Require QXJ-1600 model auto parts washer with detailed specifications:  
- Dimensions: Φ1800×1900 mm  
- Cleaning capacity: Φ1600×700 mm workpieces  
- Maximum load weight: 400 kg  
- Water circulation flow: 20 m3/h  
- Rotary table speed: 5 rpm  
- Pump motor: 3 kW (2890 rpm)  
- Heating elements: 3×3 kW configuration  

Need complete technical compliance confirmation and quotation with delivery timeline. Prefer manufacturers capable of meeting precise engineering requirements.

We are seeking flow sensors that meet specific technical specifications for industrial applications. Please provide your product details and compliance confirmation with attached requirements. Suppliers with relevant certifications are preferred. Kindly contact us with your best offer and lead time.

We require 1 unit of tractor load testing machine with disc-type load system (water-cooled, pneumatic caliper) for agricultural speed reducer testing. Key specifications needed:
- Rated absorption power: ≈15 kW
- Torque range: 10–200 N·m (2 chambers) and 201–1300 N·m (5 chambers)
- Max speed: 1800 rpm
- Torque detection: Bi-directional with ±2% FS accuracy and ±10% FS control accuracy
- Air pressure: 0.69–0.97 MPa
- Water cooling flow: ≈0.68 L/min/kW

Please provide:
1. EXW/DDP Jakarta pricing
2. Lead time and warranty details
3. After-sales support availability in Indonesia
4. Installation/utility requirements
5. Technical datasheet for PSW-1211 or equivalent models.

We require a compact grout mixer pump unit integrating mixer, agitator and pump in one frame. Essential specifications include:  
- Batch capacity ≥200L with overhead water tank for continuous operation  
- Electric motor 380-400V/50Hz/3-phase  
- Pump output ≥60L/min at 10 bar pressure  
- Capable of handling cement/sand/water grout with ≤4mm particle size  
- Adjustable flow control and sand:cement ratio up to 4:1  
Please provide technical datasheets confirming compliance with these requirements and recommended spare parts list for 1-year operation.

Require air and water nozzles (atomizers) with operating liquid pressure of 200 PSI and flow rate of 2 L/min. Need technical specifications and product catalogs for evaluation. Please confirm availability and provide detailed product documentation.

We need gas mixers for integration into a gas sensor testing system. The equipment must generate precise concentrations of hazardous gases (H?S, NO, CO, ethanol) ranging from ppb to ppm levels.  

Key requirements:  
- Minimum two gas inlets (target gas + ambient/dry air)  
- Programmable control of flow rates and concentrations  
- High mixing accuracy with stable output  
- Compatibility with Winsensor WS30 test chamber  

Required quantity: 2 units.  
Additional gas inlet options would be advantageous but not mandatory.

We are seeking 150,000-200,000 prepaid smart water meters for a municipal project. Required specifications include:
- Multi-jet type with R100 accuracy class
- Minimum 10 bar working pressure and 16 bar test pressure
- IP68 protection rating
- Compliance with international flow rate standards (Qn/Q3/Q4/Q2/Q1)
- Dry or semi-dry register transmission mechanism
- Reverse flow prevention capability
Priority given to meters demonstrating higher measurement accuracy and durable construction.

We require a corrosion-resistant polyethylene oil-water separator system for underground installation in a vehicle wash facility. The unit must meet these specifications:
- HDPE construction suitable for 15m×6m uncovered area
- 10 L/s nominal flow capacity with 1,800L total volume
- Integrated by-pass system for overflow management
- Removable coalescing filter maintaining<5mg/L hydrocarbon discharge
- Hydrocarbon level alarm (IP65+), load-rated cover, and anti-floatation anchoring
Please confirm compliance with EN 858-1 Class I standards and provide technical documentation.

I need high- and low-pressure water spray nozzles for indoor applications in hot, humid environments (UAE). The system requires durable, corrosion-resistant solutions with easy maintenance.

High-pressure nozzles specifications:
- Pressure range: 200-350 bar
- Material: Stainless steel or ceramic tip
- Spray angles: 0°, 15°, 25°, 40° (fan/jet type)
- Thread connections: 1/4" or 1/2" BSP/NPT

Low-pressure nozzles requirements:
- Wider orifices for low-pressure operation
- Chemical-resistant construction
- Adjustable or fan spray patterns

Please provide:
1. Technical datasheets with pressure/flow specifications
2. Pricing including MOQ and volume discounts
3. Customization capabilities
4. Production lead times and UAE export documentation

Require 12V three-in-one electric steering pumps with intelligent control system compliant with ISO 26262 safety standards. Must feature integrated motor and controller with 12VDC power supply (optionally support 24VDC) and IP67 protection level.

Key specifications:  
- Hydraulic: 0.5 kW rated power (1.5 kW peak), 12 MPa pressure range, 5–9.5 L/min flow  
- Electrical: CAN 2.0 communication, 110A max current with 120A fuse requirement  
- Software: CAN-based communication supporting J1939 protocol, dynamic control via angle sensor  
- Mechanical: M16×1.5 oil outlet, 4 x M8×1.25 bolt mounting  

Applications for light-duty vehicles with front axle load ≤2 tons. Natural convection cooling required. Prefer suppliers capable of meeting technical specifications for pickup truck applications.

We need to purchase pulsation dampers compatible with API 574 reciprocating pumps. Required specifications:
- Average discharge pressure: 5000 psi
- Fluid: Injection water
- Flow rate: 150 GPM
- Quantity: 4 units

Please confirm availability and provide quotation based on the technical parameters. Attached preliminary datasheet for reference.

Need to purchase 25 pieces each of Water Sensor Transducer (YDE-WDT) and Water Sensor Rope (20M/pcs). Require detailed price quotation with lead time (10-15 days mentioned), HSN code 90308990 confirmation, and product catalog/brochure. Prefer suppliers with ready stock availability. No contact details to be shared through this platform.

Looking for reliable suppliers of NFSB100-S00/SBT02 flow sensors. Require detailed product specifications, competitive pricing, and lead time information. Please confirm availability for bulk procurement.

Require a custom-built misting system with below specifications:

Dual-Liquid Dosing:
- Two separate 5-20L concentrate tanks
- Automatic proportional mixing (1-2% per liquid)
- Integrated with main water line

Pump Requirements:
- Stainless steel plunger pump
- 50-70 bar pressure capacity
- Flow rates: 1L/min (20 nozzles), 3L/min (60 nozzles), 12-15L/min (300 nozzles)

Nozzle Specifications:
- Stainless steel/brass construction
- 3-10μm droplet size
- Anti-drip function

Control System:
- Digital/PLC controller with dosing ratio adjustment
- Programmable misting intervals and cycles
- Optional remote/app control

Compact design preferred (≤50cm x 60cm). Pre-filtration system required to prevent nozzle blockage.}

Looking for 4 skid mounted centrifugal pumps capable of handling diesel, water, and soap solutions with a density range of 0.8-1.1. Required flow rate: 250-400 m3/hr. Discharge head: 80-100 meters. Need the units to be diesel operated. Please provide specifications and pricing details.

We require domestic water meters with DN25mm specifications. Essential parameters include:
- Q4: 7.88 m3/hr
- Qn: 3.5 m3/hr
- Q3: 6.3 m3/hr
- Q2: 0.063 m3/hr
- Q1: 0.039 m3/hr
- R Ratio (Q3/Q1): 160
- Starting Flow: 25 l/hr

Initial purchase quantity exceeds 6000 units. Supplier must provide ISO and CE certifications. Please send product catalog and competitive pricing for bulk order.

Require 5-6 PCS RGB underwater lamps with 1" or 1 1/2" hole. Need foam type nozzles with 7 m3/hr flow rate capable of 1 meter water spray height. Immediate delivery required to Hangzhou. Both items must be packed in same shipment.

Looking for flowmeters suitable for water applications with flow rate range 30-350 L/min. Require technical specifications and measurement accuracy details. Prefer direct communication with technical manager to clarify operational requirements.

We require 18,000 pieces of DN15mm plastic coupling seals with integrated security locks for water flow meters in blue color. The product must feature anti-tampering protection functionality.  

Each half of the seal needs engraving on the top side. Please confirm your capability to provide laser engraving service for this customization.  

Kindly provide detailed specifications and quality certifications for the seals. Indicate production lead time and packaging details for bulk shipment.

We are seeking water ionizers with the following specifications:
? Electrolysis cell: 11 plates (magnesium, titanium with platinum coating)
? Diaphragm type: AEM/CEM (food-grade material)
? Automatic polarity-reverse cleaning system
? Flow rate range: 1.5–3.0 L/min
? Must include multi-stage RO filtration with remineralization and optional structuring module
? Required certifications: CE, RoHS, preferably SGS/WQA/EU food-grade approvals

Customization requirements:
? OEM branding on device housing and packaging
? Polish language interface preferred for menu/UI

Please provide:
1. MOQ for initial order
2. Sample availability and cost details (including shipping terms)
3. EXW/FOB pricing structure
4. Production timeline
5. Shipping options to Poland (FOB/EXW/CIF Gdynia)
6. Warranty terms and after-sales support

Looking for reliable manufacturer for long-term partnership.

We require water sensor transducers and water sensor ropes for our monitoring system. Please provide detailed specifications including operating voltage, detection range, and material composition. Include certifications like IP rating and RoHS compliance. Looking for manufacturers with production capacity over 20M units annually. Kindly share product datasheets and MOQ details.

We are seeking road sweeper attachments compatible with wheel loaders (front loaders). Required specifications include:
1. Core components:
  - Collector bucket/dustbin
  - Water spraying system for dust suppression
  - Side brush assembly

2. Technical requirements:
  - Dimensions and weight specifications
  - Hydraulic pressure/flow parameters
  - Brush material details

Please provide:
? EXW and CIF pricing
? Minimum order quantity (MOQ)
? Production timeline and delivery schedule
? Warranty terms and after-sales support
? Product catalog with technical datasheets
? Visual documentation (product photos/videos)

Include information about customization options for different loader models.

Seeking 1 set of 25W UV sterilizer system for aquarium water treatment. Essential requirements include:
1. Product Specifications:
- 25W power rating
- 6GPM flow capacity
- Stainless steel construction
2. Compliance: Must provide CE/RoHS certifications
3. Delivery: Required within next month for machine testing phase
4. Purpose: Initial trial order for equipment evaluation
Please provide detailed technical specifications, warranty terms, and commercial invoice options.

We are seeking water purification systems to distribute in Costa Rica. Detailed requirements:  

Type II Water System:  
- Pretreatment with 0.5 micron & carbon filters  
- Integrated RO, EDI and UV components  
- Minimum 3L/hour production with 30L storage tank  
- Wall/table mounting capability  
- 115VAC 60Hz compatibility with IEC13 connector  
- Real-time monitoring of conductivity/resistivity & temperature  

Type I Water System:  
- Direct integration with Type II system output  
- 18.2 MΩ·cm resistivity at 25°C  
- ≤5 PPB TOC with mixed resin & UV photo oxidation  
- 0.22 micron final filter and leak detection  
- Flow control: 2L/min with multi-speed dispenser  
- Automatic recirculation & filter replacement alarms  
- Volumetric dispensing (100ml-25L) & pedal option  

Common Requirements:  
- IEC13 power connection with 2.5m cable  
- 100-240VAC 60Hz voltage compatibility  
- Parameter displays for both systems  
- TOC monitoring for Type I  

Please provide technical specifications, MOQ, pricing, and lead time.