Inquiry About DC motor

Looking for 4 pieces of stepper motor 2H8006T for KSA hHz at the earliest. Ask if there is any equivalent model with adaptor for NBP30 Din Rail Mount, 2 x 12 Volt DC x 1.2Ah Battery Storage Unit for 24VDC Uninterruptible Power Supply (UPS) - 2 Batteries Included, need 4 pieces. 4 weeks lead time

Мотор-редуктор V.T.V  YN90-120  / 90JB-10G15 1 шт Чем раньше, тем лучше.

Inquiry About 63mm Diameter Robotics High Torque DC Gear waterproof electric motor. Brush type for Both motors 22v 2850 rpm. 

1. LC-Oval Gear Flow Meter 50-Size:50mm(2”) Flow range: 2.4-24m3/hT2- High temp 60-120°C,-Pressure: 1.6MPa BELZ-2- Digital indicator, instant and totalized flow,24V DC. 4-20mA output,2-wire, Explosion proof. Qty:1 E-Material: Cast steel 2. LC-Oval Gear Flow Meter 40-Size:40mm(1-1/2”) Flow range: 1.5-15m3/h-Pressure: 1.6MPa BELZ-2- Digital indicator, instant and totalized flow,24V DC. 4-20mA output,2-wire, Explosion proof. Qty:1 E-Material: Cast steel 3. LC-Oval Gear Flow Meter 25-Size:25mm(1”) Flow range: 0.6-6m3/h -Pressure: 1.6MPa BELZ-2- Digital indicator, instant and totalized flow,24V DC. 4-20mA output,2-wire, Explosion proof. Qty:1 E-Material: Cast steel

Мотор-редуктор циклоидальный  - 2 шт. Входная скорость: 1400 об/мин. Передаточное число: 35. Мощность двигателя: 4 кВт. Диаметр выходного вала: 45

I am working on an electric 1 - ton capacity forklift project and would like the following components: 24V DC front drive wheel (motorized driving wheel suitable for 1 - ton forklift), 24V DC hydraulic power unit (for lifting system), handle with controller (throttle buttons for lift/lower/reverse), any controllers (motor/hydraulic) and accessories required for integration. 

How much does this dc motor permanent magnet for Golf Trolley cost with shipping and possibly customs, to be sent to Denmark. It includes both motor and gearbox

I need this motor in 12vdc 25 rpm with a D shaft diameter 12mm and diameter with recess 11mm, lenght of shafy 20 - 22mm. I need one to test. then maybe 100pcs, maybe more

DO YOU SELL FLD5250 MOTOR DC 110 - 150

Need a gear motor model numbers MBW04. One piece

Intend to procure 10 DC Torque Motor, Part No J80LYX001, OEM CETC China for the project/client. Request a discounted proposal and clear the commercial terms in the proposal/quotation. Urgent response is requested.

Ask for quotation of 228 - 35146 plunger seal, 228 - 63621 uv lamp, 228 - 45707 - 91 sus filter (quantity 12 NOs), 228 - 35871 - 96 line filter assy, 228 - 62350 - 41 dc motor assy (4 NOs), 228 - 50391 needle seal housing (4 nos)

Looking for a high - performance 12V DC diaphragm pump with 40–50 liters per minute (10–13 GPM), pressure of 6–8 bar (90–115 PSI), chemical - resistant internals (SH compatible), preferably with a brushless motor and suitable for softwash rinsing use. Ask if there is anything similar to the “Super Pump” from Southeast Softwash (USA). Request full technical specs, flow vs pressure chart, price for 1–5 units, lead time to Sweden, and CE certification info (if available).

I want this motor in Uganda

I need de PMDC motor 80zy22-60 DC 22V 60W. Ref 1900218.?

Looking for RK - 370PH - 5030 specs. DC brushed motor.?

How can I buy motor with gear YN80 - 25 230V 50Hz 25W 0.35 A 2 ?μF 450V 1250 r/min.80JB 40 G 10.

COIL, ELECTRICAL; FUNCTION: TRIP, ELECTRICAL RATING:125 V DC, CONNECTION: CAPTIVE SCREW; FFT:CODE#3Z9G00077G001;ITEM:PC18601P003;CV-5HAL; SIZE:ID:30MM OD:55MM; FOR 4.16KV,1300A MOTOR CONTROLLER,TYPE: I3B1; P/N: F5F9G0176A, MNFR: TOSHIBACORPORATION, MODEL: CS-6P20, SERIAL:T151033-D200-A7; DRAWING: GKKB-359362

We are interested in your product "1218 - N20 miniature cc geared motor with self - locking worm gear 12V dual - axis or single - axis low - speed motor". We would like to have dedicated quotes and information on the purchase methods. Our project plans to purchase thousands and thousands of motors.

We looking trade mill dc motor

DC MOTOR 300 HP 440 VOLTS

We are quoting for ball mill along with its main gear box. We need a quote for ball mill main gear box and auxiliary gear box of following specification. Specification of main gear box and auxiliary gear box is: a?￠ MOTOR RATING a?? 1500 KW a?￠ Main gear box INPUT RPM a?? 985 RPM a?￠ Main gear OUTPUT RPM a?? 109 RPM a?￠ SERVICE FACTOR OF GEAR BOX a?? 2.5 over motor rating a?￠ TYPE OF LUBRICATION SYSTEM a?? FORCED LUBRICATION a?￠ Auxiliary Main gear box INPUT RPM a?? 1500 RPM a?￠ Auxiliary gear OUTPUT RPM a?? 17 RPM a?￠ Type of main gear box input coupling a?? BIDDER TO DECIDE a?￠ Type of MAIN GEAR BOX output coupling a?? BIDDER TO DECIDE a?￠ SCOPE OF SUPPLY a?? BALL MILL GEAR BOX, input coupling and output coupling torsion shaft, ALL SAFETY instruments required for main gear box, FORCED LUBRICATION SYSTEM AND FOUNDATION BOLTS FOR MAIN GEAR BOX