We require a rack-based electroplating system for surface coating of sintered NdFeB permanent magnets in automotive applications. The system must handle 100,000+ pieces daily with 11-stage process including acid cleaning, Wood's nickel strike, copper intermediate layer, and nickel top coat.

Key specifications:
- Coating thickness: Ni (5-7μm)/Cu (3-5μm)/Ni (10-15μm)
- Automated loading/unloading capabilities
- Minimum 50kg/hour throughput capacity
- Complete utility consumption data (electricity, chemicals, water)

Provide technical documentation including:
1. Process layout drawings
2. Chemical consumption rates
3. Waste treatment system details
4. Inline quality monitoring options

Include specifications for electrical load requirements and automation interface compatibility.

I require electric hot plates with the following specifications:  
- Material: Stainless steel or heat-resistant plastic  
- 1-6 adjustable heating levels  
- Black color with 13*7.8cm dimensions  
- 250V voltage and 500W power capacity  
- Euro Standard plug with 90cm power cord  
- 10cm heat zone diameter and 900g gross weight  
 
Order quantity will be 200-500 units.  
Products must meet CB safety certification standards.

Need replacement controller for my electric bike.  
Original controller was 60V but want to upgrade to 72V or 84V system.  
Must remove speed governor restrictions for enhanced performance.  
Require higher power output for increased acceleration and top speed.  
Compatibility with existing bike components is essential.

Looking for reliable suppliers of MIL-DTL-38999-III series high temperature connectors. Specifically require D38999/26FG25SN electric plug connectors with full certification documentation. Please provide product specifications and compliance details for quality verification.

I need technical specifications for Australian plug inserts models XY-A-077 and XY-A-078-2. Please provide complete data sheets showing electrical ratings, dimensions and material specifications. The documentation should comply with Australian safety standards.  

Specifically require:  
1. Detailed product diagrams with measurements  
2. Current/voltage ratings for both models  
3. Insulation material composition  

Looking to verify compatibility with our manufacturing requirements. Prompt response appreciated.

Looking for European-made electrical components for a project in Lebanon. Specific requirements include:  
- Basic wall type one way light switch, 15A min (1200 units)  
- Double toggle wall type light switch, 15A min (300 units)  
- Power outlets with grounding (1000 units)  
- Choco socket plugs with grounding (800 units)  
- Communication and satellite cable wall outlets (300 and 200 units respectively)  
- 3-module socket dams and frames (1000 and 2000 units)  

Have arranged forwarder. Require suppliers to confirm shortest production lead time.

Looking to add small kitchen appliances to product portfolio. Seeking reliable partners to supply 9L mini ovens for the Turkish market. Please provide: 1. Product model code, dimensions, and 9L capacity. 2. Electrical specifications: 220–240V / 50Hz, plug type suitable for Turkey. 3. CE Declaration of Conformity (DoC) and complete EN test reports (EN 60335 - 1, EN 60335 - 2 - 6, EN 55014 - 1, EN 55014 - 2) in PDF format. 4. FOB and CIF Kayser? prices. 5. Production lead time and sample availability, including cost and delivery time. Potential purchase volume is about 5,000–6,000 units. Initial trial order is 300 units. Provide best pricing based on initial quantity with option to scale up in the future. Require CE documents and test reports.

Looking for a reliable manufacturer to produce baby hammocks with an electric motor swing function, suitable for infants and meeting international safety standards. Key features include an electric motor with adjustable speed, soft and breathable material, safe suspension system, optional music function, timer or remote control, maximum load capacity of 15 - 20 kg, and EU standard plug or USB option. Interested in MOQ, pricing, lead time, available samples, and custom branding. Request product catalog or specifications if existing models match requirements.

Automatic seed grader with this specification Two Screens 3 Perforated sieves Upper: 1 No. Lower: 2 Nos. Length & width of each screen: 550x450mm – 1No. & 770x450mm-2 No Provision of screen cleaning: Brush frame (Bristles) No. of Scalping: One No. of Air Aspiration: Two No. of Grading: Two Feeding: Pneumatic Screen Inclination: Fixed Electric Motor: 1.5HP, Single / three phase. Cleaning Device: Nylon Brush Overall Size: 2300mm Length x 750mm width Ground clearance: 600mm Capacity : 500kg/hr (on wheat basis) Accessories: Set of Screens (Top & Bottom)

Could you please provide the quotation for me? 1. Pressure Transmitter GS4200-0010AB Range : 0 - 10 Bar Output          : 4 - 20 mA , 2 wire Accuracy : ± 0.25% FSO Adjustment : ± 10% FSO Zero and Span Connection : 1/4'' BSP Male , Stainless Steel Ambient Temperature : -40 to 85 C Supply Voltage : 13 - 36 V DC Electrical Connection: DIN Plug Socket to DIN43650 Enclosure Rating : IP65 QTY 2 EA 2. Low Pressure Transmitter LP1003-500AB Range : 0 - 500 mBar Output : 4 - 20 mA , 2 wire Accuracy : ± 0.5% of span BFSL Supply Voltage: 13 - 36 VDC Operating Temperature: -20 to   85 °C Pressure Connection: 1/4" BSP Male QTY 1 EA 3. Pressure Transmitter GS4200-0001AB Range: 0 - 1 Bar Output: 4 - 20 mA , 2 wire Accuracy: ± 0.1% FSO Adjustment: ± 10% FSO Zero and Span Connection: 1/4'' BSP Male , Stainless Steel Ambient Temperature: -40 to 85 C Supply Voltage: 13 - 36 V DC Electrical Connection: DIN Plug Socket to DIN43650 Enclosure Rating: IP65 QTY 1 EA

Please send a quote for one unit shaper machine as per following specification: Shaper machine Maximum Planing/shaping Length(mm) : 500 or more Ram Underside To Table The Maximum Distance/ Max. Distance from lower edge of ram to table: 370mm or higher. Dimensions of Table Top (LXW) : 440x360mm or higher Max. Stroke Length of the Tool head - l20mm or higher Max. Swivel Angle of the Tool head (vice):-  60\\\\' Number of ram reciprocation per minute - 14-80 times per min or higher Width of the T-Slot fbr Centre Positioning - l8mm or higher. Range of table power feed: horizontal: 0.2 to 2.5 mm Range of table power feed: vertical: 0.08 to 1.00 mm Electric Motor: 3kW or higher. Carton size: as per manufacturer. Net Weight/Gross weight: 1500 kg or higher Thanks

Hi, I'd like to buy 3 of these toilet seats with Australian electrical plugs. 

We would like to purchase a LABORATORY DIGITAL AGITATOR B30-H in the amount of 1 piece. 

There is an enquiry for :=Shunting Locomotive with traction 1,000 tons-Wheel Gauge : 1,000 mm.-Rail Wheel : Solid Steel Wheel-Drive System :  4x4 ( All Wheels Propelled )-Brake : 2 x Electric Magnetic Disc Brake-Seat : On the shunter – chair pointing in 1 direction ,access from both sides-Control : 2 functions ; direct drive at control desk in the cab and remote control                     portable with strap more than 250 meters reach transmitter   receiver,                     charger-Design : Strong and low steel structure from profiles and steel sheets, 10-30 mm.                frame with support area for jacks and with 4 hoks on top for easy lifting-Lubricants : Mineral Oils, first oil fill included-Painting : Yellow RAL 1028 with 3 layer paint system industrial coating, total thickness                   225-300 micron. 4 pcs. Corner making colour   Black stripes-Pre

I am contact you to ask about electric mosquito swatter have you this in your offer? We need a: - electric insect swatter - battery swatter (we don\'t want a battery swatter or one with a plug), charging only via USB - included with a stand for the mosquito swatter and a USB cable - important: USB TYPE C - packing in a box - the electric mosquito swatte must have a CE and ROHS certificate If you have operating specifications for your product, please send it to me as well (does it have several operating modes, does it have a light, etc.) please present me your offer and prices, we are interested in an order for 10,000 pcs. 

Dear Sir/Madam, We are a company located at Philippine Export Zone, engaged in the manufacturing of various Electrical wiring devices. We\'d like to inquire if you could supply us the parts for our requirements for the heavy-duty AC Plug 20A, 250V, 3-prong parallel ground. Please see below the attached pdf file of the parts for your reference. Looking forward to hearing from you soon.

 We need from you  200 pcs of 220v plug type uk switch socket gfci socket for electric heater.

I need PN for all pins male and female, Non-Sparking Explosion-proof .15A, 25A, 60A, 100A, 150A, 200A.

Inquiry About 2016 best sale GFCI British 13A electrical circuit breaker plug socket protectors with CE certificate

I'm interested in these. Need a quote for 100 packs of male and 50 packs of the female connectors.REMA 320 Amp Connector Plug For Electric Forklift/Stacker Cable Charging