Inspection System Machine

I wanted to know if I could have a semi-automatic machine for blowing plastic cans with a 48mm nozzle along with the air system, i.e. compressor, air tank, filters and cooler. I want a semi-automatic machine to blow plastic bottles 5 liters

I want a small system to make prestressed concrete elements. The following equipment is needed: 1. A batch concrete mixer with diesel engine, a batch mixing system with 0.50 - 1 cubic meter capacity and dosing system with 3 hoppers for cement, gravel and sand. 2. A concrete mix transferring equipment from the mixer to the extruding machine. 3. A prestressed concrete extruding machine with diesel engine, capable of prestressing and extruding 400H x 400W concrete elements like post - prestressed (400 x 400 x up to 6500mm L) and U - prestressed (400mm W x 400mm H with 2 female anchoring channels). 4. A prestressed hollow concrete extruding machine with diesel engine, capable of prestressing and extruding hollow wall panel and floor.

I want to buy 1. Machine weld mesh 2. Machine hot dip galvanized line system for weld mesh width 100 - 120cm with total length 30 - 50 meter

We are preparing a bid for a government tender and request your most competitive per - unit price for the seal and Valve Blockers and Unblockers. 450 x 3/4" Valve Blockers (non - corrosive material); 20 x 3/4" Magnetic Valve Unblockers (universal, adaptable); 50 x 5/4" Valve Blockers (non - corrosive material); [Quantity not specified] x 5/4" Valve Unblockers (non - corrosive material). Technical Specifications: Material: Cast or CNC machined aluminum with high mechanical properties. Steel arch closing part. Surface Treatment: Powder coated for corrosion and weather resistance. Dimensions: Overall Width: 97.20 mm, Maximum Height: 88.20 mm, Semi - circular Opening Diameter: 40 mm (Ø20 mm). Operation: Magnetic key opening and closing. Color: Preferably blue or equivalent. Please also provide a representative sample for physical inspection to ensure conformance.

I would like to know if you can offer me a hydraulic press (pressure 50 - 100 tons) for crimping stainless steel ends for fitness machines and for a railing system with stainless steel cables. It should be a compact machine designed for fast work, if possible with a CNC controller for recording the parameters of the crimped ends. The noise level of the hydraulic unit must be very quiet. Companies producing cables for fitness machines use four diameters of nylon - coated cables P11 (P12) fi for cables without nylon - 2.4 mm, 3.2 mm, 4.0 mm, 4.8 mm. There are several dozen different stainless steel ends that are used in OEM cables as replacements in strength machines from several hundred companies. I'm also interested in purchasing dies adapted to the ends.

Our company works with import, consultation and sale of materials and elements for roads. I am interested in purchasing manholes and road gratings and would like to be informed about your production. The manholes and grates must be made of Nodular Cast Iron Production EN GJS 500 - 7, meet and have a certificate of Standard SIST EN 124 - 2: 2015, Load class D 400 or E 600, Standard SIST EN 1433, Standard ISO 9001 od 2015. The manholes must have a free - standing cover with a 120º slope during inspection and a safety limiter against the cover falling 90º, have a profiled channel and an EPDM rubber insert for noise attenuation, have a cover locking system or a screw system for screwing the cover, be protected from corrosion with ecological black paint on water - based, and can be with or without ventilation openings.

We are looking for tamper - proof UHF RFID tags that work in the 868–900 MHz range. These tags will be placed on metal surfaces like fuel tank caps and will be used in vehicle fuel systems to store and send data such as license plate numbers. Requirements: Frequency: 868–900 MHz (UHF, EPC Class 1 Gen 2 / ISO 18000 - 6C). (Tamper Proof) The tag must stop working or be destroyed if someone tries to remove it. Must work well when mounted on metal surfaces. Must have at least 450 bits of memory that we can read and write. Must be resistant to outdoor conditions (sun, rain, dust). Must handle vibrations and impacts (used on heavy vehicles and machines). Around 30–50 mm in diameter. A low profile is preferred. Can be attached with adhesive, screws, or rivets. It must be firm and permanent. High read sensitivity (better than - 18 dBm). EPC memory of 96 bits or more. Temperature range: - 40°C to +85°C. IP67 or IP68 protection class.

I want to inquire about your product: Mini Spray On Chrome System Machine spray chrome machine. Can you send me a quote on your product?

I am interested to build a timber dryer machine with heat pump heating system with Aluminum prefabricated chamber. My chamber dimension should be around 7.2m x 7.2m x 5.2m

We have a request for centerless lathe. Could you please send me a quotation according to technical parameters? Please specify the price FOB. Technical parameters: 1. Raw bar diameter: 8 to 32mm; 2. Bar length: ≤ 3000mm; 3. Bar material: D16T, AMg3; 4. Machining accuracy: ≤ h9 tolerance; 5. Surface roughness: ≤ Ra 1.6μm; 6. Surface ovality: ≤ 0.05mm; 7. Surface straightness: ≤ 1%; 8. Spindle rotation speed: ≥ 2000rpm; 9. Feed rate: ≥ 0.5m/min; 10. Motor power: ≥ 30kW; 11. Machine maximum length: ≤ 10,000mm; 12. CNC system (Russian interface): Fanuc 0i; 13. Standard accessories: Included; 14. Additional accessories: Included; 15. Russian - language user manual: Included

Procure laser soldering systems for the manufacturing of electronic component housings for a solar system application. Require 336 laser soldering units to be integrated with six - axis robotic arms. Power rating: 100W, design: slim body, automated solder feeder. Ask if the soldering machines are suitable for this application and can be integrated with six - axis robot, and request technical recommendation and product details.

Cooling cocoa liquor (80–90°C) to 30–31°C, 2.5–3 tons/hr. Chiller to machine: approx. 50m. Target water temp: 5°C. Require air-cooled system.

Looking for a batch unit machine with a volume of about 3 litres of eau acidic and alkaline water. Want to know if the seller produces such systems and if there are Chinese manufacturers like the biontech btm3000 working with a constant volume preparation.

Applicable for cutting all kind of fiber glass/reinforced composites. Production capacity: 20 - 25 Kg/hour, Blade/cutter: stainless Steel, Cutting size: 3 - 25mm (adjustable), Cutting Feed Thickness: 5 - 50mm, Digital Control System, High Quality low noise motor, Power requirements: 220 AC @ 50/60Hz. Other requirements: a. Power cable, b. Operational/service manual, c. After sale support certificates, d. All other accessories. Replaceable Spare Blade: 1 Set. One year parts and three year machine tool warranty

Inquiry about Automatic Bowl Feeding Filling Machine, Vibratory Feeder,Cap Feeder

interested to buy cylinder testing hydraulic and immersed in water system and cylinder cleaning and painting machine, need complete cylinder testing equipments to jeddah saudi arabia

How much is nc63 pipe bending machine å·²å¤„理

Plan to establish a production line for Brushless DC (BLDC) motors for drone propulsion, power range from 200W to 10kW. Request expert advice on equipment and machines required for full - scale production and look forward to working with suppliers who can support high - performance and reliable BLDC motor production for UAV systems.

Inquiry about composite strap makeing machine

Plan to set up a stone - coated roof tile production facility , Looking to purchase essential core machines for production. Request best quotation (EXW or CIF UAE if possible) for: 1. Roll Forming Machine with Cutting Part; 2. Glue Spraying Machine; 3. Granule Spraying Machine; 4. Drying Oven/Furnace; 5. Top Coating Machine; 6. 2 different molds; 7. Control Panel/PLC System if not included with machines; 8. Installation

Inquiry about automatic 3-layer children’s face mask machine

Production capacity: 20,000–30,000 masks per day- Fully automatic operation (no manual intervention)- Fully servo motor system (no pneumatic systems)- Compatible with pre-printed spunbond fabric (no mold changing required)- Stable and high-speed production (minimum 80–100 pcs/min)- CE/ISO certification preferred- Reliable long-term performance

Inquiry about  Fabric Inspection Machine

Hello
Tofu Machine ,Soy Milk Machine ,Tofu Cutting and Casing Machine ,Tofu Pressing Machine

Inquiry about Dispenser Paper Making Machine