON, CONNECTION MATERIAL: 316 SS, CONNECTION LOCATION: LOWER BACK, MOUNT: FLUSH PANEL WITH FRONT FLG, FILLED: GLYCERINE, IP DESIGNATION: IP65, OPERATING TEMPERATURE: -20 TO 90 DEG C. TEXT: 2/1/2% OF SPAN ACCURACY, WHITE ALUMINIUM DIAL WITH BLACK MARKING, SAFETY GLASS, BLACK ADJUSTABLE POINTER, BLOW OUT CAP, MANUFACTURER DETAILS: MFG: WIKA:P/N: 232.50, MFG: ASHCROFT:P/N: 232.50. Uom, ea. Qty, 1. GAUGE,PRESSURE: TYPE: INDUSTRIAL, RANGE: 0 - 60 BAR, DIAL SIZE: 100MM, SIZE/CONNECTION: 1/2" MNPT, CASE MATERIAL: 304 SS, TUBE MATERIAL: SS BOURDON, CONNECTION MATERIAL: 316 SS, CONNECTION LOCATION: BOTTOM, FILLED: GLYCERINE, IP DESIGNATION: IP65, OPERATING TEMPERATURE: -20 TO 90 DEG C, APPLICATION: GAS TURBINE. TEXT: 2/1/2% OF SPAN ACCURACY, WHITE ALUMINIUM DIAL WITH BLACK MARKING, SAFETY GLASS, BLACK ADJUSTABLE POINTER, BLOW OUT CAP, MANUFACTURER DETAILS:

We are looking for a Hydraulic oil flowmeter which has technical specifications below, TECHNICAL SPECIFICATIONS Flow range: 3 – 400 L/min, Pressure range: 0 – 420 bar, Fluid temperature: 0 – 120?°C, Flow accuracy: ±1%, Temperature accuracy: ±1% °C, Inlet/outlet thread size: 1" BSPP. The flow rate must be adjustable during measurement (standard valve with safety relief valve). The body shall be aluminum. It shall include at least one rupture  disc or if it does not have can you entegrate it? If you can suggest a product of yours and share price information ? would be grateful.

I want to order 117603960 oil gauge, 01 pc, 01 days

Looking for Chinese manufacturers of Oil-resistant gasket sheet, recommended for high temperatures and pressures. Designed for use in subsurface connections. Recommended for water, steam, fuels, oils, salt solutions, natural gas, propane-butane.

We are planning to procure a Thermal Oil Boiler for our project and request your best quotation based on the attached datasheet and the following key specifications: Type: Thermal Oil Boiler, Horizontal; Service: Intermittent; Capacity: 1,200 Mcal/hr (5,040 MJ/hr); Fuel: Heavy Fuel Oil (HFO); Fuel Firing System: Pressure Jet, Monobloc burner (SAACKE brand or equivalent); Control System: Programmable Logic Control (PLC); Boiler Pumps: 2 units (1 Duty, 1 Standby) – IE3 motor standard; Oil Tank: Elevated, manually filled atmospheric day tank with capacity sufficient for at least 6 hours of boiler operation; Site Conditions: Altitude 12 m ASL; Max. Ambient Temperature 31.6 °C; Humidity up to 83% (tropical wet)

Required Specifications: ? Type: Tubular cartridge heater, threaded 3/8” ? Length: 150mm ? Voltage: 24VDC ? Power: 300W ? Working medium: Oil in a pressurized tank (up to 15 bar) ? Application: To maintain the oil temperature above 0°C during cold conditions ? Cable: Suitable for automotive use, oil-resistant, and rated for the working temperature. Please request: ? Technical datasheet with dimensions and cable details ? Price quotation for sample quantity and 50/100 pcs batch. We forecast 1000 pcs/year ? Lead time ? Available certifications (CE, RoHS, etc.) ? Shipping terms (FOB / CIF)

Receive offer for equivalent of the following pumps: 1. Screw pump (IMO PUMP) ACG 70 - 2N3F 85 - 65 615A - 1986, 2 pcs, fluid - fuel oil, type - screw, vertical pump, capacity - 25.9 m3/h, pressure - 0.2 Mpa, el. motor HXUR 262 A2 V1: 3x380 V, 50 Hz, Rev. 1440 rpm, Output - P = 5.5 kw, IP44; 2. Screw pump (IMO PUMP) ACF 100 - 3N4F, 2 pcs, fluid - lub oil, type: triple screw, Max. working pressure - 10 kg/cm2 at 40 cSt at max. temperature of the lub oil 90 C, el. motor HXUR 405 A V1: 3x380 V, 50 Hz, Rev. 1450 rpm, Output - P = 28 kw, IP44

Service: HP Steam Temperature, Instrument Type: Temperature Gauge, Qty: 1, Description: - Scale Range: 0 to 700°C - Insertion Length: 490 mm - Nominal Diameter: 150 mm - Type of Mounting: Lower back with adjustable stem - Stem Material: 316SS - Process Connection: 1/2" - Connection Material: 304SS - Stem Outer Diameter: 6.4 mm - Extension Nipple: 200 mm (1/2” NPT(F) × 1/2” NPT(M), 316SS), Model: T290, Manufacturer: WISE CONTROL INC. Ask if the product is available.

Request for Quotation for 40 pc of Ammonia Tank Cars. Confirm the receipt of this request and whether interested in providing the best techno - commercial offer. Load capacity: 43.0 t; Tare weight: 36.8 t; Tare coefficient: 0.86; Tank volume (full): 75.5 m?3; Length over coupling axes: 12020 mm; Width (maximum): 3240 mm; Height from railhead level: maximum 5010 mm; To auto coupler axis: 1040 - 1050 mm; Tank car wheelbase: 7800 mm; Load: from axle to rails: 20.35 tc; linear: 6.8 tc/m; Working pressure in tank: 20.0 kg/cm?2; Ambient temperature: D??? - 40 D′D? 50?°D?; Operating speed (design): 120 km/h; Dimensions according to GOST 9238 - 73: 1 - T (drawing reference); Railroad track gauge: 1520 mm

Looking for oil-resistant rubber hose, specifically suction and discharge type, suitable for use in marine environments for the transfer of petroleum products (diesel). Specifications: Type: Suction and discharge hose (reinforced for negative and positive pressure), Inner Diameter: 150 mm (6 inches), Working Pressure: Minimum 20 bar, Length Required: Total 350 meters (can be delivered in standard segments), Temperature Range: From -40?°C to 40?°C, Outer Layer: Abrasion-, saltwater-, and UV-resistant, Application: Marine (floating or fixed) hose for petroleum handling

Specification: 1.Overall size ???380x320x430MM 2.Furnace tube size ?|50MMx ID 44MMX L600MM 3.Supply voltage 220V50HZ 4.Interiorinput power 1.2 KW 5.Temperature control range Room 6.Temperature: -1,200a?? 7.Working temperature a?¤1100a?? 8.Temperature control accuracy ???1000 ?±0.1a?? ??? a?￥1000?±1a?? 9.Thermostatic fluctuation ?± 1a?? (the test point is 1000a??) 10.temperature equalization ?± 3a?? (test point of 1000a??) Include: Vaccum sealing flange with a mechanical gauge thermal block

Inquiry About mold temperature oil heater

Dear Sirs, Good day, Please advise your best price and delivery time for the following items: DESCRIPTION 1. WIKA Detector Resistance Temperature TR10   x 15 pcs P/N: 84240151, Temp. Rating:-50 to 250°C Resistance: 100 OHM Sheath Size: 6MM Dia Element Mat’l: PT100 CLASS B (IEC 60751) Wire configuration: Dual 4-wire Sheath Mat’l: SS 1.4571 Measuring Insert L= (I 5):170mm (A-DIMENSION) 2. WIKA Pressure Gauge, Pressure  x 10 pcs Bourden Tube; Stainless Steel Model: 131.11.050 Nominal Size: 50mm Connection Location: Lower Mount Range: 0 to 30PSI Process Connection: ? NPT Male Thread Used in Booster Compressor at NG Pres Area Kindly ask you to submit your offer until 12/5/2025. Make sure to provide us with the relevant technical data sheets for our further evaluation and EXW terms.

Im asking for a quotation for and oil and temperature sensor for a cummins engine generator Cummins Engine Model: NTA-855-G4 Serial Number: 25417203 Rating: 400 KVA RPM: 1500, 50HZ
Im requesting for a quotation

Looking for thermistor temperature oil baths and testing equipments

is looking for possibility to purchase  RBD coconut oil with following quality characteristics: Melting temperature – 18-22 FFA – 0,10 % max Moisture – 0,10 % max Color (5,25 Lovibond scale ) – 1,5 R max iodine number AOCS – 11 max Peroxide number - 2 meq/kg max Packing : carton boxes Volume: 21,870 mt in 40 ft container

Good day, dear colleagues! Tell me, are you engaged in the production of a polymer pipe with the following characteristics: A polymer pipe consisting of two layers. Between the layers - polymer fiber or polymer thread. Outer diameter 15 mm Inner diameter 5 mm Pressure 40 MPa Short-term temperature  120 degrees Scope: for supplying chemical reagents in the oil industry. The material can be: Copolymer propylene or Block copolymer The required quantity is 115 kilometers I attach photographs. 

 looking for possibility to purchase  RBD coconut oil with following quality characteristics: Melting temperature – 18-22 FFA – 0,10 % max Moisture – 0,10 % max Color (5,25 Lovibond scale ) – 1,5 R max iodine number AOCS – 11 max Peroxide number - 2 meq/kg max Packing : carton boxes Volume: 21,870 mt in 40 ft container 

Please your offer  for Spare parts of Drillmec  MUD Pumps   1 Liner 5-3/4\" supreme  5495575 triplex mud pump F1000 pcs 50 2 6\" liner  1913293  triplex mud pump Drillmec 9T1000 pcs 30 3 Hose  01913286  triplex mud pump Drillmec 9T1000 pcs 2 4 Diaphragm, suction liner dampener 1290195  triplex mud pump 10-P-130 pcs 2 5 Filter 40390823  triplex mud pump Drillmec 9T1000 pcs 4 6 Filter oil   50971359  triplex mud pump Drillmec 9T1000 pcs 4 7 Bladder 20 gal   RI 40392434-01  triplex mud pump Drillmec 9T1000 pcs 2 8 6\" piston assy.  1912163  triplex mud pump Drillmec 9T1000 pcs 30 9 Rod  01913298  triplex mud pump Drillmec 9T1000 pcs 6 10 Counter rod   01913267   triplex mud pump Drillmec 9T1000 pcs 6 11 Extension rod  01913263   triplex mud pump Drillmec 9T1000 pcs 6 12 Liner 6 1/4\" 05-465-625 triplex mud pump 10-P-130 pcs 30 13 Gauge mud pressure  40391187  triplex mud pump Drillmec 9T1000 pcs 2 14 Prerssure gauge RI 40392434-08  triplex mud pump Drillmec 9T1000 pcs 4 15 Ring, fast change screw type threaded  1290451  triplex mud pump 10-P-130 pcs 12 16 Spring  RI40390796-03   triplex mud pump Drillmec 9T1000 pcs 24 17 spring F-1000 PN O-5710-111 pcs 5 18 Locking clip - lower valve guide 6319-0089-00   F-1000 pcs 15 19 Stabilizer plate  RI 40392434-05  triplex mud pump Drillmec 9T1000 pcs 2 20 Stabilizer  RI 40392434-04  triplex mud pump Drillmec 9T1000 pcs 2 21 Washer RI 40392434-02  triplex mud pump Drillmec 9T1000 pcs 2 22 Ring joint gasket R-44 7602-066111 pcs 5 23 Pump without AC motor  40110330  triplex mud pump Drillmec 9T1000 pcs 1 24 Belt 40540058  triplex mud pump Drillmec 9T1000 pcs 2 25 V-belt ,6/8VF3000 Torque Team 47401406  10P130 pcs 4 26 Seat, Valve 1561450  mud pump 10-P-130 pcs 17 27 Valve seat  40390798   triplex mud pump Drillmec 9T1000 pcs 50 28 Piston Assembly  5\"  OTECO PN I-50-B14/15  (with 1 1/2\" to 1 5/8\" bore size) pcs 37 29 Flex joint 6in  40391899  triplex mud pump Drillmec 9T1000 pcs 4 30 Flex joint 8in  40391974  triplex mud pump Drillmec 9T1000 pcs 4 31 Expandable sectors  01913307  triplex mud pump Drillmec 9T1000 pcs 12 32 Stabilizer P/N 6020 PD  Mattco K20 - 5000 PSI   P/N 6020 PD  Mattco pcs 2 33 Collar two half   01913266  triplex mud pump Drillmec 9T1000 pcs 12 34 retainer fast change screw type threaded PN 1290450  mud pump 10-P-130 pcs 10 35 valve, needle 7602-2910-00  PD55 pcs 3 36 Valve  40390797   triplex mud pump Drillmec 9T1000 pcs 12 37 Valve   50640314  triplex mud pump Drillmec 9T1000 pcs 2 38 Charging valve  RI 40392434-07   triplex mud pump Drillmec 9T1000 pcs 4 39 Valve kit  40390796   triplex mud pump Drillmec 9T1000 pcs 50 40 Gasket  01913314  triplex mud pump Drillmec 9T1000 pcs 12 41 Gasket  01913315  triplex mud pump Drillmec 9T1000 pcs 12 42 Gasket  RI 40392434-03  triplex mud pump Drillmec 9T1000 pcs 4 43 Packing, Valve Cover Plate 1540126  mud pump 10-P-130 pcs 27 44 complete valve assembly with urethane insert O-U5B-EH F-1000 pcs 30 45 Bolt and lock washer RI 40392434-06   triplex mud pump Drillmec 9T1000 pcs 2 In addition to the price and terms of payment

Hi
I am looking for inductive pressure and temperature gauge
Please advise the price and lead time for: Pressure gauge – 5 units 4" stainless steel bottom connection explosion proof inductive electric contact pressure gauges Pressure: 0-6 BAR Sanitary Stainless Steel Clamp type Diaphragm, Vibration Resistance Electric Contact Pressure Gauge. Double Limit Alarm Low Limit - Below Set Point the contact - Open High limit - Below Set Point the contact - Close Connection Size: 1.5" (Tri-Clamp 3A) Oil-Fill Type Wiring Configuration: CM 12 Temperature gauge – 5 units 4" stainless steel bottom connection explosion proof inductive electric contact temperature gauges Temperature range: 0-120°C Sanitary type Stainless Steel Electric Contact Thermometer (Single Lower Limit) Probe Diameter: 8mm Insertion Length: 120mm Connection Size: 1.5" (Tri-Clamp 3A) Electrical Contact: Normally-Close (Below set-point the contact-close) Oil-Fill type Wiring Configuration: CM 02 Other requirements: 1. Contact requires intrinsically safe type (Ex ib T4) 2. To provide i