Ready Meal Retort Machine

Friendly reminder：This price is a deposit. Please contact us before placing an order to discuss your detailed requirements and obtain an accurate quotation to avoid any unnecessary trouble.

Working principle:

Put the product into the sterilization retort and close the door. The retort door is secured by triple safety interlocking. Throughout the whole process, the door is mechanically locked.

The sterilization process is automatically carried out according to the recipe input to the micro-processing controller PLC.

This system is based on the direct heating for food packaging by steam, without other heating media (for example, the spray system is used water as an intermediate medium). Since the powerful fan forces the steam in the retort to form a cycle, the steam is uniform. Fans can accelerate the heat exchange between steam and food packaging.

Throughout the whole process, the pressure inside the retort is controlled by the program by feeding or discharging compressed air through the automatic valve to the retort. Due to steam and air mixed sterilization, the pressure in the retort is not affected by temperature, and the pressure can be set freely according to the packaging of different products, making the equipment more widely applicable (three-piece cans, two-piece cans, flexible packaging bags, glass bottles, plastic packaging etc.).

Q: What methods of payment are acceptable?A: FOB, CFR & ClF optional; it's mainly depend on client's requirement,Accepted payment types: T/T, L/C; Q: What can you buy from us?

A: Water spray retort, immersion retort, steam retort, steam and air retort, rotary retort, lab retort. 

Q: How can we guarantee the quality? 

A: Always a pre-production sample before mass production;Always make a final inspection and trial running before delivery.

Q:Do you have machines in stock? 

A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers'requirements. 

Q: What's the lead time after placing order? 

A: Usually it takes about 2-3 months after we received your deposit. However, it would depend on our production line schedule (the timing clients place order) and the complication of the item. 

Q: What is the cost of shipping? 

A: Shipping cost is based on the following elements: 

1. Type of container needed 

2. Number of packages 

3. Gross weight 

4. Package volume 

5. Destination port 

Q: what is the installation and training methods?

A: Our engineer will inspect and guide the installation of the equipment and the connection of the pipeline on site until the equipment is running smoothly.