DONGFENG SHINE (LGJE1EE00SM333767) SL NO PART NAME QTY 1 FENDER FRONT RIGHT 1 2 MUD GUARD RIGHT FRONT 1 3 LEFT FRONT FOGLIGHT 1 4 RIGHT FRONT FOG LIGHT 1 5 FRONT BUMPER LOWER 1 6 CLIPS BUMPER 1 7 FRONT BUMPER LEFT TRIM STRIP 1 8 RIGHT DECORATIVE STRIP FRONT BUMPER 1 9 FRONT BUMPER MIDDLE TRIM PANEL 1 10 BLIND RIVET 1 11 RADIATOR 1 12 CONDENSOR 1 13 FAN MOTOR ASSY 1 14 POWER TRAIN LOWER GUARD 1 15 BOLTS 1 16 FRONT BUMPER SKIN 1 17 FIXING FRAME 1 18 LEFT MOUNTING SEAT FRONT BUMPER 1 19 RIGHT MOUNTING SEAT FRONT BUMPER 1 20 FRONT BUMPER LOWER SHIELD 1 DONGFENG SHINE (LGJE1EE02SM333690) 1 SHOCKBSER FRONT RIGHT 1 2 ARM ASSY FRONT RIGHT 1 3 BALL JOINT INNER RIGHT 1 4 BALL JOINT OUTER RIGHT 1 5 SHAFT DRIVE DRONT RIGHT 1 6 CROSSMEMBER LOWER 1 7 HUB ASSY FRONT RIGHT 1 8 STABLIZER LINK FRONT RIGHT 1 9 GUARD FRONT RIGHT WHEEL 1 10 FENDER FRONT RIGHT 1 11 BUMPER REAR 1

I need synthetic grass in role ,  weight 14 hight 80 fit14 by 50 square meter，I need it in purple color

Products: Combination wrenches, impact wrenches, OEM hand tools. Material: Chrome-vanadium (Cr-V) steel, DIN standard. Finishes: Chrome-plated. Satin/Matte (depending on the order).

We are looking to procure nails and wire products. wire un 1.6mm. And nails in 2" an 2 1/2"
5 tons aprox. Probably i need to full a 20" container

I need micro speakers with IP67 waterproof rating according to IEC standards for use in wet environments. The product must maintain audio quality while exposed to moisture. Please confirm if your model YD45B-RB50F8-R1 meets these specifications.

I need quotes for various industrial automation components including servo drives, motors, sensors, and power supplies. Required quantities range from 1 to 2 units per item as specified in the detailed list. Please provide pricing and lead time details for all components. Strictly avoid including any contact information in the response.

1 LENZE - DRIVE,0.75KW - 8200 VECTOR, E82EV751-2C 1 Nos 2 LENZE - DRIVE,0.55KW - ESMD551X2SFA 1 Nos 3 LENZE - SMPS - EME 9361-E FS21002-18-07 2 Nos 4 LENZE - SERVO DRIVE - ECSEA008C4B 2 Nos 5 LENZE - SERVO DRIVE - E84AVSCE3714SB0 - 8400 STATELINE C 2 Nos 6 SCHNEIDER - CONTACTOR 11KW - LC1D25 1 Nos 7 TELEMECHANIQUE - SMPS - ABL8RPS24050 1 Nos 8 LENZE- SERVO MOTOR 0.75KW - GKRO5-2M VAK080C32 2 Nos 9 LENZE- SERVO MOTOR 0.18KW - GKRO3-2M VAR 063C32 2 Nos 10 LENZE - FAN MOTOR 27W - FLA1-BG63 2 Nos 11 LENZE - FAN MOTOR 30W - FLA1-BG71 2 Nos 12 SICK AG - PHOTO ELECTRIC SENSOR 24VDC,PNP - ALZOE-PM331 1 Nos 13 LENZE - FAN MOTOR - FLA1 BG80 1 Nos

Inquiry about spider fitting

We are establishing a new TCT bandsaw blade manufacturing facility and require a complete production line to achieve daily output of 50 pieces with 7-meter length specifications. Priority given to horizontal saw blade grinding equipment and other essential machinery for full-cycle manufacturing. Planning factory visit in China for final equipment verification before order placement.

I need 10,000 pieces of 7" fiber resin discs with 7/8" hole in both 36 grit and 50 grit specifications. Immediate requirements for industrial grinding applications. Please provide competitive pricing and bulk order terms. Delivery timeframe is flexible.

We are an apparel decoration and promotion company seeking AOP sublimated polo shirts with micro-sized logo patterns. Required quantity: 25 pieces. Target price range: $15-25 per piece. Need production within 10 business days. Samples/reference images available for quality alignment.

We require grinding wheels with the following specifications:  
- Grit Type: #100  
- Bore Diameter: 32 mm  
- Outer Diameter: 180 mm  
- Thickness: 10 mm  
- Application: Grinding heat-treated metal (up to 68 HRC hardness)  

Please specify:  
1. Material composition (Alumina/CBN) and bond type  
2. Maximum rotational speed capacity in RPM  
3. Quantity-based pricing with MOQ  
4. Lead time for production and delivery to Jordan  
5. Quality certifications (ISO/industry standards)  
6. Sample testing feasibility before bulk order  

All technical specifications must meet industrial safety requirements.

We require sharpener blades with specifications: 23 x 6.22 x 0.65 mm dimensions, single-side grind, and 2.8 mm bore. Monthly procurement quantity required is 5.8 million pieces. Target price is $0.002 per unit. Technical drawing will be provided for precise manufacturing requirements. Seeking reliable manufacturer capable of maintaining consistent quality at scale.

Require a custom-built misting system with below specifications:

Dual-Liquid Dosing:
- Two separate 5-20L concentrate tanks
- Automatic proportional mixing (1-2% per liquid)
- Integrated with main water line

Pump Requirements:
- Stainless steel plunger pump
- 50-70 bar pressure capacity
- Flow rates: 1L/min (20 nozzles), 3L/min (60 nozzles), 12-15L/min (300 nozzles)

Nozzle Specifications:
- Stainless steel/brass construction
- 3-10μm droplet size
- Anti-drip function

Control System:
- Digital/PLC controller with dosing ratio adjustment
- Programmable misting intervals and cycles
- Optional remote/app control

Compact design preferred (≤50cm x 60cm). Pre-filtration system required to prevent nozzle blockage.}

We require a machine capable of transversely and longitudinally cutting 2-layer paper micro from rolls into sheets.  
Required specifications:  
- Machine width range: 1200mm to 2100mm  
- Maximum roll diameter: 800mm  
- Cross cutting capacity: Minimum 500mm to maximum 1200mm  
- Operational speed: 60-80 meters per minute  
Please provide technical specifications and commercial offer for equipment meeting these parameters.

We require premium lightweight running singlets for our sportswear brand.  
? Fabric specifications: 70-80gsm weight using polyester or polyester/elastane blend  
? Performance features: Micro-mesh/engineered knit construction matching breathability of Nike Aeroswift/Soar/Pressio  
? Order quantity: 50-100 pieces  
? Urgent delivery required for race season preparation  
Please confirm production capabilities and lead time.

We require two medical supply items:  
1. Disposable latex surgical gloves with cornstarch powder, MBS compliance, 1.5 AQL inspection standard, micro-roughened surface, and anatomical shape design.  
2. Hard-case first aid kits measuring 45-61cm in length, 35-41cm in width, and 12-18cm in height. Kits must contain adhesive bandages, sterile gauze pads, antiseptic solutions, medical tape, disposable gloves, spirit solution, and scissors.  

Order quantity: 5 boxes for each product.  
Delivery requirement: 3-5 days after order confirmation.

Looking to purchase industrial gaskets for delivery to South Korea. Please confirm if you can supply KWO Germany gaskets and provide details on specifications, availability, and pricing. We require reliable quality standards and timely shipping arrangements.

1. JIP JOINT, GASKET, - SIZE:25MM X 6MMTHK X 10MR/1ROLL, - EXPANDED PTFE GASKET-TAPE 25BI, - TEMP' : -240~ 270C, - Q'TY : 4ROLL 2. JIP JOINT, GASKET, - SIZE:40MM X 6MMTHK X 10MR/1ROLL, - EXPANDED PTFE GASKET-TAPE 25BI, - TEMP' : -240~ 270C - Q'TY : 8ROLL,

Looking to purchase copper grinding stones in various sizes. Require detailed pricing information for sizes 80, 100, 120, and 150. Need confirmation of product availability and standard specifications to compare options before finalizing procurement decision.

Inquiry about Aficio 1075 Pick-up Roller

Inquiry about Local Control Stand for Hydraulic Anchor Handling / Towing Winch

I'm looking to get price quotations for USB memory devices and micro SD memory cards. Currently interested in comparing market prices but haven't finalized the required quantity yet. Please provide your best offer based on standard bulk purchase quantities for Moldova market.

MMOLYBDENUM EDM , TANTALUM , TITANIUM
MOLYBDENUM EDM WIRE .
0.18MM DIA - 750 SPOOLS FOB PRICE TILL NAVA SEVA (MUMBAI)

We require an automatic steel ball making machine capable of producing grinding balls with diameters up to 1000 mm. The equipment must handle different metal hardness specifications for varied production requirements.

Please confirm delivery timelines and transportation costs to Russia. Specify available technical parameters and production capacity details for evaluation.

I need an MP3 speaker module meeting these specifications:
- Power input: USB 5V (Micro-USB/Type-C)
- Media input: TF card or USB drive compatibility
- Auto-play function upon power activation
- Physical controls: Rocker power switch + volume knob
- 2W mono or 2×3W stereo amplifier
- Integrated speaker required
- Basic plastic enclosure (no custom molds)

Additional requirements:
- Immediate playback when connected to power with switch ON

Please provide:
1. Sample cost with shipping
2. Unit price for 100pcs MOQ
3. Lead time for samples and bulk production