We are establishing a microbiology laboratory and require high-quality equipment to initiate our operations. Specifically, we need thermostatic cell incubators and autoclaves that meet standard laboratory requirements.  
Please confirm if your CO2 incubators can maintain stable temperature and humidity control for bacterial culture. For the autoclaves, specify the chamber capacity and sterilization cycle duration.  
Indicate whether these items are available in stock or require production lead time. Include basic technical specifications and compliance certifications with your response.

Urgently require laboratory equipment with specifications:
1. Climatic Chamber - 120L capacity, -20°C to 60°C temperature range, 20%-95% humidity control, 220V
2. Laboratory Oven - 250L capacity, 200°C max temperature, PID control system, stainless steel interior
3. Sieve Shaker - Digital timer up to 99 minutes, compatible with 200-300mm sieves
4. Concrete Sieve Set - 200mm diameter, 10 stainless steel sieves (31.5mm to 0.063mm)
5. Programmable Mortar Mixer - 5L capacity with automatic operation

Immediate delivery or 2-3 weeks timeline required. Provide technical specifications and commercial offer.

We require 25 meters of specialized insulation material for immediate replacement. The product must meet these specifications:  
- Density: 9±1.5 kg/m3 (light grey color)  
- Thermal conductivity: 0.0322 W/m·K at 10°C  
- Withstand temperatures from -30°C to 200°C (peak)  
- Compression resistance >9 kPa and tensile strength >120 kPa  
- Aluminum film composite with fire-resistant coating  
- Must include acrylic adhesive on polyester mesh  
Critical requirement: Full compliance with EN ISO 2578 temperature standards and dimensional stability in humid conditions. Urgent delivery within 1 week.

We require complete cold storage plant machinery systems with following specifications:

For 500 MT Capacity:
- Total capacity: 500 metric tons
- 4 storage rooms (125 MT each)
- 2 condensing units per room (outdoor type)
- Temperature maintenance at 2°C
- Humidity control 85-90%
- 380V/3-phase/50Hz power supply

For 3000 MT Capacity:
- Total capacity: 3000 metric tons
- 10 storage rooms (sizes to be finalized with engineering team)
- Same electrical specifications as above

Technical requirements:
- Compressor units must originate from Europe/America
- Fully automated operating system with computer data connectivity
- Separate quotations required for both Freon and Ammonia systems
- Design drawings must accompany quotation

Please provide detailed technical specifications, system design proposals and competitive pricing. All documentation should be included in your formal quotation.

Require disappearing black ink compatible with Canon printers.  
The ink must completely vanish within maximum 2-3 days under normal conditions (1-2 days preferred), with environmental factors like temperature/humidity/sunlight potentially accelerating fading process.  

Need shipping to Alès 30100, France.  
Confirmed requirement for 2 liters quantity.  
Seeking all available transportation methods with corresponding delivery timelines.  

Supplier must provide clear technical specifications regarding ink's performance characteristics and environmental compatibility.

We are seeking DC environment monitoring systems for data center applications. Please provide:  
1. Technical specifications including monitoring parameters (temperature/humidity/power etc.)  
2. Compatibility details with existing DC infrastructure  
3. Minimum Order Quantity (MOQ)  
4. Unit price and bulk discount rates  
5. Standard lead time for shipment  
Suppliers with relevant certifications (ISO, CE) preferred.

We are looking to purchase the Prosens QM-211-00-0 temperature and humidity sensor.  
Key requirements:  
- Product model: QM-211-00-0  
- Quantity: 1 unit  
Please provide:  
1. Technical specifications  
2. MOQ for future orders  
3. Unit price  
4. Lead time  
Looking for reliable suppliers with experience in environmental monitoring equipment.

I want to buy 5 humidity controller and 5 Temperature controller SSTP320T and STP 322-6

I am looking for OTDR with following specifications: Screen ≥ 7 - inch digital LED LCD, Battery At least 12 hours of operation, Eco Mode Auto Power Off, Storage Capacity ≥ 16 GB, Interfaces RJ45 port and USB ports, Operating Temperature - 10oC to 50oC, Storage Temperature - 20oC to 75oC, Operating Mode Manual, Automatic, Humidity Rate ≤ 95%, Languages English and Portuguese, Accessories AC Adapter, Lithium - ion Battery, SC Connector Adapter, USB Cable, User Guide, Installation Disk, Bag, Wrist Strap, Single - mode Pulse Width 100m, 500m, 2km, 5km, 10km, 20km, 40km, 80km, 120km, 160km, 240km, Multi - mode Pulse Width 500m, 2km, 5km, 10km, 20km, 40km, Resolution 0.01m, Tension Test 1.8 - 2.2N, Measurement Units KM, Miles, Test Modes Visual Fault Locator: visible red light for fiber identification and troubleshooting, stabilized light source, Event Analysis Automatic or manual operation, displayed in table format, Additional Functions Check for communication light in optical fiber and include a light emitter for testing, Live Fiber Detection Detects presence of communication light in optical fiber. Please send to me a quote and datasheet of your best product.

Do you have window protection film similar to 3M AG4 and AG6? 1 sample, max production will be 250000Square feet as predicting. as soon as possible, but we have requirement for the spec of the film. Application Temperature (Celsius): 5 °C; Application Temperature (Fahrenheit): 40 null; Applications: Scratch Resistance, Graffiti Resistance; Film Thickness (Imperial): 4 Milli - inch (mil), 6 Milli - inch (mil); Film Thickness (Metric): 0.102 mm, 0.152 mm; Interior/Exterior: Interior; Product Usage: Windows; Substrate: Glass; Visible Light Transmittance: 70 %

I am interested in the temperature speed sensor anemometer wind speed meter. I intend to use it for measuring the wind speed of exhaust air from a cooling tower. The exhaust air is not pure; it may contain dust, water vapor, and traces of chemical water treatment. The sensor would be installed in a horizontal orientation. Confirm whether the product is suitable for this type of application. Provide detailed product specifications, including materials used, protection rating, operating temperature and humidity range, output signal type.

We are interested in obtaining a quotation for the following products: 1. Ozone Scrubber; 2. Ozone Analyzer UV Mercury Lamp Assembly; 3. O3 Flow Pressure Assembly; 4. PT 100 Temperature Sensor; 5. Pressure Sensor; 6. Temperature and Humidity Kit. Kindly provide us with your best pricing, minimum order quantities, lead time, payment terms, and shipping options. If possible, please also include product specifications or brochures for our reference.

We are planning to procure a Thermal Oil Boiler for our project and request your best quotation based on the attached datasheet and the following key specifications: Type: Thermal Oil Boiler, Horizontal; Service: Intermittent; Capacity: 1,200 Mcal/hr (5,040 MJ/hr); Fuel: Heavy Fuel Oil (HFO); Fuel Firing System: Pressure Jet, Monobloc burner (SAACKE brand or equivalent); Control System: Programmable Logic Control (PLC); Boiler Pumps: 2 units (1 Duty, 1 Standby) – IE3 motor standard; Oil Tank: Elevated, manually filled atmospheric day tank with capacity sufficient for at least 6 hours of boiler operation; Site Conditions: Altitude 12 m ASL; Max. Ambient Temperature 31.6 °C; Humidity up to 83% (tropical wet)

Looking for Data logger , for temperature and humidity. 

Inquiry About Environmental temperature and humidity loggers weather station

Inquiry About YK-301/SF-474 incubator temperature control humidity/temperature humidity 

Could you please provide the quotation for me? 1. Pressure Transmitter GS4200-0010AB Range : 0 - 10 Bar Output          : 4 - 20 mA , 2 wire Accuracy : ± 0.25% FSO Adjustment : ± 10% FSO Zero and Span Connection : 1/4'' BSP Male , Stainless Steel Ambient Temperature : -40 to 85 C Supply Voltage : 13 - 36 V DC Electrical Connection: DIN Plug Socket to DIN43650 Enclosure Rating : IP65 QTY 2 EA 2. Low Pressure Transmitter LP1003-500AB Range : 0 - 500 mBar Output : 4 - 20 mA , 2 wire Accuracy : ± 0.5% of span BFSL Supply Voltage: 13 - 36 VDC Operating Temperature: -20 to   85 °C Pressure Connection: 1/4" BSP Male QTY 1 EA 3. Pressure Transmitter GS4200-0001AB Range: 0 - 1 Bar Output: 4 - 20 mA , 2 wire Accuracy: ± 0.1% FSO Adjustment: ± 10% FSO Zero and Span Connection: 1/4'' BSP Male , Stainless Steel Ambient Temperature: -40 to 85 C Supply Voltage: 13 - 36 V DC Electrical Connection: DIN Plug Socket to DIN43650 Enclosure Rating: IP65 QTY 1 EA

humidity sensors, temperature sensor, water flowsensors

Inquiry about Pressure transmitter, temperature transmitter, Differential pressure transmitter, H2S sensor, Gas detector and RTU.

i am interested to purchase incubator parts Thermostat Humidity Control  Egg Turners  Temperature Sensor Display/Control Panel etc 

Subiect: Inquiry Regarding Hemp Fiber Extraction Machinery, I hope this message finds you well. I am writing to inquire about the hemp fiber extraction machinery you offer, specifically the model ZGM-4401/ZGM-4402/ZGM-4403, as it appears to be suitable for our production needs. We are looking to establish a manufacturing process for hemp-based insulation panels, and this equipment could be a critical part of our operation. Could you kindly provide the following details regarding the machine: Capacity: The machine's capacity of 1-2 tons per hour seems promising. Could you confirm if this is suitable for our production needs of approximately 10,000-15,000 panels per week? Customization: We may have specific requirements for the voltage and power options. Can this machine be customized to meet specific requirements? After-Sales Service: We would like to know more about your after-sales service and warranty, particularly regarding installation, maintenance, and support.
Details of the production flow for hemp insulation panels: 1. Hemp Processing (Initial Treatment): o Hemp Decortication – Equipment for extracting fibers from hemp stalks (hemp decorticator). Please include information on the hourly processing capacity. o Hemp Milling – Equipment for milling hemp fibers into a fine material that can be used for panel production (hemp milling machine). 2. Mixing and Conditioning: o Fiber and Binder Mixing – Equipment for mixing hemp fibers with binders or resins to improve adhesion and performance of the material. o Material Conditioning – Equipment for controlling the humidity and temperature of the material to ensure optimal conditions for pressing. 3. Pressing the Material: o Hot Press – Equipment for pressing hemp fibers and forming the insulation panels. Please specify the capacity and maximum dimensions of the panels that can be processed. 4. Cutting and Sanding the Panels: o Cutting Machine – Equipment for cutting the panels to standard dimension

I want a  Air Temperature Humidity Sensor  Please Give me Price Product : Air Temperature Humidity Sensor Brand : Model :  XZC2-2G Part Number:  41372-S Serial no:  14073 

 Can i get price quotation of WTS 800 Sensor Integrated (Air temperature,Air humidity,air pressure,wind direction,wind speed,rainfall,radiation,UV index) sensor RS485 ( Include Connector

Dear Sir or Madam, please send us a quotation for the following items. 5x TEMPERATURE INDICATOR THV100S Please also tell us possible additional costs and the current delivery time.