We are seeking a 640kVA diesel generator set with the following specifications:

Main parameters:
- Prime power: 570kVA/456kW
- Standby power: 640kVA/512kW
- V-12 turbocharged engine with ≤26.6L displacement
- Fuel consumption: ≤124L/h (100% load), ≤95L/h (75% load), ≤64L/h (50% load)
- System capacities: 59L oil, 120L coolant, 1120L fuel tank

Alternator requirements:
- 400/230V 50Hz 3-phase brushless design
- H-class insulation and IP23 protection
- AVR voltage regulation with ±1% accuracy
- 110% overload capacity for 1 hour

Control panel must include:
- Manual/automatic operation modes
- ATS and automatic load sharing
- Under-frequency protection
- Emergency stop function

Essential configuration:
- Soundproof canopy
- Automatic battery charger
- Fuel tank heater
- Lockable fuel filler cap
- Complete cable set

Please provide technical compliance confirmation with your quotation.

We require fuel filters, oil filters, and air filters compatible with Foton automobiles. Need 200 pieces of each type for initial order. Prefer delivery within 1 month. Please provide detailed specifications and competitive pricing for these automotive filters.

We need two-seater snowmobiles meeting strict technical specifications:
- 4-stroke engine with cylinder volume ≥976/2 cm3 and power ≥72HP
- Liquid cooling system and fuel injection
- Hydraulic disc brake system with CVT transmission (low/high/reverse/neutral)
- Electric starter, heated grips, headlight, and speedometer/odometer
- Fuel tank capacity ≥42L, oil tank ≥2.5L
- Maximum speed ≥110km/h
- Wet sump lubrication with replaceable filter
Please provide technical compliance confirmation with commercial offer.

I am looking to purchase air, oil, and fuel filter papers for automotive applications. Please provide detailed product specifications and any relevant information to proceed with the procurement process.

I need to purchase one set each of throttle body, engine water pump, timing belt, coil packs, spark plugs, oil filter, air filter, alternator, petrol filter, and timing belt kit for mini trucks and vans. Immediate delivery required. Prefer competitive pricing with bank card payment.

We are looking to purchase a range of spare parts for heavy truck maintenance. Required items include piston set, piston ring set, liner, intake valve, exhaust valve, valve guide, valve seal, main bearing, connecting rod bearing, thrust washer, overhauling gasket, oil filter, fuel filter, oil, turbo assembly, fan belt, and oil pump. Please provide pricing and specifications for the listed components.

We are looking to procure the following components for immediate delivery:
1. Fuel Oil Pump
  - Model: TA 3C 4010-6
  - Quantity: 1 unit

2. Regulator Oil Nozzle (Original)
  - Capacity: 225kg/h
  - Configuration: F1, 50 Degree
  - Quantity: 2 units

3. Regulator Oil Nozzle (Original)
  - Capacity: 125kg/h  
  - Configuration: F1, 50 Degree
  - Quantity: 2 units

Delivery Requirement: All items must be shipped within one month. Suppliers please provide:
- Product specifications compliance confirmation
- Exact lead time
- Best pricing with quantity break options
- Quality certification details

Inquiry about 750ML heavy duty HDPE fuel oil sampling bottles

Looking for DRA for pipeline. Require for crude oil and refined fuels. Doing a market research.

Please quote us your best price. Our Ref#:NEA250833WE. Enquiry Deadline- ASAP. Item 1: 2 PC Level Sensor for DG Fuel Oil Tank. Model: 760EX/CF/P4. Mounting: Flange, 5K 50M F316 170631WK. Float Dimensions: 51mm

I am interested to purchase Sdlg filters, 10/10 each, like oil, fuel, transmission, hydraulic. One month

Mnf. Part No. Part Description Quantity 00530 Fuel filter element , paper 30 mic,SEPAR 530 50.00 ea 7W-2326 Filter As-Engine Oil 50.00 ea 287-6052 Filter Fuel 40.00 ea 233-5182 Filter element -air ( primary ) 233-5182 10.00 ea

Main engine 6L28/32, Ssangyong BW, engine oil filter, 2 pcs on cardboard, 1 pc metal

Inquiry About air filter papers, fuel filter paper, oil filter paper

Looking for Chinese manufacturers of Oil-resistant gasket sheet, recommended for high temperatures and pressures. Designed for use in subsurface connections. Recommended for water, steam, fuels, oils, salt solutions, natural gas, propane-butane.

We are planning to procure a Thermal Oil Boiler for our project and request your best quotation based on the attached datasheet and the following key specifications: Type: Thermal Oil Boiler, Horizontal; Service: Intermittent; Capacity: 1,200 Mcal/hr (5,040 MJ/hr); Fuel: Heavy Fuel Oil (HFO); Fuel Firing System: Pressure Jet, Monobloc burner (SAACKE brand or equivalent); Control System: Programmable Logic Control (PLC); Boiler Pumps: 2 units (1 Duty, 1 Standby) – IE3 motor standard; Oil Tank: Elevated, manually filled atmospheric day tank with capacity sufficient for at least 6 hours of boiler operation; Site Conditions: Altitude 12 m ASL; Max. Ambient Temperature 31.6 °C; Humidity up to 83% (tropical wet)

Receive offer for equivalent of the following pumps: 1. Screw pump (IMO PUMP) ACG 70 - 2N3F 85 - 65 615A - 1986, 2 pcs, fluid - fuel oil, type - screw, vertical pump, capacity - 25.9 m3/h, pressure - 0.2 Mpa, el. motor HXUR 262 A2 V1: 3x380 V, 50 Hz, Rev. 1440 rpm, Output - P = 5.5 kw, IP44; 2. Screw pump (IMO PUMP) ACF 100 - 3N4F, 2 pcs, fluid - lub oil, type: triple screw, Max. working pressure - 10 kg/cm2 at 40 cSt at max. temperature of the lub oil 90 C, el. motor HXUR 405 A V1: 3x380 V, 50 Hz, Rev. 1450 rpm, Output - P = 28 kw, IP44

Ask about belt type oil skimmer. Inlet waste water conditions: Composition is approximately 30% oil and 70% water, flow rate is 2 m3/hour, type of oil is Heavy Fuel Oil (HFO). Discharge requirements: Oil content is 5% or less

We are interested in obtaining a formal quotation for a HIAP Crane Truck as per the following specifications: Max lifting capacity: 5000 KG; Max lifting moment: 15.5 T.M; Recommended power: 20 KW; Max oil flow of hydraulic system: 36 L/MIN; Max pressure of hydraulic system: 20 MPA; Oil tank capacity: 90 L; Rotation angle: All rotation; Crane weight: 5000 KG; Installation space: 1000 MM; Engine: Diesel, 6 cylinder; Transmission: 200 liters; Other features: Air condition, fog lamp. Kindly send us your best price including delivery time, warranty terms, and payment conditions. Attached is an image with all the required specifications for your reference.

Looking for a reliable supplier of cork and nitrile rubber (Buna - N) sheet material similar to STYLE 1169 from Allstate Gasket. Ask if the material meets the following technical requirements: Material: Cork ? Nitrile (Buna - N); Density: 40 lbs/ft?3 (a??640 kg/m?3); Hardness: 65 ?±10 Shore A; Tensile strength: 250 PSI; Compression @ 400 PSI: 25a??35%; Recovery: a?￥75%; Oil Resistance (Volume Change): ASTM Oil #1: -5% to 10%, ASTM Oil #3: -2% to 15%, Fuel A: -2% to 10%; Standards: MIL - C - 6183 B Class 1 Grade B / F - 104: F - 226160M2T. Request to confirm if the product meets these specs or provide a technical data sheet (TDS) and send some photos of products. Ask if can provide documents when ordering (form E, Inv, Packing list, quality certificate). Ask the best FOB price for 50 pcs of sheets size 3mm*1m*1m (or send standard size for checking).

FAN;WATER PUMP;410 DIA;QA/QC CERT REQ A,C;P/N:2410201910007 QTY - 1 EACH. FILTER,FUEL;N485Q - 28101;QA/QC CERT REQ B;P/N:1408502810100 QTY - 1 EACH. O - RING;OIL FILTER;N85 - 03020;QA/QC CERT?

REQ A;P/N:1408500301700 QTY - 1EACH. BELT,V;BX 1041;QA/QC CERT REQ B;P/N: GB/T1154 QTY - 1EACH. FILTER,OIL;N485Q - 26100;QA/QC CERT REQ B;P/N:1408502610000 QTY - 1EACH

Ask if can supply tractor fuel filters and oil filters.

Dear Mr/Ms Could you please help me check and quote for this product: Oil and chemical pump truck with meter Model HG-948 Q'ty : 3pcs

Diesel fuel portable Oil Water Separator