Require air and water nozzles (atomizers) with operating liquid pressure of 200 PSI and flow rate of 2 L/min. Need technical specifications and product catalogs for evaluation. Please confirm availability and provide detailed product documentation.

We need gas mixers for integration into a gas sensor testing system. The equipment must generate precise concentrations of hazardous gases (H?S, NO, CO, ethanol) ranging from ppb to ppm levels.  

Key requirements:  
- Minimum two gas inlets (target gas + ambient/dry air)  
- Programmable control of flow rates and concentrations  
- High mixing accuracy with stable output  
- Compatibility with Winsensor WS30 test chamber  

Required quantity: 2 units.  
Additional gas inlet options would be advantageous but not mandatory.

We require explosion proof motor compatible with high pressure pump applications.  
Key specifications required:  
- Flow rate capacity: 18m3/hr  
- Pressure range: 20-22 bar  
Must meet explosion-proof certification standards for safe operation in hazardous environments.  
Please provide technical specifications and compliance documentation.

I need an explosion proof motor compatible with high pressure pump specifications:  
- Flow rate: 18m3/hr  
- Operating pressure: 20-22 bar  

Please specify available voltage options and corresponding technical details for motors meeting these requirements.  
Certifications for explosive atmospheres (such as ATEX or IECEx) are required.  

I need high- and low-pressure water spray nozzles for indoor applications in hot, humid environments (UAE). The system requires durable, corrosion-resistant solutions with easy maintenance.

High-pressure nozzles specifications:
- Pressure range: 200-350 bar
- Material: Stainless steel or ceramic tip
- Spray angles: 0°, 15°, 25°, 40° (fan/jet type)
- Thread connections: 1/4" or 1/2" BSP/NPT

Low-pressure nozzles requirements:
- Wider orifices for low-pressure operation
- Chemical-resistant construction
- Adjustable or fan spray patterns

Please provide:
1. Technical datasheets with pressure/flow specifications
2. Pricing including MOQ and volume discounts
3. Customization capabilities
4. Production lead times and UAE export documentation

We require spray dryer nozzles for industrial applications. Please provide technical specifications and product datasheets for evaluation. Material compatibility and flow rate parameters are essential for our selection process. Manufacturers with relevant certifications are preferred.

We need to purchase a stainless steel vapor blast cabinet with dimensions approximately 1370mm(W) x 1950mm(H) x 1070mm(D). The unit must include:
1. Internal lighting system
2. Extraction/filtration system
3. Window cleaning mechanism (wiper or air flow)

Cabinet-only supply required (no blasting gun/nozzle/pump needed). Optional transport table attachment preferred.

Please provide:
- Unit price with shipping cost to Valencia, Spain
- Production lead time
- Payment terms

Immediate order placement upon agreement.

We are looking for high flow fuel pumps specifically designed for racing cars. The pump must deliver reliable performance under extreme conditions. Please provide product specifications and company certifications. Suppliers with motorsport industry experience are preferred.

Looking for reliable suppliers of cutting nozzles for industrial metal cutting applications. Require high-quality products with good durability. Please provide specifications and competitive pricing.

Require a custom-built misting system with below specifications:

Dual-Liquid Dosing:
- Two separate 5-20L concentrate tanks
- Automatic proportional mixing (1-2% per liquid)
- Integrated with main water line

Pump Requirements:
- Stainless steel plunger pump
- 50-70 bar pressure capacity
- Flow rates: 1L/min (20 nozzles), 3L/min (60 nozzles), 12-15L/min (300 nozzles)

Nozzle Specifications:
- Stainless steel/brass construction
- 3-10μm droplet size
- Anti-drip function

Control System:
- Digital/PLC controller with dosing ratio adjustment
- Programmable misting intervals and cycles
- Optional remote/app control

Compact design preferred (≤50cm x 60cm). Pre-filtration system required to prevent nozzle blockage.}

Require 5-6 PCS RGB underwater lamps with 1" or 1 1/2" hole. Need foam type nozzles with 7 m3/hr flow rate capable of 1 meter water spray height. Immediate delivery required to Hangzhou. Both items must be packed in same shipment.

We need to purchase high-pressure spray rings with 60-70cm diameter for cattle cooling systems. Each ring must accommodate 8 nozzles with 10-24 thread specifications.  
Require 5 pumps capable of servicing 14 spray rings per unit. The system will be installed on 90m-long fan rows with 7 rings per row. Please provide compatible equipment solutions and commercial offer.

Inquiry About high standard big flow capacity duplex stainless strainer datos tecnicos del equipo

I am looking to purchase a rock cutting machine with the following technical specifications: it must have simple manual operation with an easy - to - use control panel, an advanced spindle design that ensures long service life and precise cutting, and a welded steel structure suitable for harsh production environments. It should include a large table with T - slots for flexible sample clamping, a channelled coolant drainage system providing high flow rates with minimal debris buildup, and a cam lock screw on the right side. The cutting wheel motor must include a brake and have a power of 5.36 HP (4.0 kW), 230/380/450V, 50/60 Hz, 3 - phase. The cutting wheel dimensions must be: minimum 10x1.25 in. (255x1.5x32 mm), maximum 12x1.25 in. (305x1.5x32 mm), with a constant wheel speed of 2865 RPM. The T - slot table should have dimensions of 13.8 in (350 mm) width and 9.8 in (250 mm) depth, with 7 T - slots of 0.47 in (12 mm) according to DIN 650. The wheel clearance above the table must b

1. LC-Oval Gear Flow Meter 50-Size:50mm(2”) Flow range: 2.4-24m3/hT2- High temp 60-120°C,-Pressure: 1.6MPa BELZ-2- Digital indicator, instant and totalized flow,24V DC. 4-20mA output,2-wire, Explosion proof. Qty:1 E-Material: Cast steel 2. LC-Oval Gear Flow Meter 40-Size:40mm(1-1/2”) Flow range: 1.5-15m3/h-Pressure: 1.6MPa BELZ-2- Digital indicator, instant and totalized flow,24V DC. 4-20mA output,2-wire, Explosion proof. Qty:1 E-Material: Cast steel 3. LC-Oval Gear Flow Meter 25-Size:25mm(1”) Flow range: 0.6-6m3/h -Pressure: 1.6MPa BELZ-2- Digital indicator, instant and totalized flow,24V DC. 4-20mA output,2-wire, Explosion proof. Qty:1 E-Material: Cast steel

We are currently evaluating bottom-fill, heat-seal pouches with a dispenser tip for a ~45 mL gel. Specifications needed: Usable inner volume 45–60 mL, bottom open for manual piston filling, food-grade film PET/AL/PE (or equivalent high barrier), tip/nozzle suitable for squeezing gels by athletes in motion, sealable on impulse or band sealer, MOQ and unit cost for blank and printed versions, lead time (production and shipping to Virginia, USA), sample pack (25–50 pcs) pricing. Optional branding: 2 - color print (dark green and gold/yellow), front area ~2″ × 4″ label zone. Please let me know available stock sizes closest to 50 mL working fill, film specs (thickness, barrier), pricing tiers (1k / 5k / 10k), sample lead time and freight cost.

Request a quotation for Filter High Flow CUNO HF40PP005A01 (1UNIT). Main Part: High Flow Filter. Other specs: 5 Microns. OEM No.: HF40PP005A01. Brand: CUNO. UOM: 1EA = 1PC

We are in urgent need for OEM spare parts for engine SULZER 5ATL25H. Attachment Sleeve (H21415) 4, Cylinder Bushing (H21401) 2, Valve (H27076) 12, Discharge Valve (H55054) 7, Piston Ring (H34026) 8, Piston Ring (H34027) 8, Piston Ring (H34028) 8, Rubber Trigger Valve Ring (H27426) 15, O - ring (H27171) 10, O - ring (H55084) 15, O - ring (H27106) 120, O - ring (H40070) 30, O - ring (H55073) 15, O - ring (H55103) 5, O - ring (H40071) 30, O - ring (H27165) 20, O - ring 18.5x3.5 (H27108) 80, VD Sealing Pipe Ring (H87650) 20, Plunger Pair (H55030) 7, Frame bearing (H12020) (typical) 6, Gasket (H27102) 12, Suction manifold gasket (H82409) 10, Spring (H55065) 5, Spring (H27406) 5, Sprayer A - 350 - 27 - 470 - 00x158x10x0,30RXN06 (H27240) 5, Rotocap (H27514) 8, Valve Seat (H27170) 10, High Pressure Tube (H87080) 5, Fuel Supply Tube (H27211) 5, Seal (H82404) 20, Seal (H81830) 20, Nozzle (H27200) 4

Looking for a high - performance 12V DC diaphragm pump with 40–50 liters per minute (10–13 GPM), pressure of 6–8 bar (90–115 PSI), chemical - resistant internals (SH compatible), preferably with a brushless motor and suitable for softwash rinsing use. Ask if there is anything similar to the “Super Pump” from Southeast Softwash (USA). Request full technical specs, flow vs pressure chart, price for 1–5 units, lead time to Sweden, and CE certification info (if available).

We? require high - quality clinoptilolite zeolite to reduce water hardness from 800 mg/L to 300 mg/L (as CaCOa??). Below are our system details for your recommendation: 1. System Parameters Total Flow Rate: 16 - 18 m?3/hr (continuous operation). Raw Water parameters: pH: 8.0 Hardness: 800 - 850 mg/L (Ca?2a?o)

Can you please let me know your price and availability fo the A1290 nozzle.?

Inquiry about compatible equivalent to the Pall High Flow filter cartridge model HFU660GF100H

We are looking for new partners for our business and are interested in purchasing spray heads (aerosol spray actuator) for aerosol cans for spraying silicone lubricants (like WD-40 and analogues). We need ready-made heads with dimensions: 22 mm high and 22 mm in diameter. The head must have a spray nozzle (we are not interested in making molds). We would like to receive an commercial offer for first batch from 3, 4, 5 of your standard boxes of such heads. With detect possible delivery terms to Moscow (Russia). Please specify the number of heads in your standard box and standard time of readiness of the goods for shipment. We look forward to our cooperation!

1. HIGH PRESSURE GAS STOVE HEAD, NOZZLE 36, DIA 14 INCH, Brand : Kingray -qty 2 2. HIGH PRESSURE GAS STOVE HEAD, DIA 8 INCH,