Laser Temperature Meter

Require 85 meters of galvanized steel flexible conduit with 50 mm nominal diameter (ID 51.4 mm/OD 59.5 mm). Must include polymer thread sealing, pulling wire, and meet IP68/IK08 ratings. Product should feature NG, LS, UV-resistant properties with resistance to gasoline, oils, diluted acids, and alkalis. Operating temperature range -40°C to 75°C.  

Specifications needed:  
- Total weight in kilograms  
- Cubic volume for logistics calculation  
- Production lead time and delivery schedule  

Material certifications and compliance with electric shock protection standards required. Samples requested before bulk order.

We require 2 units of Digital Water Velocity Meters meeting specific technical specifications. Key requirements include:
- Measurement range: 0.3-19.9 FPS with 0.1 FPS accuracy
- LCD display with glare/UV protection
- Integrated lithium battery (5-year lifespan)
- Operating temperature range: -20°C to 70°C
- Complete set with padded carrying case

Please provide product brochure, compliance certification, and quotation. Alternative solutions meeting these specifications will be considered.

Require 2 meters of white soft felt with 1-meter width for steam ironing table application. Simultaneously need 2 meters of open-cell silicone foam for the same steam ironing purpose. Both materials must withstand heat press temperatures. Delivery required within one week.

We require 25 meters of specialized insulation material for immediate replacement. The product must meet these specifications:  
- Density: 9±1.5 kg/m³ (light grey color)  
- Thermal conductivity: 0.0322 W/m·K at 10°C  
- Withstand temperatures from -30°C to 200°C (peak)  
- Compression resistance >9 kPa and tensile strength >120 kPa  
- Aluminum film composite with fire-resistant coating  
- Must include acrylic adhesive on polyester mesh  
Critical requirement: Full compliance with EN ISO 2578 temperature standards and dimensional stability in humid conditions. Urgent delivery within 1 week.

We require 18,000 pieces of DN15mm plastic coupling seals with integrated security locks for water flow meters in blue color. The product must feature anti-tampering protection functionality.  

Each half of the seal needs engraving on the top side. Please confirm your capability to provide laser engraving service for this customization.  

Kindly provide detailed specifications and quality certifications for the seals. Indicate production lead time and packaging details for bulk shipment.

We are seeking LED lighting solutions for home, industrial, and commercial applications. Require detailed specifications of LED strips including wattage, lumens per meter, color temperature, waterproof rating, and control options. Smart controllers must support Wi-Fi/Bluetooth with Alexa/Google integration.  

Products must hold CE/UKCA/RoHS certifications for UK market compliance. Please specify MOQ, pricing per meter/unit, and lead times for both samples and bulk orders.  

Shipping options to the UK and sample availability for quality testing are essential before finalizing any bulk purchase.

We need to purchase 25,000 meters of PVC edge banding for laser edge banding machines. Required specifications: 22mm width x 1mm thickness. Prefer FOB terms with bank transfer payment. Please provide competitive pricing and delivery timeline details.

We are seeking equivalent/alternative options for these fiber optic components:
1. Fibre Optic Power Meter (1 unit)
2. 635nm Fabry-Perot Benchtop Laser Source with FC/PC connector (1 unit)
3. Single Mode Patch Cable with pure silica core fiber (400-680nm wavelength range, FC/PC connector, 1m length, 900µm jacket) - 1 unit
4. Fixed Focus Collimation Packages - 1 unit
Please provide compatible solutions meeting these specifications. No used/refurbished units.

Product Required:  
- Laser Distance Meter  
- Laser Rangefinder Sensor Module  
- OEM Part No.: SW-LDS50A  

Specifications:  
• RS485 communication interface  
• 50 meters measurement range  
• 12VDC power supply  

Quantity:  
• 1 piece (sample order)  

Additional Requirements:  
• Prefer OEM/ODM service providers  
• Please provide technical specifications sheet  
• Include lead time for sample production  

This is an initial inquiry for product testing and evaluation. Suppliers with expertise in laser measurement instruments are preferred.

Need a braided stretch elastic material in three colors. Customer requires the ability to digitally print or laser print logo directly on the braided material. Need to know if you have the capability to execute this printing requirement for a substantial order in meters.

We're looking for a professional reliable supplier on the following: 1. Fish Tank Water Heating Unit - Required water heating temperature: from 17°C to 20°C. 2. Complete Fish Feed Production Line - Production capacity: 0.5 tons per hour. 3. Solar Power System (without batteries) - Current site power consumption: 600 × 380 = 228,000 watts - Required suitable power capacity: 500,000 kilowatts. 4. Closed or Open Circular Fish Tanks (Initial Quantity) - Diameter: 20 meters - Thickness: 1.5 mm - Height: 1.5 meters - Includes accessories (plastic cover, drainage system). 5. Plastic Cover (for large fish ponds) - Suitable thickness: 300–500 microns. 6. RAS (Recirculating Aquaculture System) - Annual capacity: 120 tons. Please send an official quote and include your company's credibilities, certifications, and previous projects accomplished such as images and videos, etc., detailed equipment list with model names and layout.

I am interested in the temperature speed sensor anemometer wind speed meter. I intend to use it for measuring the wind speed of exhaust air from a cooling tower. The exhaust air is not pure; it may contain dust, water vapor, and traces of chemical water treatment. The sensor would be installed in a horizontal orientation. Confirm whether the product is suitable for this type of application. Provide detailed product specifications, including materials used, protection rating, operating temperature and humidity range, output signal type.

Need a quotation for heat detector. Quantity: 1 Unit. Installation Location: Gas Metering Station. Supply: 24 VDC. Operating Temperature: 180 deg C. Output Signal: Relay (Normally Closed/Opened). Approval: EEEx ‘I’ or EEx’d’

Hello, please send us your best offer for a HOSPITAL WASTE INCINERATOR conforming to these technical specifications Features Complete combustion at temperatures above 1000 °C Safe destruction of all pathogens Incineration rate of 5 to 20 kg of waste per hour, low fuel consumption Flame retardant lining for temperatures up to 1250 °C Modular design for easy on-site transport and assembly Incinerates up to 8 cubic feet (.22 cubic meters) per load, 330lbs (150kg) per day Ready to use upon delivery Minimal training Easy to operate with state-of-the-art controls Automatic, pre-set cycle control for startup and shutdown Dual chamber combustion and high exhaust temperatures in excess of 1000°C Thermostatic temperature control for efficient fuel consumption On board 40-gallon fuel tank Manufactured in ISO 9001:2008 certified facility Temperature measurement while cycling. Capacity: 10-15 of waste per hour Weight: 907Kg (approximately 2000lbs) External Dimensions: WxDxH= 730x 900x1300mm Size main chamber: WxDxH=430x330x700mm Chimney Height: approx. 6 m above incinerator Temperature resistance of lining: 1250°C Electrical: 230v 50Hz Fuel: Diesel 10-20 KW, 2-3l/h After sales service: Yes, installation and start-up. Present a catalog: Yes, Request Warranty: 3 years Transport: Transportable by air on standard EURO pallet As well as its transport costs from your home to the port of Lomé in Togo

Looking for oil-resistant rubber hose, specifically suction and discharge type, suitable for use in marine environments for the transfer of petroleum products (diesel). Specifications: Type: Suction and discharge hose (reinforced for negative and positive pressure), Inner Diameter: 150 mm (6 inches), Working Pressure: Minimum 20 bar, Length Required: Total 350 meters (can be delivered in standard segments), Temperature Range: From -40°C to 40°C, Outer Layer: Abrasion-, saltwater-, and UV-resistant, Application: Marine (floating or fixed) hose for petroleum handling

Seeking a reliable supplier for flexible gas pipes with specific specifications: fluid - dry natural gas, outer diameter - 18 inches, length - 1 to 3 meters suitable for 90 - degree routing, design temperature range - - 40°C to 80°C, pressure rating - MAOP 95.5 barg, standards - API, DNV, ISO, ASME, installation - above ground, flange type - ANSI B16.5 Class 600 WN RF, quantity - 15 - 20 pieces, inspection - third - party inspection required, delivery location - Ankara, Turkey. Please provide best quotation, technical datasheets, lead time, and certifications.

Inquiry for ECTFE film for use in a molding EMC coating process (anti - current purpose). Required film: ECTFE film (equivalent to TBM series, 70μm thickness). Usage size: 228mm width × 260 meters length × 0.07mm thickness. Monthly usage: 100 rolls (RL). Processing conditions: The film is pressed between upper and lower metal plates heated at 175°C each, actual temperature reaching around 200°C. Ask for available specifications, lead time, and MOQ.

Ask if the company can manufacture an enameling furnace with the following specifications: a continuous, electric tunnel furnace with a high - temperature - resistant mesh conveyor belt; furnace opening height 600 mm, width 1000 mm; operating temperature 845 °C; part stay time at operating temperature 180 seconds; common part dimensions: height 350 mm, width 450 mm, depth 450 mm; parts to be enameled weigh 6 kg. Consider a furnace with a total length of 11 meters (4 meters for preheating, 3 meters for 845 °C zone, 4 meters for cooling zone), and there must be a temperature transition from the cooling zone to the preheating zone. The final length depends on achievable parameters, and the most important requirement is that parts remain at 845 °C for 180 seconds.

Inquiry about OEM laser EDM (Electronic Distance Measurement) module suitable for integration into a new total station instrument. 

Measurement type: Laser distance measurement (reflectorless and with prism) Reflectorless range: 200–500 meters (minimum) Accuracy: ±2 mm   2 ppm (or better) Interface: Preferably digital (RS232, USB, or similar) Power supply: Please specify voltage and consumption

RFQ: Flow Meter 1 unit - Electromagnetic Flow Meter    Model Code: KDLD    Factor: 0.8675    Liner: PTFE    Electrode: 316L3    Size: 50    Power Supply: 220 Vac/dc    Pressure: 25 mpa    Working Temperature: 120°C

RFQ: Electromagnetic Flow meter Model Code: KDLD Factor: 0.8675 Liner: PTFE Electrode: 316L3 Size: 50 Power Supply: 220 Vac/dc Pressure: 25 Mpa Working Temperature: 120°C

We are looking to procure adhesive materials with the following specifications: Product: Double Coated Tissue Tape Material: Non-Woven Tissue Tape coated with strong adhesive on both sides Adhesive Type: Acrylic base adhesive with excellent temperature and solvent resistance, no slippage after application Total Thickness: ~90 microns Tensile Strength: 2Kg/25mm Adhesive Strength: 1200 Gram/25mm Liner: White Dimensions: 1240mm x 1000 meters Required Quantity: Approximately 20 to 100 rolls Please provide us with your best quotation for the above specifications, including lead time, payment terms, and shipping details. Additionally, we would appreciate it if you could send us free samples for evaluation. Looking forward to your prompt response.

Good Morning, I am looking for LED construction tape 50 meters 1,000 lumens per meter - 4000K 220/240V and also in 24V Features : o Type: High Voltage Construction Tape o Use: exterior lighting o Color: transparent o Power: 8.5 W/m o Luminous flux: 1000 lumens per meter o Yield: 117 LM/W o Connection: 220/240V 8A 50-60hz (2x0.75mm²) direct via CE type socket o With 6A CE 2X0.75MM2 power cable with internal junction to power up to 100m of ribbon. o With a wire tip to ensure the tightness of the tape o Broadcast angle: 160° o Color temperature: 4000K o Average lifespan: 30,000 hours at 25°C o LED type: SMD5050 o Type of diffuser/reflector: transparent o Mounting type: surface, wall, floor o Driver type: CE o CRI: 73 o Security: IP65 IK04 o Electrical class (EN 61140): II o Operating temperature: -25° to  50° C o Dimensions: H9 x L50000 x L15 mm o Weight: 5 kg While waiting for your return, Have a good day,

Dear, We would like to get preliminary information. Product: Automatic Rotary Furnace Casting with  Conveyor Mould Machine.(Aluminum and Copper melting )If your side answers 100% of our questions ,then we can  understand the  details and can move to the next step.....etc.!! 1-- Power consumption:If the Automatic Rotary Furnace Casting with  Conveyor Mould Machine Line works at full power .!! Then how much KW electricity consumes it in 1 hour.jQuery1113010601492338436969_1737159152141ANSWER:  2-- How many Tons of aluminum ingot goods  Capacity can produce 1 hour.? ( if one piece of aluminum ingot 10 Kg.)ANSWER:  3-- How long can the whole machine system work without stopping?ANSWER: 4-- What are the ingots min. -max. SIZE of the ingot mold.? ANSWER: 5-What are the ingots min. - max. Kg  of the ingot mold? ANSWER: 6-- Is the Liquid separation system Automatic?? ANSWER: 7-- Ingot casting Running speed i,is it adjustable?IF YES, please write ,How far does the meter go per minute?ANSWER:  8.How many tons of ingots goods can be cast per hour.? (example id the ingot mould 10 KG.!) ANSWER:9-- How much is the EXW PRICE for 1 SET Automatic Rotary Furnace Casting with  Conveyor Mould Machine Line.?(Remark 100% Clear what is include price -whats NOT.!!ANSWER: Please write from the whole Automatic Rotary Furnace Casting and  Conveyor Mould Machine Line the Size / dimension .....etc.Please send full specification information to us with a drawing,pictures and  Technical data sheet.!Like  Max melting temperature,Recycling rate as TON ,whole weight 1 SET, Which Induction Furnace type,Which Furnace tilting,what kind of scrap can melt and casting,Melting time/speed .?....,what the Input voltage.?, can it work also 220VAC.?..., is it easy to operation...?..,And please also send new fresh  true pictures and videos to us  from the whole system.Please also remake delivery time for this kind of system! And how do you make Loading.?Can you the whole system 1 SET 20 feet container or how do I send it.?? Not: At the beginning four our aim ,need a system line  it cam made 2-5 ton per hour ingot goods !Later we will see what happened and  Is it necessary to increase capacity tons?