We are seeking a 640kVA diesel generator set with the following specifications:

Main parameters:
- Prime power: 570kVA/456kW
- Standby power: 640kVA/512kW
- V-12 turbocharged engine with ≤26.6L displacement
- Fuel consumption: ≤124L/h (100% load), ≤95L/h (75% load), ≤64L/h (50% load)
- System capacities: 59L oil, 120L coolant, 1120L fuel tank

Alternator requirements:
- 400/230V 50Hz 3-phase brushless design
- H-class insulation and IP23 protection
- AVR voltage regulation with ±1% accuracy
- 110% overload capacity for 1 hour

Control panel must include:
- Manual/automatic operation modes
- ATS and automatic load sharing
- Under-frequency protection
- Emergency stop function

Essential configuration:
- Soundproof canopy
- Automatic battery charger
- Fuel tank heater
- Lockable fuel filler cap
- Complete cable set

Please provide technical compliance confirmation with your quotation.

Require a custom-built misting system with below specifications:

Dual-Liquid Dosing:
- Two separate 5-20L concentrate tanks
- Automatic proportional mixing (1-2% per liquid)
- Integrated with main water line

Pump Requirements:
- Stainless steel plunger pump
- 50-70 bar pressure capacity
- Flow rates: 1L/min (20 nozzles), 3L/min (60 nozzles), 12-15L/min (300 nozzles)

Nozzle Specifications:
- Stainless steel/brass construction
- 3-10μm droplet size
- Anti-drip function

Control System:
- Digital/PLC controller with dosing ratio adjustment
- Programmable misting intervals and cycles
- Optional remote/app control

Compact design preferred (≤50cm x 60cm). Pre-filtration system required to prevent nozzle blockage.}

We require marine-approved dual fuel generators for immediate delivery. Specifications must include:

1. Main Generators (3 units):
- 1000KW/750KW capacity options
- 380/440V, 50/60Hz
- Tier II/III compliance
- Central/local/remote control with synchronizing circuits
- Integrated exhaust scupper system and economizer

2. Secondary Generator (1 unit):
- 400KW capacity
- 380/440V, 50/60Hz
- Tier III compliance

3. Emergency Generator (1 unit):
- 45KW capacity
- 380/440V, 50/60Hz
- Tier III compliance

All units must be new/unused/surplus condition with complete foundation components. Priority given to suppliers with ex-stock availability.

I need to purchase 1 unit of AC7K04 control panel for EV charging applications. Please provide detailed pricing information and confirm product availability. The component must be compatible with single-phase AC charging systems in new energy charging boxes.

I need to purchase 1 piece of hydraulic main control valve for excavators. Interested in models: LS30V00002F3, LS30V00002F2, LS30V00002F1, SK460, SK460-6E, SK480, SK480-6E. Please provide the price.

Looking for main control valves compatible with UX28, UX28-86, and SE240LC-3 excavator models. Require genuine parts for replacement purposes. Please provide specifications and pricing.

 
We require a double-sided high-speed rotary tablet press with the following specifications:  
- EU-B tooling (61 stations)  
- Capacity to produce ?16 mm tablets  
- 100 kN pre-compression & main compression  
- Interchangeable turret system  
- Force-feeding mechanism  
- Servo control system  
- Compliance with 21 CFR Part 11  

Production requirements:  
- Target output: 150,000 tablets/hour (sustained realistic capacity)  
- RPM confirmation needed for ?16 mm tablets  

Please provide:  
1. Lead time for delivery  
2. EXW/FOB pricing details  
3. Warranty terms  
4. Installation/training support  
5. Spare parts and tooling quotations  

Manufacturers with equivalent specifications meeting these requirements are welcome to quote.  

Inquiry about UX28-86 MCV VOE14576336 main control valve EC210B EC210BLC Excavator Hydraulic valve

Received an inquiry from a client for 2 devices of the “In-line Annealing Machine” required for the production line. Technical information: working principle - non - contact induction heating annealing; suitable for square or round conductor; solenoid inner diameters 15mm and 25mm with internal ceramic tubes; maximum annealing temperature 650°C; temperature control modes: automatic with line speed tracking and local manual control; main power supply and operation frequency to be mentioned; cooling water supplied 150 L/min, inlet temperature below 35°C; device should have touchscreen interface; main equipment dimension to be specified; contract and bank guarantee for minimum 12 months required; complete documentation and software backups to be provided; specify the brand and manufacturer of all equipment and send catalogue and technical specification; determine the price of each spare part separately. 

We operate a factory producing artificial stone panels and are looking for production line solutions for both of the following processes: 1. Spray cement-based adhesive onto EPS/XPS boards (20–40 mm thick) and laminate fiberglass mesh (120 g/m2). 2. Apply fiberglass mesh (120 g/m2) onto EPS/XPS boards (20–40 mm thick) followed by a cementitious (polymer-modified) base coat using screed/doctor blade or knife-over-roll. Both processes should meet the following main parameters: - Working width: 1,250 mm - Production speed: ~8 m/min (~600 m2/h) - Controls: PLC, recipe control, thickness

Today we are looking for Co2 Welding Cable. The product is a cable that combines the control line, power line, and gas line between the welding machine body and the wire feeder used in CO? welding. By developing new materials, the cable has been made lighter, and its mobility and durability have been improved, resulting in enhanced productivity and safety. The main structure consists of annealed copper wire for electrical use, tinned ann

Hello, please send us your best offer for a HOSPITAL WASTE INCINERATOR conforming to these technical specifications Features Complete combustion at temperatures above 1000 °C Safe destruction of all pathogens Incineration rate of 5 to 20 kg of waste per hour, low fuel consumption Flame retardant lining for temperatures up to 1250 °C Modular design for easy on-site transport and assembly Incinerates up to 8 cubic feet (.22 cubic meters) per load, 330lbs (150kg) per day Ready to use upon delivery Minimal training Easy to operate with state-of-the-art controls Automatic, pre-set cycle control for startup and shutdown Dual chamber combustion and high exhaust temperatures in excess of 1000°C Thermostatic temperature control for efficient fuel consumption On board 40-gallon fuel tank Manufactured in ISO 9001:2008 certified facility Temperature measurement while cycling. Capacity: 10-15 of waste per hour Weight: 907Kg (approximately 2000lbs) External Dimensions: WxDxH= 730x 900x1300mm Size main chamber: WxDxH=430x330x700mm Chimney Height: approx. 6 m above incinerator Temperature resistance of lining: 1250°C Electrical: 230v 50Hz Fuel: Diesel 10-20 KW, 2-3l/h After sales service: Yes, installation and start-up. Present a catalog: Yes, Request Warranty: 3 years Transport: Transportable by air on standard EURO pallet As well as its transport costs from your home to the port of Lomé in Togo

Looking for domestic gas burner electronic control manufacturers. Need to know who can manufacture electronic circuits connected to the mains, drive a gas valve and generate sparks. 120Vac gas ignition control. Electric pulse oven igniter.

We are contacting regarding the procurement of equipment for thermal post - treatment of recovered carbon black (rCB) produced from pyrolysis of end - of - life tires. We are operating a fine grinding and air classification system and looking to integrate a high - temperature thermal treatment stage. Request a proposal (quotation & technical specifications) for required equipment (continuous rotary kiln or tube furnace for rCB thermal treatment, specific working conditions, capacity, temperature range, etc.) and deliverables (main equipment, control cabinet, feeding and discharging systems, etc.). Appreciate response with available models, technical datasheets, and pricing.

We are planning the construction of a battery storage system consisting of two containers and ask for a quotation for the delivery and installation of a complete fire detection and gas extinguishing system. Project Name: Battery Storage System Saxony. Requirements: 1. Fire Detection Technology: Dual - detector dependency with pre - alarm and main alarm, control via a central fire alarm control panel (2 loops), installation of optical - acoustic signaling devices, room monitoring including duct smoke detector, fire brigade route cards according to DIN 14675, fiber optic networking of the control panel in ring topology, visualization and operation via touch panel (optional with remote access), 30 - hour battery backup in accordance with DIN 14675. 2. Main Control Unit

Our group is planning to install complete solar pumping systems across 11 water stations in Syria. Seeking FOB quotation in USD for equipment and components including solar panels (dual facial, 590W), solar inverters for water pumps (125kW, 75kW, 55kW, 37kW, 22kW, 7.5kW, 5.5kW), wave filters, main electrical distribution panels, electrical control panels for submersible pumps, DC cables (110mm?2 and 116mm?2), grounding system, lightning protection system, off - grid solar systems with batteries, metal mounting structures for solar panels, lithium batteries (24V, 230Ah). Refer to attached files for details. Group is also interested in importing large - quantity photovoltaic modules for Syrian market, especially in reconstruction phase. Ask for best offer per watt for 720 watts n - type Topcon and 720 watts n - type HJT tech. Competitive pricing, product quality and lead times are critical. Anticipate additional similar projects in the future.

We are interested in purchasing two complete center pivot irrigation systems with the following specifications: 1. System 1: - Coverage area: 4 hectares - Water source: Borehole - Control system: Fully automatic - Fertigation unit: Included 2. System 2: - Coverage area: 20 hectares - Water source: Borehole - Control system: Fully automatic - Fertigation unit: Included Additional Notes: - Electricity is available on-site (380V, 3-phase). - Please include end gun if it improves coverage. - Shipping destination: Port of Algiers, Algeria. - Please provide your best CIF and FOB prices, detailed technical specifications, and: - Pivot length and number of towers/spans - Sprinkler type and distribution rate - Main pipe material and wall thickness - Gearbox and motor specs - Power consumption per system - Fertigation system specs - Delivery time - Warranty terms (years/hours) - Total weight and volume of shipment

ALUMINIUM DOSING PUMP. Motor driven with the following specifications. Key Specifications: 1. Nominal Flow Rate: 4000l/h per head; 2. Number of Dosing Heads: 2; 3. Approvals: CE, EAC, CNROHSEX; 4. Non - Return Valves: Standard type for both inlet and outlet. Materials and Installation: 1. Materials: Suitable for handling aluminium sulphate solution; 2. Max Operating Pressure: 10 bar (at 50 Hz); 3. Max Permissible Inlet Pressure: 0.8 bar. Liquid and Electrical Details: 1. Pumped Liquid: Aluminium sulphate solution; 2. Temperature: 20?°C; 3. Density: 998.2 kg/m?3; 4. Mains Frequency: 50 Hz; 5. Rated Voltage: 3x230/400V; 6. Enclosure Class: IP55; 7. Viscosity: 50mPas. Controls: 1. Control Panel

C8-FMCB2 (MAIN CONTROL SHELF )
PLEASE  PRICES SEND ME

Controller Main Power Circuit Assembly

could you help me please having a quotation for : Controller Main Power Circuit AssemblyModel. 

Hello, I\'m sending this enquiry in order to ask if you could provide us with a customized product as I\'m going to describe below. We’d need an inflatable snow ball to be inserted in our show as a scenographic element It must be carried on stage already inflated so it must be of suitable dimensions to fit the doors which are 4x4.4m/h For this reason, we’re thinking to create a quite “oval” snow ball, as the reference in attachment, the dimensions of which are 350*600*320/h cm. Besides, we’d need to have a specific scenography into the snow ball that is a relief map of the city of Milan (IT), representing 2 main scenarios (one is the urban city, the other is the landscape around the city) and having automated elements inside, for example, an electric toy train along its track.. please see the reference in attachment, that is just an idea of something we have yet to design as it will really be. This means that the remote control inside the sphere should be foresee not only the blower to inflate it, but also the required equipment to control such moving elements and the snow ( all in different moments), as conceived at the moment. That said, we’d be really pleased for having a feedback on the feasibility of our creative idea and an estimated delivery time and full cost, including shipping /customs etc. Please, do not hesitate to ask for any further clarification could help to answer to my request Thank you very much P.S. how can I share attachments as references?

spare parts of Huawei C&C08 SPC Switch
C8-FMCB2  OF MCB MAIN CONTROL SHELF NO. 5X

would like to have your offer for the supply of the following tender items with lead time and Data sheet. MPPT charge controller, efficiency not less than 92 %, and shall meet the following specifications. voltage, as per technical specifications Controller must utilize passive cooling (not fans); Should allow parallel operation, i.e more than one unit can be connected in parallel. Controllers to be certified CE or UL and to meet at least one for the following or equivalent standards IEC 62509 or IEC 62093; The device should have LED or LCD display. Equipped with SPD in the upstream input for each Charge Controller. Product warranty shall be 5 years. 228 Pcs MPPT Charge Controller Rated 85A - 100 A, at least 150 VDC input voltage. 148 Pcs MPPT Charge Controller Rated 100 A, at least 150VDC input voltage. 83 Pcs MPPT Charge Controller Rated 100 A, at least 450VDC input voltage. Off-Grid Inverter single phase, pure sine wave, 230 V, 50Hz as per below technical specifications. - The inverter shall produce pure sine wave form with provision for battery charger, and it can be configured individually or in parallel - Output frequency shall be 50 Hz - Designed for indoor enclosure not less than IP 20 - Maximum efficiency should be not less than 90 % at full load - To be certified to meet at least CE and UL marking and complaint with IEC 62109 - The device should be integrated with LED indicators or LCD display - It shall allow adjustment of battery voltage and charging current - The device shall allow connection to grid and/or backup generator(s) - The charging function of the inverter/charger shall include battery charging functionality   and the inverter shall be wired in ways that make use of the inverter battery charging   functionality if the installation includes either mains power or a diesel generator. - Protections required: AC overload and load short circuit, overvoltage, overheating and battery reverse polarity - The inverter shall allow internet connection for remote monitoring - Product warranty shall be 5 years. 22 Pcs 7KVA Solar Off-Grid Inverter. 69 Pcs 10KVA Solar Off-Grid Inverter. . 116 Pcs 15KVA Solar Off-Grid Inverter.