We are looking for gas springs for industrial applications. Please contact us with product specifications and pricing details.

We require three CNG transport units for compressed natural gas delivery from production sites to offloading facilities. Each unit must meet these specifications:  
- Minimum capacity: 5,000–6,000 Nm3 gas  
- GVW ≤40 tons with axle load ≤10 tons  
- Standard fifth-wheel coupling (1250mm height)  
- Maximum length 13.6m (3-axle) or 12m (2-axle)  
- Welded steel frame with anti-corrosion coating  
- Air/leaf spring suspension (≥40t rating)  
- ABS/EBS pneumatic braking system  
- Radial tires (10t/axle capacity) with spare wheel  
Full technical documentation required for compliance verification.

I require foldable/convertible high heels suitable for office wear. Specifications must include:  
- Multiple heel height options (7cm stiletto, block heels, convertible styles)  
- Durable folding mechanisms (hinge, pivot, metal spring systems)  
- Material combinations: leather/PU upper with TPR/rubber outsole  
- Sample evaluation before bulk order commitment  
Please provide quotations with detailed technical specifications and sizing charts.

We require 500 units of each below items for deer feeder systems:  
1. Round scatter plates with spring-loaded mechanism  
2. 12V DC motors specifically designed for animal feeding equipment  
3. Programmable digital timers (6V/12V dual voltage) supporting 4-6 feeding schedules  
4. 12V remote control kits including wiring harness and standard plugs  
All components must be compatible with outdoor wildlife feeding applications.

Require IP65-rated outdoor cable reel mechanism with spring rewind function.  
Specifications:  
- 4 conductor 45Amp 600V collector assembly  
- 1.5" bore size  
- Compatible with 15m length cable  
- Must include cable stop mechanism  

Please provide quotation based on technical compliance. No budget constraints specified.

Looking for reliable suppliers of various mold components including ejector pins, springs, latches, date stamps, gas vents, guide pillars, guide bushings and mold bases. Components must meet standard industrial specifications for precision tooling applications. Please provide product specifications and material certifications.

We are developing a telescopic product requiring custom compression springs. The spring must compress to 30cm length (35mm diameter) and extend to 1.5m length (26mm diameter on final section) with sufficient force to lock the system in extended position. The mechanism will consist of 5-6 telescoping sections. Please advise technical specifications and manufacturing feasibility. Require spring solution that maintains structural integrity through repeated extension/compression cycles. Material selection should prioritize durability and consistent force output.

Seeking replacement door handle compatible with existing lock mechanisms. Required specifications: approximately 85mm total length with 45mm stem. Must feature channel/groove for internal spring and slot for circlip retention. Unable to provide visual documentation - require technical compatibility verification.

We are looking for gas spring components compatible with BMW E70/E71/F15 series vehicles.  
Key requirements:  
1. Part compatibility: Must fit 2014-2018 BMW models  
2. Application: Rear trunk shock strut system  
3. Quality: OEM standard or equivalent  
Please provide:  
- Detailed product specifications  
- MOQ and pricing  
- Production lead time  
- Warranty terms  
Samples required before bulk order.

We are interested in developing a spring-loaded cargo/drying strap product similar to TorkStrap, featuring dynamic tension and easy operation. Ask for information including: 1. Ability to manufacture a spring?loaded strap or mechanism that maintains tension over shifting loads. 2. MOQ and pricing tiers. 3. Materials and specifications: type of webbing, spring mechanism, hook types. 4. Available certifications. 5. Options for OEM branding. 6. Lead times for samples and production. 7. Shipping terms and approximate freight cost estimates to Stockholm. Provide AI sketches and can offer sample details upon request. Want to start with sample production and evaluation quickly.

The seat is locked in one position. The gas spring is leaking oil and the little pin in the middle of the axis is blocked. Need a new gas spring.

Enclosing ref. picture of Steel Ball Stud and Socket for Gas Spring, ask if you can supply Forgings or finished products. Have various sizes and can provide drawings for proper quotes.

Determine which gas spring to replace the Jewell gas spring in a chair

We are currently looking for a reliable supplier for gas springs with the following specifications

I am looking for gas spring screen printing machine

Please provide a commercial offer for the position below: 1) Anchor for eccentric wellhead equipment – 75 pieces Note: Anchor for eccentric wellhead equipment, body material 42 SgMo, die material (crackers) 20 CrMnTi, length of the die (crackers) 150 mm, spring material 60 Si 2 Mn, with connection dimensions 4 1/2" BOX EUE (top) x 3 1/2" PIN EUE (bottom), standard SY/T5112 -2008.      1) The method of landing and release is mechanical; the principle of operation is axial (by axial movements of the pipe column, while the rotation of the tubing is not required) Designed to hold the pump in the casing of a well with an outer diameter of 177.8 mm. The range of internal diameters of the captured pipes- 166;164;161,6; 159,4; 157; 154,8 mm. 2) Warranty period: 2 (two) years from the date of delivery If the items are for production, please specify the production dates. We will be grateful for a prompt response and hop

Inquiry About stainless steel gas spring

We are in requirement of AUTOCLAVE ALONG WITH NITROGEN GENERATOR as per specifications below for which we would like you to quote us your best prices with the best delivery period. Kindly indicate the weight and dimensions and port of shipment in your quotation. The Packing required is export standard sea worthy. AUTOCLAVE ALONG WITH NITROGEN GENERATOR a) Working Diameter = 3.0M b) Working Length = 4.0M c) Verticle (Pit Type) d) Electrical / Steam Heating System on walls (wall mounted) e) Electrical / Steam Heating system should be PLC based f) Temperature Control Accuracy  2oC g) Working Temperature upto 300oC h) Alarm for difference in any specific set value i) Working Pressure = 2.0 MPa j) High Pressure Alarm k) Safety Valves for main body and associated pipings (l) Working Medium Nitrogen Gas m) Cooling mechanism with both water and air (the cooling medium must not come in contract with the internal environment of autoclave) n) Vaccum

QTY. 1 PC LOW VOLTAGE SET OF PARTS, MFR GE, GENERATOR CB, MODEL FKG2S, REF CODE HNS20043193002, GMCB SPARE PARTS QTY. 1 PC SPARE PARTS, OF SPRING MECHANISM, MFR GE, GENERATOR CB, MODEL FKG2S, REF CODE HBKITPDR, GMCB SPARE PARTS

 Now our customer is looking for the Sock Knitting Machines and please check the specification in below. If you are interested , please make an offer to us a CIF Yangon Prices in USD and machine catalogue of your product. 1)Specification of Sock Thick Knitting Machine (a)Product – Full Computerized Sock Thick Knitting Machine with Compressor (750W) and Air Blower (1.5 HP) (b) Model – WLT-6F 828 (c) Cylinder Diameter – 3 ? inch, 108 Needles (d) Maximum Diameter – Plain 350 RPM, Terry 300 RPM (e) Rate Voltage – 380 V/50 HZ or 220V/50 HZ (f) Specification - Double Picker, Higher Efficiency - To Knit Left and Right Socks, 3D Socks, Multilayer Welt, Double Color Heel - Suitable for Thick Socks, Sport Socks, Thin Socks - Voltage Gas Pump Power (1.5 Hp) - Voltage 380-415 V Including (a) Sufficient Technical Supervision while installation commissioning test run and complete training also for warranty period 2 Years. (e) All of grounding and foundation works , construction works and supervision, foundation final inspection, (g) Instruction manual and drawings, electrical and mechanical spare parts catalogues

INquiry for the product \\\\"Lift Up Bed Fittings Gas Spring Strut Mechanism for Bed\\\\"

 Our company is interested in buying following products: Cylinder accumulator with charging unit charging unit, for API 53B mechanical seal system API 53B mechanical seal system, complete. Each accumulator is supplied with a spare parts kit consisting of consisting of: -Elastic cylinder-1pc; -Gas valve assembly-1pc; -Hydraulic valve (port) in assembly-1pc; -Kit of sealing rings for hydraulic accumulator repair-1pc Maximum working pressure: 2600 kPa; Operating temperature: -29 to 75°C; Design temperature: -40 to 400°C (only for metal part); Accumulator volume: 50 liters. Working medium: diesel fuel. Connection thread of the elastic cylinder charging unit: G1/4 or 5/8 BSP. Body material stainless steel. Quantity- 3 set Please give me a quotation.

Single Aluminum Gas Spring Monitor Desk Mount

Please send me more about the product price. Could you kindly provide us with your offer for the blow materials: HVX-12 Breaker Spring charge mechanism and accessories (Drive gear, main shaft, bearing block, release manual operation, lock assembly, spur wheel, cam disc, ...)