I need API 5CT standard tubulars for oilfield operations. Required specifications:

Casing pipes:
- 18?" 87.5 lbs/ft K55
- 13?" 61 lbs/ft K55  
- 9?" 43.5 lbs/ft L80
- 7" 29/26/23 lbs/ft L80

Tubing:
- 3?" 9.3 lbs/ft J55 & L80
- 3?" 9.2 lbs/ft L80 VAM TOP
- 2?" 6.5 lbs/ft L80
- 2?" 6.5 lbs/ft L80

All materials must be seamless with R3/R2 connections (STC/LTC/EUE). Total quantities range from 3,750 FT to 750,000 FT per specification. Please provide competitive pricing per foot.

We require underfloor heating components for a 1800 sq mt residential project. Needed items include manifolds, copper pipes (15mm diameter, 1.5mm thickness), and plastic mats with 150mm grid spacing. Specific quantity to be advised by supplier based on technical requirements. Open to manufacturer recommendations for material specifications and packaging solutions.

We require a pump pressure test system capable of handling maximum pressure of 725psi (50 bars) with 1/2" NPT pressure hose connection. The unit should have 3.6 gallons tank capacity and operate within maximum temperature of 50°C (120°F). Required specifications include piston volume of 2.3 cubic inches, dimensions 28"x8.5"x9.5", and weight under 14lbs. Please provide RIGID Model 50557 (Catalogue 1450). Looking to purchase 2 units for leak detection in heating, potable water, fire sprinkler, compressed air, small bore pipe lines, and oil systems.

We require magnetic level gauges with the following specifications:  
- Total length: 2280 mm  
- Chamber connection material: 316L stainless steel  
- Socket weld flange with pipe nipple configuration  
- Specific gravity: 0.955  

Mandatory requirements:  
1. OEM compliance with ABB K-TEK Corporation specifications  
2. Model: KM26S/SS6/W2SWSWD5 SWR11/SWR151/P5/M2G7C/IH2/2280 MM  
3. Valid origin certificate and calibration documentation  

This procurement is for replacement in HRSG blowdown tank systems. All technical parameters must strictly match our existing operational equipment.

We require Cam and Groove (Camlock) couplings for chilled water piping connections.  
Please specify:  
1. Available sizes in standard dimensions  
2. Material options (Stainless Steel or Brass preferred)  
3. Availability of shut-off valve variants  
4. Working pressure specifications  
Suitable for industrial chilled water systems in Bangladesh.

We are Flexicraft seeking copper expansion compensators with female sweat ends for industrial applications. Please confirm if your products meet standard specifications for HVAC systems.  
Require clarification on minimum order quantity and compatible pipe dimensions.  
Need to understand your company's distribution capabilities and any geographical restrictions that might affect this procurement.

I need 80 pieces of stainless steel pipe fitting reducers with NPT threads, specifically for 1.5" to 2.5" connections in 150lbs pressure rating. Please provide pricing details based on technical drawings.  
Current requirements include:  
- Material compliance with ASTM standards  
- Full NPT threading on both ends  
- Pressure test certification  
Share your best offer with production lead time. No intermediaries - direct manufacturer quotes preferred.

We require fluid strainers with the following specifications:  
- Configuration: Piping, Y-type  
- Process fluid compatibility: Water, Oil, Gas  
- Size: 2 1/2" NPT female threaded connection  
- Pressure rating: 1000 PSI/PN63  
- Material: CF8M (ASTM A351)  
- Certification: CE standard compliant  
- Required quantity: 160 units  
 
Please provide technical documentation including dimensional drawings, datasheets, and shipping weight estimates. All quotations must include product compliance certificates.

 Product Requirement:  
- Type: Solenoid Valve for Turbine ICV Actuator  
- Pipe Size: 3/8 inch  
- Orifice Diameter: 5.5-6.0 mm  
- Electrical Rating: 240 VAC  
- Configuration: 4-Way  
- Connection: Bolted  
- Pressure Rating: 5080 PSI  
- Coil: Wet Type, Class H  
- Enclosure: Terminal Box with IP65 Rating  
- Body Material: Alloy Steel  
- Compliance: IEC Standard  

Additional Specifications:  
- Must match OPC standard  
- Reference Part Number: F-DSG-01-2B2-A240-70 (YUKEN KOGYO design)  

Quantity Required: 4 pcs  

Supplier to Provide:  
1. Technical specifications confirmation  
2. MOQ and unit price  
3. Lead time for production  
4. Certification documentation  

Product Required: Pan Assembly Busbar Chassis  
Quantity: Bulk/Large lot  
Material Specification: 100% copper construction  
Key Requirements:  
- Compatibility with Most MCB (top/bottom connection)  
- 30 ways configuration  
- 225A current rating  

Supplier to Provide:  
1. Detailed technical specifications  
2. MOQ and unit price  
3. Production lead time  
4. Certification documentation  

Note: Prefer manufacturers with busbar systems expertise.

Have an urgent initial order of 2,500 white towel radiators that needs to go into production. If can offer a very competitive price, would like to follow with a second order - starting with 10,000 units and then 17,000 units - in 22mm, 25mm, and middle connection models. Need the first batch ready and delivered in September. Ask about delivery days from Turkey. Ask for 500x1186 flat white exw prices, 18 pipe qty, without packaging

Ducting Insulation , Copper Pipe Insulation and Duct Flexible. Can you send me the catalogue?

Supply and Deliver a Canopy Type Standby Generator with digital control modules and changeover switch. Prime output shall be 30kVA and Standby output shall be 33KVA. Basement Tank Shall be 200l. Installation, testing and commissioning the new generator (This shall include all the cable accessories that a deemed necessary). Fill - in the New Generator basement tanks with 100l of fuel. Supply and installation of required Earthing. Allowance for Factory Acceptance Test. Issuing of Certificate of Compliance (COC) & Supplying of manual. Supply, deliver and install external 2000l diesel bulk tank, connect with galvanized pipe to generator base tank and tank should have digital flow meter and filter.

Order a new flex pipe top hose which goes from the top of the pump to the sand filter along with the connection at the top of the pump. Need 2 new jubilee clips and the silicon glue. Pump details: TYPE: 72543 single phaze 1 H.P. induction motor 240 volt 1,000 watt.

Ask if you supply watermark certified Pop - Up Bath Waste and Overflow for Australia market. Plan to purchase with 150 MOQ at about 9 - 10 US per unit. Need the outlet to connect to DN40 down pipe. Ask about product material. Ask if there is P trap waste made of PVC or ABS. Ask for product catalog.

Need to procure four horizontal - type screw pumps. Provide quotation and availability details based on the following technical specifications: Quantity: 04 Units, Configuration: Horizontal Type, Maximum Working Pressure: 600 PSI, Shaft Speed: 600 a?? 1750 RPM, Flow Rate: 0 a?? 7 Lpm, Operating Fluid: Water, Fluid Temperature: 15 a?? 65 ?°C, Seal Material: EPDM, End Connections: ??" Sch. 40s Pipe, Flanged/Threaded, Electric Motor: 50 Hz, 3 Phase. Include unit price and total cost, delivery lead time, warranty details, shipping terms and conditions, technical datasheet (if available) in the quotation.

We are looking for Wash over Pipe for the following sizes: Wash over Pipe OD 5 ??a??, 22.5#, Long 30Ft Connection FJWP Box x Pin; Wash over Pipe OD 3 ??a??, 9.3#, Long 30Ft Connection FJWP Box x Pin. Please check your inventory and advise ASAP

Inquiry about?aluminium drill pipe. Specifications: 5 - 1/2 Aluminum Drill Pipe x 4.78'' ID, IEU; 7'' x 4 - 1/8 (104.8mm) ID Tool joint, 9m length; 5 - 1/2 FH Connection Pin x Box

Inquiry about Spray Nozzle. 

1. Open Spray Nozzle – 22 Nos Specification: K=80.6 ? LPM/BAR1/2(K=5.6 ? GPM/PSI1/2) ? Make: Stainless Steel 316L ? Approval documents UL/FM required. 2. Standard Pendent Sprinkler Head for Office building - 36 Nos Specifications: ? Type Standard pendent, K = 5.6 , Temp 68°C ? Piping Connection DN15 NPT ( ? inch) ? Material of Construction Brass or Equivalent ? Paint/Finish As per Manufacturer’s Standard ? Approval documents UL/FM required. 3. Foam water nozzle spray for New Gantry and Pump shed – 20 Nos Specifications: ? Type Pendent sprinkler, K = 3.0 ? Piping Connection DN15 NPT ( ? inch) ? Material of Construction Bronze or Equivalent ? Paint/Finish As per Manufacturer’s Standard ? Approval documents UL required.

You are requested to advise your quotation for the following WITH SHORTEST DELIVERY TIME - FOR OUR RE-SALE. 1. Ceramic Band Heater for pipe    ** It can be fitted on the pipe without dismantling the pipeline.    Ceramic Band Heater Inside Diameter = 273 mm    Ceramic Band Heater Length = 630 mm    Ceramic Heater KW - 8 KW    Connections: Terminals - 3-phase - 4 wire - 380VAC x 50Hz    Quantity: 3 sets2. K-type Thermocouple with 2 meters heat-resistance leads    with lugs - connect to the control panel. -- 10 pcs3. Heat Resistance supply wire - 6 mmsq. to be connected from  the heater terminal to the control panel -- 100 meters  Below all panel mount type4. Amp-meter 96mm x 96 mm  with CT  -- 4 sets5. Voltmeter 96mm x 96 mm - 380vAC - 3-phase - 50Hz -- 3 Set6. Selector switch for Amp. meter 3-position -- 3 pcs7. Selector Switch for Voltmeter - 3-position -- 2 pcs8. Indicating Lamp Size 1\" Red-Green-Blue-Yellow -- price9. Stepdown transformer 220VAC to 24VAC for control -- 2 pcs

Hi, I'm looking for quote for a macaroni pipe standard material with CShydril connection.

VALVE, SOLENOID: PIPE SIZE: 1/2\" CONNECTION: 3/8\" FNPT PRESSURE RATING: 6.3 MPA ELECTRICAL RATING: 230V ELECTRICAL CONNECTION: SCREW TERMINAL: FOR ST TURNING GEAR MOTOR,FLOW: 25L/MOEM MFG :

Please provide a commercial offer for the position below: 1) Anchor for eccentric wellhead equipment – 75 pieces Note: Anchor for eccentric wellhead equipment, body material 42 SgMo, die material (crackers) 20 CrMnTi, length of the die (crackers) 150 mm, spring material 60 Si 2 Mn, with connection dimensions 4 1/2" BOX EUE (top) x 3 1/2" PIN EUE (bottom), standard SY/T5112 -2008.      1) The method of landing and release is mechanical; the principle of operation is axial (by axial movements of the pipe column, while the rotation of the tubing is not required) Designed to hold the pump in the casing of a well with an outer diameter of 177.8 mm. The range of internal diameters of the captured pipes- 166;164;161,6; 159,4; 157; 154,8 mm. 2) Warranty period: 2 (two) years from the date of delivery If the items are for production, please specify the production dates. We will be grateful for a prompt response and hop

 Presently engaged in manufacturing of irrigation pipes. I Am looking for a machine to manufacture HDPE Woven sack hose pipe for drip irrigation sublines with pre inserted grommets for drip lateral connections.