Emerson KJ1501X1-BB1 DeltaV System Power Module – Stable Backplane Power for DeltaV M?series Nodes

• Warranty: 365 days

• Lead time: 1 week if in stock; no more than 1 month at the latest

• Payment: 50% advance payment; full payment prior to delivery

• Express options: FedEx, UPS, DHL

• Designed for DeltaV M?series carriers – Plugs directly into standard M?series horizontal or vertical carriers; no special adapters.

• 24 VDC system distribution – Feeds regulated 24 VDC to the backplane to power controllers and I/O, keeping field hardware isolated from bulk supply variations.

• Redundancy-ready – In many cases you can fit two power modules on the same carrier for automatic failover; replacement of one unit is typically possible without process interruption.

• Front-panel status LEDs – Quick at-a-glance health and fault indication; useful when you’re troubleshooting in a crowded cabinet.

• Robust mechanical design – Positive latching and keyed mechanical alignment help avoid mis-insertion and vibration issues over long service cycles.

• Low-touch upkeep – No configuration software; just reliable backplane power with routine visual checks.

This module is typically specified anywhere a DeltaV M?series node is installed: refining and petrochemicals, specialty chemicals, power generation (including CCGT and CHP), pharmaceuticals, food & beverage, and water/wastewater. A maintenance lead at a mid?size chemical plant summed it up well: “Once we paired the KJ1501X1 modules for redundancy, power alarms practically disappeared during switchovers.”

• Reliability you can plan around – Stable 24 VDC backplane power reduces nuisance trips and intermittent faults tied to marginal supplies.

• Compatibility baked in – Purpose-built for DeltaV M?series carriers; no third-party adapters or rewiring tricks.

• Redundancy without complexity – In many cases, two modules share load and provide seamless failover; that translates to fewer planned outages.

• Lower lifecycle cost – Minimal maintenance, quick replacement, and long service life help trim OPEX over the system’s lifecycle.

• Practical support – Straightforward diagnostics and established install practices speed up commissioning and troubleshooting.

• Cabinet standards – Install in a clean, dry, ventilated control cabinet; follow DeltaV M?series carrier spacing and mounting guidelines.

• Power wiring – Supply from a regulated 24 VDC bulk source sized for full node load plus redundancy margin; use correctly rated conductors and protective devices.

• Ventilation – Provide airflow to avoid heat buildup around the carrier; avoid bundling power with high-noise cabling.

• Safety – De-energize the bulk 24 VDC feed before first installation; with redundant pairs, one unit can typically be replaced online, but follow site MOC and LOTO procedures.

• Routine checks – Periodically inspect terminal tightness, look for discoloration or dust buildup, and verify status LEDs during PM rounds. Firmware updates are not applicable to this power module.

• Conformity: CE

• Safety: UL recognized (typical for DeltaV M?series modules)

• Environmental: RoHS compliant

• Manufacturing Quality: Produced under ISO 9001 quality systems

• Warranty: 365 days