we need: Teflon shoe, sp-420 - 70 pcs. stb-200 - 35 pcs. knife 3100512 \"Yamato\" - 5 pcs. knife 3100513 - 5 pcs. knife 350218 - 5 pcs. knife 350220 - 5 pcs. knives 202295 - 30pcs. steam trap 001 for steam iron - 4 pcs. BSP-300 full steam iron - 4 pcs. Heating tube 9KW 150 for boiler parts - 2 pcs. 6 PCs sharpeners for Oshima. 20-PCs needle plate for Tajima embroidery machine. Heating tube 9kW 150 for boiler parts - 2 pcs. 143169 Needle plate-20PCs.

i need 2 round steel knifes OD 150mm x55mm  thickness 2mm  for paper core cutting machine 22 round steel  knifes OD 75 mm x 25mm thickness 2mm 500 tungsten blades 60mm x20mm  thickness 0.2mm for opp slitter pls inform me if you can supply.

Inquiry About Steel header pins with nickel plated [Office supplies]

Can I have a quotation for PET tube with a flat bottom and a stainless steel cover. I am looking for 18 length. Its for vanilla product. 

we are looking to purchase insulation materials of Aluminized Steel, Polyisocyanurate and Mineral Wool material, as well as accompnying tools, equipment and accessories required to accomplish hot and cold insulation work. Please, get in touch with me to obtain detailed requirements. Thank you

Kindly advise the price of the item below: EDGE STRIPS, FOR STAINLESS STEEL CATHODE PLATES QTY:1000 regards KAYNAT LIMITED

Good day! Can you please provide price and delivery time for: 1. OD 1/16 in * WT 0.02 in, acc to ASTM A269, seamless, in coil, inside is cleared of dust and organic matter, total 1000 meters (EXW or FOB base in CNY). 2. OD 1/8 in * WT 0.02 in, acc to ASTM A269, seamless, in coil, inside is cleared of dust and organic matter, total 1000 meters (EXW or FOB base in CNY). Also please tell me what length of the coil will be for each size - 1000, 500, 100, other? 

Dear Sir or Madam, I would like to ask you for a cost estimate for perforated sheets. Please for two materials stainless steel 316 and aluminum 99.5. EN AW-5083 3.3547 (ALMG4,5MN0,7). The contact surface must be flat. The materials must not contain zinc or zinc alloys. We only need rectangular plates. They don\'t have to be sawn exactly. It doesn\'t matter whether they are 4 or 5 mm longer or shorter. I gave you the dimensions in my first message. For us, it is important that the edges are rounded so that nobody injures themselves. The materials must be resistant to corrosion, heat >120°, high humidity 95 %. 76 pieces (perforated plates) with the following parameters: Length: 108 cm Width: 98 cm Thickness: 1.5 ≤ 2 mm 22 pieces (perforated sheets) with the following parameters: Length: 98 cm Width: 81 cm Thickness: 1.5 ≤ 2 mm 18 pieces (perforated sheets) with the following parameters: Length: 90 cm Width: 60 cm Thickness: 1.5 ≤ 2 mm 8 pieces (perforated sheets) with the following parameters: Length: 200 cm Width: 100 cm Thickness: 1.5 ≤ 2 mm For all sheets we want round hole diameter 3 cm. Distance between two holes (from center point to center point) min. 40 ≤ 50 mm. Hole pattern single row. The number of holes at your own discretion. 

I want to order for shipment to Canada, please: 4 - 4-inch stqinless steel cowl vents with deck plates 2- 3-inch stainless steel low-profile cowl vents with deck plates
Four 4-inch stainless steel cowl vents with deck plates Two 3-inch stainless steel cowl low-profile vents with deck plates For delivery to Canada, please.

Our customer looking for a different type of  Batten screws / Bugle heads ( using for timber), Hex Head coarse Thread, Galvanised Base Plate ( 150 x 150, 150x 65, 130 x130, 5mm thickness with 4 wholes) Floor Mount Base plate , double side key lock, steel cap, Galvanised plastic cap, Hinges, weld on bolt-on hinges, Drop bolt, Hex Flanges washer, Gate wheel, U Braket, etc all type of hardware wooden fixing parts 

we are looking for GI conduit

Need flaring machine for steel and stainless steel tubes What is the cost

Weare looking for Tyre Tooling Equipments and Moulds for tyre size 4.00x8. Enquiry lists are as below and pls provide to me the best offer price accordingly as we have to bid on the tender project. Enquiry Lists Carcass Laminating machine Tyre Building Machine Tyre Curing Machine Post Cure Inflator Tyre Moulds  4.00-8 Tube Moulds 4.00-8 Curing Bladder Moulds 4.00-8 Tread Extruder Die Tube Extruder Die Bead wire discharging plate (Including Die ) Tube joining machine press foot Tread Storage Cart Curing Machine for Bladder Green Tyre Hole Punching Machine and Compacting Machine (2 in 1) 

hi
Do you have carbo steel plates and tube ?
Can i see catalog of your ?

Hi
I'm looking for Hr Plate
Could you please add my 
I'll send you inquiry there

Please. We  need serrated flat plate 30*3 and 40*3 A36 steel. Minimun sale and delivery time. Best Regards

Dear Mr./Mrs I’m Johnny – The International Business Development Manager of Steel Machine of The HONG KY CORP. – Vietnam (www.hongky.com). We are looking for Chinese factories that can manufacture : - The High frequency Welding Machine for Tube Mill Line (100kW-150kW-200kW-250kW-300kW-400kW-500kW). - The High speed Slitting Line with key parameters as below : 1. Material: steel and stainless steel 2. Coil width: 2.0m 3. Coil thickness: from 6.0mm to 12mm 4. Maximum coil weight: 30 tons 5. Inner diameter of coils: 508mm 6. Outer diameter of coils: 2.000mm 7. Maximum slits a time: 8 slits per time 8. Speed demand : 100m per minute 9. Other demands: motor AC - The Tube Mill Line with key parameters as below : 1. Pipe diameter: from 100mm to 200mm 2. Pipe thickness: from 3.5mm to 10mm 3. Material : hot roll coil 4. Other demands : motor AC If your factory can produce the above products, please send me the information. We will arrange a directly visit to your factory in the March 2024. I hope to receive your feedback as soon as possible. Thanks and best regards

Hello, I want the price of ck30 sheet, 1 meter wide
Diameter 1 mil

Good day, please send your contact emails for sending an Inquiry. Best regards, Alexey

Buenos dias, necesitaria contacto de ventas

Hello! I am interested in springs according to DIN 2093 and ISO 10243. If you produce such springs, I will be glad to receive a price offer from you. Thank you. Disc springs DIN 2093  (CK 67  or 51CrV4) 31.5x16.3x1.25х2.15- 1000 pc 31.5х16.3х2х2.75- 1000 pc 35.5х18.3х0.9х2.05- 1000 pc 35.5х18.3х1.25х2.25- 1000 pc 125х71х8(7.5)х10.9- 200 pc ISO 10243 tool springs 16x25 green - 2000 pc 20х76 red - 200 pc 40х115 red - 50 pc