We are looking to purchase cast aluminum cookware sets for the USA market. Our requirement is 1*40' HQ container load with each set containing 4 pieces.  

We have a specific product image reference for this cookware set. Please confirm your manufacturing capability based on the design specifications.  

Immediate suppliers with experience in the North American market are preferred. Kindly provide product details and certifications compliance for kitchenware products.

I need to purchase door handles for electric cabinet locks. Specifications required:  
- Part No. MS502-2-2R: Red button without key, zinc alloy construction. Quantity: 50 units.  
- Part No. MS304-1-2R: Push button without key, zinc die casting body with nut and zinc plating camalloy. Quantity: 50 units.  
Require delivery within 2 weeks. Prefer payment via bank transfer.

We require a vertical shrink-fitting furnace for heating aluminum continuous casting roll shells to facilitate expansion and assembly on core components. The equipment must accommodate the thermal expansion process during roll shell assembly. Please provide technical specifications and budgetary proposals based on industrial-standard requirements. Kindly omit contact details in your response as we will follow up through official channels.

I need to purchase aluminum shutters for 30 windows (approximately 80 m2 total area). The requirement includes foam filled type aluminum shutter slats with all necessary parts and screws. Please provide pricing details for the complete set of shutters including installation components.

We are looking to procure stainless steel investment casting parts for industrial applications. Please provide detailed specifications and material certifications. Suppliers with ISO quality standards and export experience are preferred. Kindly share your product catalog and lead time estimates.

We are seeking manufacturers of electric bike frames for motorcycle parts. Please specify your minimum order quantity, material specifications (e.g., aluminum alloy), and production lead time. Include payment terms and quality certifications. Preference given to suppliers capable of long-term collaboration with consistent quality.

We are looking to purchase recessed downlights with the following specifications:  
1. Material: Die-casting aluminum and heatsink  
2. Surface Finish: Matt White  
3. Electrical Parameters:  
  - Voltage: 220V  
  - Power: 15W  
  - CCT: 3000K  
  - Beam Angle: 30 Degree  
4. Model: BSP207CT095  
5. Required Quantity: 78 pcs  

Please provide:  
- Product specifications sheet  
- MOQ and unit price  
- Production lead time  
- Warranty terms  
- Certifications (CE/RoHS/UL)

Need a quote for two pendants made in sterling silver. The pieces have volumes of 3,863.35 mm3 (≈ 40.0 g sterling silver) and 2,857.74 mm3 (≈ 29.6 g sterling silver). Provide itemized quote of the price for one piece of each design (3d print, casting, finish) for polished finish or sandblast finish with polished bail, shipping to Madrid, Spain. Let me know the cost of production for each part of the process. Delivery time is 10 - 15 days from payment. Prefer DHL or Fedex.

Aluminum Wire Rod Continues Caster and Wire Rod Hot Rolling Mill - 2000 Metric Ton Per month as standard

Aluminum Tent frame roof cover HS CODE: 6306220090; Size:15m width,30m length,3m side height,450m; Main frame structure: Hard pressed extruded aluminum alloy T60l61/T6, no poles inside,aluminum profile :166*88*3mm; Roof cover :White 850g/sqm pvc fabric; Side wall : white color 650g/sqm pvc fabric with clear pvc windows; Bay distance :5m; With full accessories, hot galvanized steel accessories and parts; Wind resistance level: 8 - 10km/h; I would like a quotation for 1 tent

Is interested to quota designs and supply of ETFE for Singapore project. Have to include compressor and accessories ( example : aluminum profile and all the connection parts)

We are preparing a bid for a government tender and request your most competitive per - unit price for the seal and Valve Blockers and Unblockers. 450 x 3/4" Valve Blockers (non - corrosive material); 20 x 3/4" Magnetic Valve Unblockers (universal, adaptable); 50 x 5/4" Valve Blockers (non - corrosive material); [Quantity not specified] x 5/4" Valve Unblockers (non - corrosive material). Technical Specifications: Material: Cast or CNC machined aluminum with high mechanical properties. Steel arch closing part. Surface Treatment: Powder coated for corrosion and weather resistance. Dimensions: Overall Width: 97.20 mm, Maximum Height: 88.20 mm, Semi - circular Opening Diameter: 40 mm (?20 mm). Operation: Magnetic key opening and closing. Color: Preferably blue or equivalent. Please also provide a representative sample for physical inspection to ensure conformance.

A customer requires 8 x Palm Tree Outdoor Patio Set Swivel Barstools 30" H Dark Bronze Cast Aluminum, Red Cushions. Ask if you can provide these.

We would like to get the quotes for container spare parts. Container Plywood 150 1220X2440X28 MM; Cross Member 60 4.0x45x122x45x2350mm; Front Corner Post - 40HC 15 6.0x229x245x2700; Rear Corner Post (outer) 5 6.0x70x232x40x2400; Rear Corner Post (inner) 5 12x113x40x2353; Side Panel - High Cube 25 1.6x1116x2700; Roof Panel 15 2.0x1045x2356; Front Panel High Cube 15 2.0x1024x2700; Bottom Side Rail 20 4.5x30x50x155x5702; Top Side Rail 20 3.0x60x60x5702; Corner Casting 20; Door Gasket GP 25; Door Header Plate (Top end rail) 25 3.0x397x2400; Door Header 15 4.0x112x137x113x2400; Door Sill 10 4.5x158x150x2400; Locking Bar 20; Locking Bar Bracket (Small) 25; Locking Bar Bracket (Big) 25; Retainer Catch 50; Cam and Cam Keeper 50; Door Hinge

Please quote me below RFQ 10 X Valve Type: Gate, Knife typeSize: 200 mmConnection: Wafer flangelessFace-to-Face Length: 68 mmBody Material: Cast Iron (CI)Trim Material: Blade SS GR 316LActuation: Pneumatic Cylinder, Double ActingStem Design: Rising SpindleSoftgoods: VitonStyle: PillarTemperature Rating: 95°CDesign Rating: 600 kPaSupplier Part Number: LDCCINWRReference No: LDC-CI-NWRAdditional Materials:Stainless Steel 304LTrim Ni-hard wear ring19 X knife Gate valve DN600Wafer typeDuctile iron bodyStainless steel disc EPDM liner Handwheel 2 X 3 piece ball valve extended Stainless steel Application: Nitrogen gasDN40Spring return actuator

Do you make cast aluminum patio table s

Inquiry about China automatic horizontal parting flaskless green sand Z5161 casting molding equipment for making ductile iron

can you gold plate aluminum parts?

Hi  We would like to purchase 6 Yangma pistons with the following specific models Yangma Model YANMAR T260L-ST Piston part number 151623-22071 Quantity: 6pcs Material: Aluminum

We are looking for opportunities to make a telescopic pole. I provide the desired dimensions, we can adapt to your options. We would like to make the telescopic pole from carbon or aluminum or mixed parts from fiberglass. The trial batch is planned for 1,000 units, followed by 10,000 units. Please let me know about the possibilities. 

 Beryllium Copper Alloy for the Plunger Tips of the Aluminum die casting industry Chemical Composition С17500 standard: ASTM/GB/T5233-2001/EN12163 Berillium 0,4-0,7 Cobalt ∑2,1-2,4 Nickel Aluminium 0,15 max Silicium 0,15 max Cupper base Sizes: CU/BE/CO D.87 L=87 CU/BE/CO D.92 L=87 CU/BE/CO D.82 L=87 CU/BE/CO D.72 L=87-URGENT ONE CU/BE/CO D.52 L=87 Thanks in advance!

1. Central Impression (CI) Flexographic Printing Machine for high-quality printing on packaging films. 2. Metallizer Machine for adding aluminum coating to flexible films used in packaging. 3. CPP Film Production Machine for producing cast polypropylene films. 4. BOPP Film Production Line for biaxially oriented polypropylene films. 

Dear, We would like to get preliminary information. Product: Automatic Rotary Furnace Casting with  Conveyor Mould Machine.(Aluminum and Copper melting )If your side answers 100% of our questions ,then we can  understand the  details and can move to the next step.....etc.!! 1-- Power consumption:If the Automatic Rotary Furnace Casting with  Conveyor Mould Machine Line works at full power .!! Then how much KW electricity consumes it in 1 hour.jQuery1113010601492338436969_1737159152141ANSWER:  2-- How many Tons of aluminum ingot goods  Capacity can produce 1 hour.? ( if one piece of aluminum ingot 10 Kg.)ANSWER:  3-- How long can the whole machine system work without stopping?ANSWER: 4-- What are the ingots min. -max. SIZE of the ingot mold.? ANSWER: 5-What are the ingots min. - max. Kg  of the ingot mold? ANSWER: 6-- Is the Liquid separation system Automatic?? ANSWER: 7-- Ingot casting Running speed i,is it adjustable?IF YES, please write ,How far does the meter go per minute?ANSWER:  8.How many tons of ingots goods can be cast per hour.? (example id the ingot mould 10 KG.!) ANSWER:9-- How much is the EXW PRICE for 1 SET Automatic Rotary Furnace Casting with  Conveyor Mould Machine Line.?(Remark 100% Clear what is include price -whats NOT.!!ANSWER: Please write from the whole Automatic Rotary Furnace Casting and  Conveyor Mould Machine Line the Size / dimension .....etc.Please send full specification information to us with a drawing,pictures and  Technical data sheet.!Like  Max melting temperature,Recycling rate as TON ,whole weight 1 SET, Which Induction Furnace type,Which Furnace tilting,what kind of scrap can melt and casting,Melting time/speed .?....,what the Input voltage.?, can it work also 220VAC.?..., is it easy to operation...?..,And please also send new fresh  true pictures and videos to us  from the whole system.Please also remake delivery time for this kind of system! And how do you make Loading.?Can you the whole system 1 SET 20 feet container or how do I send it.?? Not: At the beginning four our aim ,need a system line  it cam made 2-5 ton per hour ingot goods !Later we will see what happened and  Is it necessary to increase capacity tons?

Quantity: 12 Each BLOWER,ALUMINUM,60 HZ,JY3-SF,ZGLJF BLOWER MANUFACTURER : ZGLJF PART NO : JY3-SF BODY MATERIAL : ALUMINUM FREQUENCY : 60 HZ ROTATIONAL SPEED :1700 RPM TYPE : MOVABLE VENTILATOR VOLTAGE : 220 V ADDITIONAL DATA DIAMETER: 18 IN WATT: 750 W