Fio de ferro puro de super qualidade DT4C - Resistência à tra??o de 176-274MPa, Dureza HV5≤195

Nome do Produto: Bobina de Barra Fria de Ferro Puro Eletromagnético

Categoria: Ferro Puro / Ferro Puro Industrial / Ferro Puro Eletromagnético

Lugar de Origem: Taiyuan, Shanxi, China

Marca/Fabricante: TISCO (Taiyuan Iron & Steel Co., Ltd.)

Grau: DT4C

Especifica??o (Diametro): ?6,5 mm a ?20 mm

Diametros Disponíveis: 6,5, 8,0, 10, 12, 14, 16, 18, 20 mm

Padr?o Executivo: GB/T 6983-2008（PRC）

Condi??o de Entrega: Acalorado

Tolerancia: De acordo com GB/T 14981（PRC）

Qualidade de Superfície: De acordo com GB/T 701（PRC）

Inspe??o & Regra para Reinspe??o: De acordo com GB/T 2101（PRC）

Embalagem: Feixes Amarrados com A?o

Peso do Feixe: Aproximadamente 1000 kg

Processamento Subsequente: O material pode ser estirado a frio (em barras ou varas retas) ou conformado a frio.

Propriedades Físicas:

? Densidade: 7,85 g/cm3

? Dureza Superficial: HV5≤195 / HBS 50-80

? Resistência à Tra??o (R?): 176 - 274 MPa

? Redu??o de área (Z): 70% - 80%

? Resistência à Esfor?o de Escoamento (R?L): 0,298 - 166 MPa

? Tenacidade ao Impacto (KV): 160 - 200 J/cm2

? Alongamento após Fratura (A): 30% - 50%

Propriedades Magnéticas:

Coercividade (Hc): ≤ 32 A/m

Permeabilidade Máxima (μ?): 0,0151 H/m

Indu??o Magnética: Consulte a Tabela de Propriedades Magnéticas.

Tabela de Propriedades Magnéticas GB/T 6983-2008

Composi??o Química:

Requisitos Padr?o

C≤0,010、Si≤0,100、Mn≤0,250、P≤0,0150、S≤0,010、

Al0,2~0,8、Ti≤0,020、Cr≤0,10、Ni≤0,050、Cu≤0,050

Composi??o Química: Típica / Referência Atual

C≤0,0030、Si≤0,010、Mn≤0,20、P≤0,009、S≤0,002、

Al  0,520、Ti≤0,010、Cr≤0,010、Ni≤0,010、Cu≤0,01

Principais Características:

(1)、Excelentes Propriedades Eletromagnéticas: Baixa coercividade (Hc), alta permeabilidade (μ), alta densidade de fluxo magnético de satura??o (Bs), magnetismo estável e sem envelhecimento magnético.

(2)、Alta Pureza: A série de ferro puro eletromagnético s?o a?os completamente desoxidados e passam por processos de refino, resultando em uma estrutura interna densa, uniforme e superior com baixo teor de gases. O teor típico de carbono no produto final é<0.004%, which provides reliable conditions for users to simplify and shorten the part annealing process.

(3)、Good Cold and Hot Workability:

Cold working such as turning, upsetting, punching, bending, and drawing can be performed without issues.

Hot working, such as re-forging or re-rolling, shows low sensitivity to red shortness. Many grades have no red-shortness range, allowing processing within a wide temperature window.

(4)、Good Surface Quality: Exhibits excellent weldability and plating performance.

(5)、High Dimensional Accuracy: Can supply ultra-precision cold-rolled sheets. For sheet thickness ≤1.5mm, the thickness tolerance can be guaranteed within ≤±0.03mm; for thickness >1.5mm, the tolerance is within ≤±0.05mm.

Applications:

Electromagnetic pure iron is primarily used in the electrical, telecommunications, instrumentation, and advanced defense industries to manufacture electromagnetic components and iron cores.

1.  Relay Cores, Armatures, and Yokes in electrical and telecommunications systems: For relays in automatic telephones, railway signal relays, and various purpose relays (e.g., thermal, pulse, time-delay, special type) used in communication and automatic control systems, as well as relays for electrical control equipment.

2.  Core Material for Electromagnets: Iron cores for bending and focusing magnets in high-energy accelerators, acoustic devices, solenoid valves, and electromagnets for magnetic separation equipment.

3.  Soft Magnetic Components for Instruments and Meters: High-resolution pole pieces for analytical instruments, electromagnetic separators and detectors in geological instruments, focusing magnets for electron microscopes and electromagnetic lenses for scanning electron microscopes, aircraft automatic control components, and pole pieces for magnetizers.

4.  Cores and Housings for DC Motors: Such as those used in aviation DC motors.

5.  Electrical and Magnetic Parts for Automobiles, Tractors, and Machine Tools: Including automotive voltage regulators, flashers, starters, horns, electromagnetic chucks for machine tools, magnetic plates, and other magnetic conduits.

6.  Magnetic Shielding Equipment: Various magnetic shielding casings or boxes, and shielding materials for applications requiring high shielding effectiveness.

Ordering Instructions:

(1) Select the correct grade: Grades DT3 and DT3A do not guarantee freedom from magnetic aging. For guaranteed non-aging properties, order DT4 (A, E, C). Magnetic performance levels are Standard, Advanced (A), Extra High (E), and Super (C). For higher magnetic performance, specify higher grades (E, C).

(2) Guaranteed properties: The electromagnetic pure iron series generally guarantees electromagnetic performance; chemical composition is not the acceptance criterion unless specified by the customer in the contract.

(3) Magnetic annealing: The electromagnetic properties of our products are measured on test samples after magnetic annealing. However, products are delivered in hot-rolled, hot-forged, or softened annealed (for cold-rolled/cold-drawn material) conditions. Therefore, to fully realize the material's magnetic potential, parts must undergo magnetic annealing after manufacturing.

* Simplified Annealing Process (if carbon content ≤ 0.007%): 850°C for 3 hours.

* Standard Annealing Process (if carbon content > 0.007%): Follow the process specified by the Chinese National Standard (GB).

(4) Standard magnetic tests: Typically, only coercivity (Hc) and post-aging coercivity are routinely tested. If guarantees for magnetic induction (B) or maximum permeability (μm) are required, please specify this in the contract.

(5) High-precision cold-rolled material: For extra-thickness precision in cold-rolled materials, please order Super Precision Cold-Rolled Sheet according to standard YB(T) 34-86.

(6) Custom specifications: For requirements exceeding current GB or YB(T) standards, we can negotiate and establish a separate technical agreement for supply.

(7) Delivery time: For standard, non-processed goods, the delivery period is typically 1-2 working days. For goods requiring additional processing, the delivery time will be determined based on the complexity of the drawings.

(8) Contact for more information: For further data, inquiries, market information, technical knowledge, or quotes, please call our customer service hotline at 400-698-0073.

(9) Information accuracy disclaimer: Due to the vast amount of online information, priAs condi??es e termos de entrega listados nos sites podem n?o sempre estar atualizados. Agradecemos a sua compreens?o. Entre em contato diretamente conosco para obter informa??es precisas e atualizadas. Todos os detalhes est?o sujeitos à confirma??o final após inquérito.