Inquiry about electrical geysers for a marine environment

Quantity Required: 30 LTR 

Capacity: 242 units 

15 LTR Capacity: 570 units 

Product Specifications: 

1. Installation: 30 LTR tank should be suitable for horizontal wall installation 

2. Shape: Cylindrical 

3. Power Specifications: 220-240V, 50/60Hz 

4  .Corrosion Resistance: The inner and outer tank must be protected from corrosion and suitable for marine conditions 

 5.Inlet and Outlet: Should be made of stainless steel to prevent rust and corrosion 

I want to know if Kademan 30M Water Resistant Stainless Steel watch model number 6068G still available ?

We are interested in buying these goods: ? Silicone Pet water feeders. Dog Water Bottle For Walking ? Silicone Dog Finger Toothbrush ? Multicoloured Baby Silicone Cup Cover ? Baby Carrier with Hip Seat ? Silicone Training Baby Sippy Cups ? Baby Feeding Dishes Silicone ? Foldable Nappy Bag Diaper Changing Mat Baby ? Baby Silicone Kids Toothbrush ? baby proof corner guards ? Caps Baby Shower Eye Protection ? Protective Protective Helmet for Babies ? Baby feeding Supplies Fruit Vegetable Silicone ? Cabinet Locks with Adhesive Adjustable ? Organizer For Car Kids Baby with touch holder ? Round Cotton Rope Woven Basket ? Portable Arched Wardrobe for bag ? Light Dimmable Desk with Mobile Cell Phone Holder Bracket Stand ? Silicone Cable Organizer ? Sofa Armrest Organizer with Pocket ? Stainless Steel Finger Protector Kitchen Knives ? Heat Resistant BPA Free Silicone Kitchen Pot Pasta Strainers Colanders ? Aluminium Burger Press ? Plastic Retractable Refrigerator Dividers ? Silicone Oil Br

Hi
I am looking for inductive pressure and temperature gauge
Please advise the price and lead time for: Pressure gauge – 5 units 4" stainless steel bottom connection explosion proof inductive electric contact pressure gauges Pressure: 0-6 BAR Sanitary Stainless Steel Clamp type Diaphragm, Vibration Resistance Electric Contact Pressure Gauge. Double Limit Alarm Low Limit - Below Set Point the contact - Open High limit - Below Set Point the contact - Close Connection Size: 1.5" (Tri-Clamp 3A) Oil-Fill Type Wiring Configuration: CM 12 Temperature gauge – 5 units 4" stainless steel bottom connection explosion proof inductive electric contact temperature gauges Temperature range: 0-120°C Sanitary type Stainless Steel Electric Contact Thermometer (Single Lower Limit) Probe Diameter: 8mm Insertion Length: 120mm Connection Size: 1.5" (Tri-Clamp 3A) Electrical Contact: Normally-Close (Below set-point the contact-close) Oil-Fill type Wiring Configuration: CM 02 Other requirements: 1. Contact requires intrinsically safe type (Ex ib T4) 2. To provide i

DF-6S composite liner

Hello there We need 1mhz 3mhz Dual Frequency Transducer Ultrasonic Beauty Transducer, The Piezo should be glued in the head (Heat resistance required) and 2 wires out for connection, The head\'s material should be steel. 

We are writing to request a quotation for scale and corrosion inhibitors for water treatment at our facility. Please find the detailed specifications and requirements below: Product Specifications: The products should be suitable for treating feed water in a reverse osmosis system. Treatment capacity: 8000 operating hours Specifications Unit 450 Unit 451 Recirculation rate 7000 m3/ h 5000 m3/h capacity System 8800 m3 5000 m3 Temperature difference 6°C 6°C (max) Average concentration number 1.75 1.75 Average evaporation rate 75  m3/h 54 m3/h Average holding time 61..6 48.6 Average blow down rate 100 m3/h 72 m3/h Average make up rate 180  m3/h 130 m3/h Average SDI: 4.9 Average retention time: 20 minutes Required Products: Scale inhibitor compatible with (SRB) sulfate-reducing bacteria with a dosage rate of < 10 C/ml Corrosion inhibitor with MPY 3> for carbon steel Additional Requirements: Products must be supplied in non-returnable barrels Shelf life of at least 2 years from the production date All necessary additional materials for achieving the required guarantees must be provided Technical data sheets, including chemical and physical properties, must be provided A list of references where these materials have been used successfully must be included Please include in your quotation: Detailed product specifications Pricing for the required quantities Delivery terms and timeline Any additional recommendations for optimal performance We look forward to receiving your comprehensive quotation. If you need any further information, please don\'t hesitate to contact us. Thank you for your attention to this matter. Best regards,

Inquiry About PFA Micropowder with corrosion resistance and heat resistance

Inquiry About Heavy duty Flexible Underwater Welding cable 70mm2 super flex pure copper oil/water/corrosion resistance CPC rubber sheath

i urgently need a quotation
CABLE REELING DRUM FLEXIBLE CABLE, 3CX70SQMM+1X25SQMM TRAILING, CABLE VOLTAGE: 1100, SUITABLE FOR CONTINUOUS TRAILING (EPR TRAILING FLEXIBLE FESTOON  CABLE FOR LIMESTONE STACKER POWER FEEDING THROUGH CRD CONDUCTOR . MULTI STRANDED ANNEALED TINNED COPPER, CABLE SIZE: 3 CORE X 70SQMM +1CORE 25 SQMM, VOLTAGE: 1100V, SUITABLE FOR OUTDOOR USE ALONG  WITH STEEL BRAIDING FOR MECHANICAL STRENGTH. SEPARATOR TAPE: SUITABLE MATERIAL SEPARATOR TAPE MAY BE APPLIED OVER THE CONDUCTOR FILLERS, NATURAL OR SYNTHETIC FIBRES OR ELASTOMER SUITABLE FOR THE OPERATING TEMP AND COMPATIBLE WITH THE INSULATING MATERIAL. BRADING: MIN 70% COTTON BRADING ONLY WITH DOUBLE SHEATH, HEAVY DUTY SHEATH TYPE: SE3/SE4 OF IS 6380-1984.CSP (CHLOROSULPHONATED POLYETHYLENE) MORE COMMONLY AS HOFR (HEAT SOIL RESISTANT AND FLAME RETARDANT (QTY 500M

we require safety shoes with following specifications

1. Upper made with Buff-full grain leather with water proof 2 to2.2 mm thickness 2. Also, Upper leather is with Din-S3 specification that is water penetration after 60 minutes. 3. Rubber Nitrile sole, heat resistant 300 degree for one minute. 4. Sole with Antistatic properties 5. Insole with memory foam for Extra comfort. 6. Steel Toe-cap with 200 Jules

2 x Perkins Generator 1250kVA 4012‐46TWG2A 400V Perkins Generator each in a 12 m container, the base or foot of the container corrosion proof/resistant as this will be directly place on the ground. DSE8610 Controller sync ready Shipped to Lusaka, Zambia

Inquiry About Debao Automatic ctp plate processor with PVC tank and duralumin body resistant to corrosion

Bolted Steel Storage Tank

Inquiry About Non-Sparking Non-Magnetic Corrosion Resistant Aluminium Bronze CROSS PEIN HAMMER

I am interested to know if you can manufacture a custom made wire form using 5mm foog grade 304 stainless steel wire with a heat resistant silicone shrink wrap handle
For export to New Zealand

Currenly we are interested in 20 pieces of basketball backboards, rim: Backboard - Tempered glass or glass 10mm, size - 180 x 105 cm ( /-1cm), Aluminum frame. Backboard must have EN 12150-1:2012 or EN 12150-2:2012 cerificate Hoop - material: steel, diameter 45cm, 1 or 2 spring, 12 hooks Grid - material: high quality rope (nylo, capron, etc.) diameter 4mm or more, length - 50cm, 12 loops, sun resistant

Good day, I need more information tu purchase specific etch-resistant inks for stainless steel. Deep etching   Pickling acid resistant please. 

Dear Sir or Madam, I would like to ask you for a cost estimate for perforated sheets. Please for two materials stainless steel 316 and aluminum 99.5. EN AW-5083 3.3547 (ALMG4,5MN0,7). The contact surface must be flat. The materials must not contain zinc or zinc alloys. We only need rectangular plates. They don\'t have to be sawn exactly. It doesn\'t matter whether they are 4 or 5 mm longer or shorter. I gave you the dimensions in my first message. For us, it is important that the edges are rounded so that nobody injures themselves. The materials must be resistant to corrosion, heat >120°, high humidity 95 %. 76 pieces (perforated plates) with the following parameters: Length: 108 cm Width: 98 cm Thickness: 1.5 ≤ 2 mm 22 pieces (perforated sheets) with the following parameters: Length: 98 cm Width: 81 cm Thickness: 1.5 ≤ 2 mm 18 pieces (perforated sheets) with the following parameters: Length: 90 cm Width: 60 cm Thickness: 1.5 ≤ 2 mm 8 pieces (perforated sheets) with the following parameters: Length: 200 cm Width: 100 cm Thickness: 1.5 ≤ 2 mm For all sheets we want round hole diameter 3 cm. Distance between two holes (from center point to center point) min. 40 ≤ 50 mm. Hole pattern single row. The number of holes at your own discretion. 

Thickness 40 volume weight 50 kg fireproof, moisture-proof and corrosion-resistant veneer, $6.4 per square meter.