Good day! Can you please provide price and delivery time for: 1. OD 1/16 in * WT 0.02 in, acc to ASTM A269, seamless, in coil, inside is cleared of dust and organic matter, total 1000 meters (EXW or FOB base in CNY). 2. OD 1/8 in * WT 0.02 in, acc to ASTM A269, seamless, in coil, inside is cleared of dust and organic matter, total 1000 meters (EXW or FOB base in CNY). Also please tell me what length of the coil will be for each size - 1000, 500, 100, other? 

Dear Sir or Madam, I would like to ask you for a cost estimate for perforated sheets. Please for two materials stainless steel 316 and aluminum 99.5. EN AW-5083 3.3547 (ALMG4,5MN0,7). The contact surface must be flat. The materials must not contain zinc or zinc alloys. We only need rectangular plates. They don\'t have to be sawn exactly. It doesn\'t matter whether they are 4 or 5 mm longer or shorter. I gave you the dimensions in my first message. For us, it is important that the edges are rounded so that nobody injures themselves. The materials must be resistant to corrosion, heat >120°, high humidity 95 %. 76 pieces (perforated plates) with the following parameters: Length: 108 cm Width: 98 cm Thickness: 1.5 ≤ 2 mm 22 pieces (perforated sheets) with the following parameters: Length: 98 cm Width: 81 cm Thickness: 1.5 ≤ 2 mm 18 pieces (perforated sheets) with the following parameters: Length: 90 cm Width: 60 cm Thickness: 1.5 ≤ 2 mm 8 pieces (perforated sheets) with the following parameters: Length: 200 cm Width: 100 cm Thickness: 1.5 ≤ 2 mm For all sheets we want round hole diameter 3 cm. Distance between two holes (from center point to center point) min. 40 ≤ 50 mm. Hole pattern single row. The number of holes at your own discretion. 

Need flaring machine for steel and stainless steel tubes What is the cost

Dear Mr./Mrs I’m Johnny – The International Business Development Manager of Steel Machine of The HONG KY CORP. – Vietnam (www.hongky.com). We are looking for Chinese factories that can manufacture : - The High frequency Welding Machine for Tube Mill Line (100kW-150kW-200kW-250kW-300kW-400kW-500kW). - The High speed Slitting Line with key parameters as below : 1. Material: steel and stainless steel 2. Coil width: 2.0m 3. Coil thickness: from 6.0mm to 12mm 4. Maximum coil weight: 30 tons 5. Inner diameter of coils: 508mm 6. Outer diameter of coils: 2.000mm 7. Maximum slits a time: 8 slits per time 8. Speed demand : 100m per minute 9. Other demands: motor AC - The Tube Mill Line with key parameters as below : 1. Pipe diameter: from 100mm to 200mm 2. Pipe thickness: from 3.5mm to 10mm 3. Material : hot roll coil 4. Other demands : motor AC If your factory can produce the above products, please send me the information. We will arrange a directly visit to your factory in the March 2024. I hope to receive your feedback as soon as possible. Thanks and best regards

test report and catalogue

Good day, please send your contact emails for sending an Inquiry. Best regards, Alexey

Buenos dias, necesitaria contacto de ventas